Fixed the squeek from my front drive today. It was a combination of a bad bracket and a very dry belt.
She's running good now.
Also, found a radiator cap worthy of our cars.. nice but not all polished and flashy. It's from Billet Specialties and was about $20.
Someone asked me about my fire extinguisher mount. It's just plate alum I had cut to a template at my water jetter. I then drilled the holes, rounded the edges and scuffed it up with a scotchbrite pad. After that I attached the plate for the Safecraft extinguisher. Oh, the "tongue" is offset one inch and was bent down towards the floor just a bit. The extinguisher in this location doesn't interfear with the passenger at all.
Lastly, I had a request for a pic of how my proportioning valve is mounted. Here it is. it's hung off a bracket that is attached to the master and the clutch master hangs off it as well. Makes for one tidy package.
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
Linear Mode
