Chassisworks/Marquez SEMA Camaro Sneak Peek

[Al Moreno]

Originally Posted by Streetking

Just when you think you have seen it all.. damn, great job guys!

Word!

[SLO_Z28]

Are you guys doing installs on your new cages at your shop?

[Chassisworks]

Originally Posted by SLO_Z28

Are you guys doing installs on your new cages at your shop?

At this time we are not. We have been contemplating getting back into building cars after ten years as solely a manufacturer. Ask me again in a few weeks/once the SEMA afterglow wears off a bit.

[Chassisworks]

The car is in the booth and the sign is spinning. It's SEMA time!

There were a couple more new pieces posted today on the Sneak Peek page. I'm flying out in the morning so check back later for a full data sheet. Here's the crib notes.
- Makes a ZR-1 bearing look like it came off a Hot Wheels.
- Options for 5 on 4-3/4" or 4-1/2" bolt circles.
- Thicker, wider flange.
- Axles available in 31 or 35 splines.
- 35 spline axles also available gun drilled and crowned for cambered housings.
- Extremely Compact.
- Available with 14" or 15" rotors and Wilwood or Baer calipers.
- Internal parking brake option with scalloped drum.










Hope to see you all at SEMA!

[Jr]

When will the final pics be put up?

[Spiffav8]

Carl,

Thanks for taking the time to show me all the new product. Very impressive. I think it's going to be a big hit.

[Chassisworks]

Originally Posted by DJW32

When will the final pics be put up?

We took pictures before it left the factory. I think they're going up on our site next week. There are a couple pics on facebook that I've found. I'm positive it will show up in the picture threads here as well. Someone came by and took some video too. EDIT: It looks like it's the banner page on Chevy High Performance's FB page right now.

Originally Posted by Spiffav8

Carl,
Thanks for taking the time to show me all the new product. Very impressive. I think it's going to be a big hit.

Great to meet you too and thanks for the compliment. It has been hard to post only snippets up until now. There are still more pieces to come too. No one has had anything negative to say and it's been great to actually talk in depth with people about specific features.

Chris Sr is having fun showing his buddies his newest toys, like Bill Wood (Wilwood) and Art Morrison, while Steve and Scott, the guys who put it all together are getting some much deserved attention after way too much overtime.

[Chassisworks]

Well, SEMA has come and gone and we had the chance to talk with some great people. There were amazing cars everywhere I looked; the only bad thing was we were so busy I didn't get to walk around more than three hours all week. The response to our new parts was overwhelming and we are really excited to see what our customers will do with this system. Hopefully we will have a chance to sit down in the next couple weeks and go over some of the comments, suggestions, and general feedback that we received last week. Some people kept coming back again and again. If anyone was at SEMA and didn't get a chance to get their question answered, please feel free to post it here.

Okay, enough gushing about how much fun I had. The Sneak Peek Page has been updated with a bunch of new pictures and a couple new data sheets. For instance, there is now a lot more detail on the Chassisworks Floater housing ends.

Keep an eye on this thread, there are still more related components on the way.

For those who didn't get to go here's a couple big photos of the car before it got loaded on the truck to SEMA. No, the plate is not photoshopped.



~Carl

[Chassisworks]

Chad from Bangshift stopped by the booth and snapped some pics of our Camaro system. He caught me goofing off a bit and decided that the car and I make a good couple. Now if only I could convince the boss of that... Anyway, CLICK HERE for Bangshift images and info.

Here's a few more pics. These show the floor kit pieces, the Marquez headliner and how tight our Exact-Fit cage or roll bar fits. If you need bigger versions, they're on our page.

[MoparCar]

When will the pricing be finalized on all the items? Are the floaters and spindle/uprights in production or only development?