69 camaro hideaway headlight grille experts?

[snappytravis]

I finally received all my parts for the hideaway headlight setup. I purchased a kit from Ricks Camaros. I have a few questions on a few parts. It came with the DSE door motors. I am pretty clear on all this and mounting the headlight doors. I just would like a little help on the rear actuator brace, and there is also a smaller brace aprox 1/4 inch rod with holes on each end 8" long or so. If anyone has a few pictures I would appreciate it. Just will save me some time and head scratching.
Thanks

[Bryan O]

Should be in the AIM somewhere:

http://www.scribd.com/doc/32913817/69-Camaro-AIM

[tubbed69]

Travis I can get some pics of mine but it will be Monday if that will be any help,just let me know.

[snappytravis]

Originally Posted by Bryan O

Should be in the AIM somewhere:

http://www.scribd.com/doc/32913817/69-Camaro-AIM

Awesome, , a copy of the Camaro Bible! I actually ordered a fisher body manual a while back. Has everything that you don't need to know in it.. I was actually going to order one tonight. They send the brackets the the original vacuum actuators mount to. Don't think I need them other then to maybe for inner fender bracing..
Thanks Travis

[snappytravis]

Originally Posted by tubbed69

Travis I can get some pics of mine but it will be Monday if that will be any help,just let me know.

I think I have it pretty well figured out, I went with the gm grille and it fit great. I also used the dse headlight motors. I had them working tonight and they seem to be perfect. I just don't quite understand why they send the actuator brace, that runs behind the vacumn type actuators. I will see If I still need it just for a brace tomorrow. Thanks for the reply buddy!