Camaro X LS7 install article back online

[XcYZ]

Mark gave me the go-ahead to put this article back online.

http://www.lateral-g.net/tech_articles/LS7_install


http://www.lateral-g.net/tech_articles/LS7_install/0001_small.jpg (http://www.lateral-g.net/tech_articles/LS7_install)

[Budweasel]

Scott, thank you for getting that back up. Those pictures are worth 1,000 words/answers.

Thanks again

Jason

[Steve Chryssos]

Cool. A customer of mine had numerous LS7 swap questions. I will forward the link to him.

[Bowtieracing]

Is that oil tank same as ATS sells? Or is it longer ? I am asking it because Mark has notched the fender for it.

[XcYZ]

ATS is a dealer for Peterson. You can get Peterson dry sump tanks in 6", 7", or 9" diameters. You don't have a lot of room to get an 8 quart tank wedged in there. I had to do quite a bit of cutting. You'll definitely need a body saw.

[Bowtieracing]

ATS is a dealer for Peterson. You can get Peterson dry sump tanks in 6", 7", or 9" diameters. You don't have a lot of room to get an 8 quart tank wedged in there. I had to do quite a bit of cutting. You'll definitely need a body saw.

Great! Because i want to drop it a little. It looks kind of cool when notched in to fender:cool:

[XcYZ]

It can't really be dropped a whole bunch or it will hit the lower valence/chin spoiler bracket. You also have to leave enough room to get the bumper bracket bolted on... and be very aware of where the tire is at full lock. :thumbsup:

[Bowtieracing]

It can't really be dropped a whole bunch or it will hit the lower valence/chin spoiler bracket. You also have to leave enough room to get the bumper bracket bolted on... and be very aware of where the tire is at full lock. :thumbsup:

Thanks Scott!:cheers: I take the lesson and try to fit everything first.

[XcYZ]

Glad it was useful info. :thumbsup: I pretty much have my tank in and ready to go. I'll have to post a few pics.