Were can I find a tool to make - Lateral-g Forums

Mikael A · #1 03-10-2009, 12:11 PM

Were can I find a tool to make these holes.

**Swain** · #2 03-10-2009, 12:24 PM

Google Dimple Die Tool

deuce_454 · #3 03-10-2009, 12:44 PM

i have seen one made on a lathe... two turned pieces with a hole thru both for a long bolt, in one end of the two there was a male and female "punch" to cut/stamp the hole.. (and a valve spring in the female to pust out the stamped out piece) turn them both 180 deg and re-insert the bolt and they would fit together to form the edges of the hole.... could be worked with either a wrench or pneumatic/electric impact wherch....

google time found this:

http://www.mittlerbros.com/punch__flares.htm

tjbruning · #4 03-10-2009, 12:54 PM

www.trick-tools.com

Mikael A · #5 03-10-2009, 01:27 PM

Thanks,I have a press and a lathe so I will make my own.

bentfab · #6 03-10-2009, 08:22 PM

Mitler Brothers