Has anyone ran there exhaust threw there quarters

[ledoux67]

Originally Posted by speedjohnston

I'm not sure how to do it, but a lot of pro-mod drag cars have fender exhaust, GT1 cars like the C6R have it to I believe... Maybe you can find some usefull info on one of those sites. I was going to check for you on a site called yellowbullet, but it seems to be down right now.

Thanks i will check it out

[ledoux67]

Originally Posted by elitecustombody

Got some sand in your vagina? You must be 70TWO NOVA's girlfriend,,

you want my contribution? There are plenty of cars with exhaust routed "threw" the quarters,anyone with average fabbing skills and common sense should be able to get that done,some cars have different suspension set-up and it may be difficult to route the exhaust ,so some of the actual body structural areas must be cut out and re-worked and reinforced around new exhaust, spend few hours checking out galleries at Ironworks,Bruning or Troy's sites,you'll get an idea what it takes, good luck

Dont get your panties in a uproar you old grumpy fart if all you want to do is throw words back and forth dont look at my threads, thanks for your contribution. And you can reply back i am sure you want the last words i will not ask for any more help if this is how you treat people starting out. I guess you were cutting up cars the day you were born. If you are just straight foward i am sorry but if you are a ass i am not.

[elitecustombody]

I believe my previous post had alot more info than the rest replies in this thread, if you consider 36 years old an old fart,then you're probably still in middle school ,I am a very straight forward and some people might think I'm an a**hole,it's just a first impression to some of the people who got pissed off at me because of the truth, word of advice, use as many search engines as you know of,but Google.com works pretty well last time I checked, if you ever need help,advice or just pics,it usually works every time . You are welcome.

[ledoux67]

Originally Posted by elitecustombody

I believe my previous post had alot more info than the rest replies in this thread, if you consider 36 years old an old fart,then you're probably still in middle school ,I am a very straight forward and some people might think I'm an a**hole,it's just a first impression to some of the people who got pissed off at me because of the truth, word of advice, use as many search engines as you know of,but Google.com works pretty well last time I checked, if you ever need help,advice or just pics,it usually works every time . You are welcome.

i have been out of middle school for about 28 years lol. I only asked after i had googled and looked threw every search possible in the teamcamaro forum and also in here. i could not find any write ups anywhere much less any pictures for ideas. and mostly i am not worried about my skill of doing it i was mainly worried about the paint peeling if the exhaust was ran "through" lol i spelled it correct did i not. And i did not know if people were using echo tips just ran "through" the panels and supported like it looks in the pictures i could find. I already had a plan on how to run them i was just asking if anyone else had done this before besides drag cars as asked in my first thread. And i am sorry if google did not work for me i thought this was a form of search engine as you say that is why i asked the question on here.

[speedjohnston]

This one really got off on the wrong foot, maybe we could just start over.

[jst8a5.0]

Here we go...

[ProTouring442]

Originally Posted by elitecustombody

"thru" is simplified and informal version of "through".But thanks for trying.Though English is my second language,it seize to amaze me how many people that were born and raised in US can't spell ,wonder how they graduated from school.

It may be a common use, but it is still incorrect.

Originally Posted by ledoux67

If that is what your trying to help me with i did not ask for a spelling teacher. Sorry if your so smart and my incorrect grammer bothers you and you have to try to put people down because you are so smart. If you would do this to every thread everyone would think your a *ick. Thanks for not contributing to the thread.

I do not believe anyone "put you down" for your incorrect spelling, and no one mentioned your grammar at all. On the other hand, proper spelling and grammar make a post easier to read and comprehend, and thus you will receive a more germane answer.

Originally Posted by ledoux67

i have been out of middle school for about 28 years lol. I only asked after i had googled and looked threw every search possible in the teamcamaro forum and also in here. i could not find any write ups anywhere much less any pictures for ideas. and mostly i am not worried about my skill of doing it i was mainly worried about the paint peeling if the exhaust was ran "through" lol i spelled it correct did i not. And i did not know if people were using echo tips just ran "through" the panels and supported like it looks in the pictures i could find. I already had a plan on how to run them i was just asking if anyone else had done this before besides drag cars as asked in my first thread. And i am sorry if google did not work for me i thought this was a form of search engine as you say that is why i asked the question on here.

Punctuation, capitalization, and breaking different thoughts into different paragraphs will all make your posts easier to read and comprehend.

As for the responses you have received, many were meant "tongue-in-cheek" so to speak. If you have taken offense, I apologize, we're all just having a bit of fun.

Originally Posted by speedjohnston

This one really got off on the wrong foot, maybe we could just start over.

I'm game! Beer at my house, come on over! Oh, but if you do, I may aslk for a bit of help carrying a few dozen boxes to the basement... but I am buying the beer!

Shiny Side Up!
Bill

[fatelvis]

have a 49 chevy truck/street rod that has had exhaust through/thru/throooo. the rear fenders for over 10 years, no burnt paint, only rubbed off from body flex... hey its a truck , what do you want?