Lets see all the trucks

[syborg tt]

Nice seeing the mini-truck love.

[Bad94]

My new DD and tow rig.
http://s-seriesforum.com/albums/album522/9_5_027.sized.jpg


2009 2500HD 6.0L Z71, green keys, 20x10's 33x12.50x20

[mtlinvtns]

here's my daily driver, almost done. not the best picture.

[COYBILT]

I came up with the game plan


OK so here it is: L92 heads with comp springs, stock L92 truck manifold, Corvette filter for the return, Edelbrock 4 bolt 90mm throttle body (cable actuated) ,214/224 cam @.050 high 500 to low 600 lift on a 114-116 LSA, possible 6L80E trans swap , 2001 and up full floater 14 bolt with 11.5 ring gear, 2001 and up HD frame back half, and some comp lifters. I need to put more research into some parts but for the most part its factory GM parts. I am going to contact Truckin and see if they want to do a article on how to get 500+ hp out of your 99+ 6.0 vortec truck. I want to keep this truck looking stock for the most part. Since I last posted I put a ton of new parts on the truck, such as: steering wheel, rubber work mat (instead of my old carpet), new tail lights (OE), new power steering pump, hydro boost, master cylinder, steering shaft, denali Gauge cluster swap (which looks awsome),Vertical GM HD mirrors, new under hood light, new infinity speakers (stock head unit though), new tires, new coolant recovery tank, new heater core quick disconnects.

New Lq9 crate , stainless exhaust with V bands and Dynatech headers , new radiator, new hoses, new cooler lines, new motor mounts, re manufactured alternator, new steering box, new A arms ( cant get ball joints or bushings for this truck) new steering gear, rebuilt the Rear end with 4.11's/Eaton Posi, scored a set of aluminum HD wheels, new rotors and pads (Originals went 170k and still had some meat left) class 5 hitch, new 2200 stall, new O/2 sensors my own custom tune and thats about it, scored a used bed for 1k, all of this was done from April-June of 2008. I did all these improvements with some of the little spare time I had, mind you I was building the GTO at the same time.

The truck was a pest control truck my father used everyday until december of 2007, that's when I got it.

[nvr2fst]

Here's the Post #18 frame with the cab basecoated!

http://i56.photobucket.com/albums/g170/novanutcase/shoppics2-28-07009.jpg

John

Rodger, what ever became of the truck in the background. I didn't see it when I was down there. Is it finished? Pictures?

[burntnova]

So this is my other play toy
http://i669.photobucket.com/albums/vv60/denny_w121/new%20truck/IMG_3050.jpg

and my DD and Chirstmas gift from the wife
http://i669.photobucket.com/albums/vv60/denny_w121/new%20truck/truck2.jpg

[COYBILT]

A L92 manifold has just been purchased next is the heads

[bgray]

We Eat, Piss and Breath trucks in my family. Heres a few

My other Summer Toy. Bunch of Stuff, made 310rwhp on a mustang dyno
http://i92.photobucket.com/albums/l35/bgraysierra/Trucksh023.jpg
http://i92.photobucket.com/albums/l35/bgraysierra/Trucksh027.jpg
http://i92.photobucket.com/albums/l35/bgraysierra/Trucksh015.jpg
http://i92.photobucket.com/albums/l35/bgraysierra/Trucksh013.jpg
http://i92.photobucket.com/albums/l35/bgraysierra/th_CIMG3192.jpg (http://s92.photobucket.com/albums/l35/bgraysierra/?action=view&current=CIMG3192.flv)
http://i92.photobucket.com/albums/l35/bgraysierra/th_CIMG3189.jpg (http://s92.photobucket.com/albums/l35/bgraysierra/?action=view&current=CIMG3189.flv)

My Dads Old Daily. Supercharged - stolen
http://i92.photobucket.com/albums/l35/bgraysierra/trunkz033.jpg

My Daily
http://i92.photobucket.com/albums/l35/bgraysierra/lights010.jpg

Older Daily
http://i92.photobucket.com/albums/l35/bgraysierra/Other/Picture136.jpg

Older Daily
http://i92.photobucket.com/albums/l35/bgraysierra/Other/stuff003.jpg

63 Pickup
http://i92.photobucket.com/albums/l35/bgraysierra/Other/DSCF5113.jpg

[COYBILT]

LS3 heads were ordered today for the GMC, LS3 heads feature sodium filled valves and upgraded springs and are identical to L92 Heads otherwise. The list consist of L92 intake manifold, nick williams 92mm TB Ls3 heads and reusing my 214/218 cam, its a good all around truck cam.

I will see what this combo makes for power, I hope it is good.



I am saving my Old Lq9 heads for my Lq4 Shortblock. That Lq4 is going in a 65 Lemans convertible for my dad rebuilding it soon. Its the old motor out of my truck, were giving a second lease on life, as a fun motor and not a work horse.

Port the Lq9 heads and LS2 manifold, 92mm Nick Williams throttle body, 224/230 grind cam on a 114LSA, not sure what i am going to do with the bottom end.

[blue67ss]

http://i543.photobucket.com/albums/gg442/swade72/DCP_1045-1.jpg?t=1263855375


heres mine 1949 chevy shop truck

[70rs]

http://i543.photobucket.com/albums/gg442/swade72/DCP_1045-1.jpg?t=1263855375


heres mine 1949 chevy shop truck

That is a cool old truck. What all was done to it?

[Bad94]

Heres a customers truck we did/ in the finally stage.
http://s-seriesforum.com/albums/album308/1_6_011.sized.jpg
http://s-seriesforum.com/albums/album308/1_6_012.sized.jpg
http://s-seriesforum.com/albums/album308/1_7_009.sized.jpg
http://s-seriesforum.com/albums/album308/misc_pics1_002.sized.jpg

[blue67ss]

That is a cool old truck. What all was done to it?

Thanks.....It has been sub-framed from a '78 buick regal with the 10 bolt rear-end from the same donar car, front and rear sway bars, 5spd trans, 327 engine with double hump heads tilt column and buckets from a van. Not a show piece but really fun to drive..gets alot of attention.

[796spdbu]

Bad94,
wheres your shop?

[lower90xcab]

Bad94,
wheres your shop?

cincy.............get guys to work with...

[796spdbu]

Lower,I read that.Im from east of cincy..just havent heard of his shop..Thought itd be a cool place to go check out....

[Bad94]

cincy.............get guys to work with...

Thanks scott.


Lower,I read that.Im from east of cincy..just havent heard of his shop..Thought itd be a cool place to go check out....

We are in the Mt Healthy area.
Small shop, one project at a time.

[BlackenedRR]

My '95 GMC...
http://i438.photobucket.com/albums/qq110/BlackenedRR/DSC00245.jpg

[rat_rod_russell]

Here's my 57 Chevy with All C5 and C6 suspension, LQ4, T56 and Twin Turbos, if only I could keep the diff in one place. 625+ HP doesn't help, lol. It has an experimental diff adapter and mount so its to be expected. The rest is in my sig and a link to my build thread.

http://www.hotrodjim.com/immages/projects/in_progress/57_truck/photo_shoot/01/s-1.jpg (http://www.hotrodjim.com/immages/projects/in_progress/57_truck/photo_shoot/01/l-1.jpg) http://www.hotrodjim.com/immages/projects/in_progress/57_truck/photo_shoot/01/s-2.jpg (http://www.hotrodjim.com/immages/projects/in_progress/57_truck/photo_shoot/01/l-2.jpg) http://www.hotrodjim.com/immages/projects/in_progress/57_truck/photo_shoot/01/s-3.jpg (http://www.hotrodjim.com/immages/projects/in_progress/57_truck/photo_shoot/01/l-3.jpg) http://www.hotrodjim.com/immages/projects/in_progress/57_truck/photo_shoot/01/s-4.jpg (http://www.hotrodjim.com/immages/projects/in_progress/57_truck/photo_shoot/01/l-4.jpg)

The Chassis
http://www.hotrodjim.com/immages/projects/in_progress/57_truck/update/06/s-13.jpg (http://www.hotrodjim.com/immages/projects/in_progress/57_truck/update/06/l-13.jpg) http://www.hotrodjim.com/immages/projects/in_progress/57_truck/update/06/s-11.jpg (http://www.hotrodjim.com/immages/projects/in_progress/57_truck/update/06/l-11.jpg) http://www.hotrodjim.com/immages/projects/in_progress/57_truck/update/06/s-18.jpg (http://www.hotrodjim.com/immages/projects/in_progress/57_truck/update/06/l-18.jpg) http://www.hotrodjim.com/immages/projects/in_progress/57_truck/update/06/s-17.jpg (http://www.hotrodjim.com/immages/projects/in_progress/57_truck/update/06/l-17.jpg)

http://www.hotrodjim.com/immages/projects/in_progress/57_truck/update/06/s-9.jpg (http://www.hotrodjim.com/immages/projects/in_progress/57_truck/update/06/l-9.jpg) http://www.hotrodjim.com/immages/projects/in_progress/57_truck/update/06/s-5.jpg (http://www.hotrodjim.com/immages/projects/in_progress/57_truck/update/06/l-5.jpg) http://www.hotrodjim.com/immages/projects/in_progress/57_truck/update/06/s-7.jpg (http://www.hotrodjim.com/immages/projects/in_progress/57_truck/update/06/l-7.jpg) http://www.hotrodjim.com/immages/projects/in_progress/57_truck/update/06/s-1.jpg (http://www.hotrodjim.com/immages/projects/in_progress/57_truck/update/06/l-1.jpg)

http://www.hotrodjim.com/immages/projects/in_progress/57_truck/solid_drawings/s-36.jpg (http://www.hotrodjim.com/immages/projects/in_progress/57_truck/solid_drawings/l-36.jpg) http://www.hotrodjim.com/immages/projects/in_progress/57_truck/solid_drawings/s-35.jpg (http://www.hotrodjim.com/immages/projects/in_progress/57_truck/solid_drawings/l-35.jpg) http://www.hotrodjim.com/immages/projects/in_progress/57_truck/solid_drawings/s-34.jpg (http://www.hotrodjim.com/immages/projects/in_progress/57_truck/solid_drawings/l-34.jpg)

-Russell

[70TWO NOVA]

that thing is sick!!

[BlackenedRR]

HOLY HELL!!!!! Love the truck, Russell! I've been thinking about using those same wheels on my truck, they're NICE!

[WSSix]

I really like that truck Russel. Great job. I'm going to have to check out your website for more pictures when I get time.

[Tony_SS]

Here's my 57 Chevy with All C5 and C6 suspension, LQ4, T56 and Twin Turbos, if only I could keep the diff in one place. 625+ HP doesn't help, lol. It has an experimental diff adapter and mount so its to be expected. The rest is in my sig and a link to my build thread.

http://www.hotrodjim.com/immages/projects/in_progress/57_truck/photo_shoot/01/s-1.jpg (http://www.hotrodjim.com/immages/projects/in_progress/57_truck/photo_shoot/01/l-1.jpg) http://www.hotrodjim.com/immages/projects/in_progress/57_truck/photo_shoot/01/s-2.jpg (http://www.hotrodjim.com/immages/projects/in_progress/57_truck/photo_shoot/01/l-2.jpg) http://www.hotrodjim.com/immages/projects/in_progress/57_truck/photo_shoot/01/s-3.jpg (http://www.hotrodjim.com/immages/projects/in_progress/57_truck/photo_shoot/01/l-3.jpg) http://www.hotrodjim.com/immages/projects/in_progress/57_truck/photo_shoot/01/s-4.jpg (http://www.hotrodjim.com/immages/projects/in_progress/57_truck/photo_shoot/01/l-4.jpg)

The Chassis
http://www.hotrodjim.com/immages/projects/in_progress/57_truck/update/06/s-13.jpg (http://www.hotrodjim.com/immages/projects/in_progress/57_truck/update/06/l-13.jpg) http://www.hotrodjim.com/immages/projects/in_progress/57_truck/update/06/s-11.jpg (http://www.hotrodjim.com/immages/projects/in_progress/57_truck/update/06/l-11.jpg) http://www.hotrodjim.com/immages/projects/in_progress/57_truck/update/06/s-18.jpg (http://www.hotrodjim.com/immages/projects/in_progress/57_truck/update/06/l-18.jpg) http://www.hotrodjim.com/immages/projects/in_progress/57_truck/update/06/s-17.jpg (http://www.hotrodjim.com/immages/projects/in_progress/57_truck/update/06/l-17.jpg)

http://www.hotrodjim.com/immages/projects/in_progress/57_truck/update/06/s-9.jpg (http://www.hotrodjim.com/immages/projects/in_progress/57_truck/update/06/l-9.jpg) http://www.hotrodjim.com/immages/projects/in_progress/57_truck/update/06/s-5.jpg (http://www.hotrodjim.com/immages/projects/in_progress/57_truck/update/06/l-5.jpg) http://www.hotrodjim.com/immages/projects/in_progress/57_truck/update/06/s-7.jpg (http://www.hotrodjim.com/immages/projects/in_progress/57_truck/update/06/l-7.jpg) http://www.hotrodjim.com/immages/projects/in_progress/57_truck/update/06/s-1.jpg (http://www.hotrodjim.com/immages/projects/in_progress/57_truck/update/06/l-1.jpg)

http://www.hotrodjim.com/immages/projects/in_progress/57_truck/solid_drawings/s-36.jpg (http://www.hotrodjim.com/immages/projects/in_progress/57_truck/solid_drawings/l-36.jpg) http://www.hotrodjim.com/immages/projects/in_progress/57_truck/solid_drawings/s-35.jpg (http://www.hotrodjim.com/immages/projects/in_progress/57_truck/solid_drawings/l-35.jpg) http://www.hotrodjim.com/immages/projects/in_progress/57_truck/solid_drawings/s-34.jpg (http://www.hotrodjim.com/immages/projects/in_progress/57_truck/solid_drawings/l-34.jpg)

-Russell

Who did those HDR images for you?? They look awesome!

[jy211]

here's my old 94' Silverado, back when 17" were cosidered big :rofl:

[rat_rod_russell]

Who did those HDR images for you?? They look awesome!

Thanks, I did. I got my timing prefect, a rain storm was just blowing in so I had the nice shadows i the background but I still had plenty of light right over the top of me that's why all the little dew and water showed up so well. Of course I was packing up in the rain trying to drive a 600+ HP truck home on fun wet roads :unibrow: it was fun.

-Russell

[71RS/SS396]

Here's some pics of a 50 chevy project I've working on for over 3 years;

http://i1009.photobucket.com/albums/af219/tmackg71/1950%20pick-up/1950-36.jpg

http://i1009.photobucket.com/albums/af219/tmackg71/1950%20pick-up/1950-18.jpg

http://i1009.photobucket.com/albums/af219/tmackg71/1950%20pick-up/1950-9.jpg

http://i1009.photobucket.com/albums/af219/tmackg71/1950%20pick-up/1950-19.jpg

[BlackenedRR]

^Whatcha hiding under that blanket?:unibrow:

[elitecustombody]

http://i274.photobucket.com/albums/jj260/elitecustombody/EscaladeG35086.jpg
http://i274.photobucket.com/albums/jj260/elitecustombody/EscaladeG35084.jpg
http://i274.photobucket.com/albums/jj260/elitecustombody/EscaladeG35081.jpg
http://i274.photobucket.com/albums/jj260/elitecustombody/EscaladeG35078.jpg
http://i274.photobucket.com/albums/jj260/elitecustombody/EscaladeG35047.jpg
http://i274.photobucket.com/albums/jj260/elitecustombody/EscaladeG35072.jpg
http://i274.photobucket.com/albums/jj260/elitecustombody/EscaladeG35063.jpg
http://i274.photobucket.com/albums/jj260/elitecustombody/EscaladeG35040.jpg
http://i274.photobucket.com/albums/jj260/elitecustombody/EscaladeG35072-1.jpg
http://i274.photobucket.com/albums/jj260/elitecustombody/EscaladeG35073.jpg
http://i274.photobucket.com/albums/jj260/elitecustombody/EscaladeG35075.jpg
http://i274.photobucket.com/albums/jj260/elitecustombody/EscaladeG35089.jpg

black one from couple years back

http://img.photobucket.com/albums/v722/exvelocity/DSC00394-1.jpg
http://img.photobucket.com/albums/v722/exvelocity/DSC00393.jpg

[montanass]

my current DD-06 Duramax LT

http://i892.photobucket.com/albums/ac121/cdoubleu_photos/Misc/DMAX.jpg

my el camino with my old truck (03 Silverado SS before TBSS)

http://i892.photobucket.com/albums/ac121/cdoubleu_photos/meano/n1623415967_130499_2535.jpg

my TBSS (sold to buy duramax)

http://i892.photobucket.com/albums/ac121/cdoubleu_photos/meano/l_58e877b4448de017339cdc3ea974e303.jpg

and my 84 K5 Blazer (this years summertime driver.... maybe)

http://i892.photobucket.com/albums/ac121/cdoubleu_photos/SU1HMDAxMTMuanBn.jpg

[v8s10kid]

new guy here, figured id post some pics.
http://i124.photobucket.com/albums/p28/LIRicer/102_0251-1.jpg
http://i124.photobucket.com/albums/p28/LIRicer/102_0341-1.jpg
http://i124.photobucket.com/albums/p28/LIRicer/102_0265-1.jpg
http://i124.photobucket.com/albums/p28/LIRicer/transperenthood-1.png
http://i124.photobucket.com/albums/p28/LIRicer/102_0069-1.jpg

[417 Motorsports]

heres my jenny, got an 02' 5.3 and 4l60e, shes just the shop truck parts getter :D

http://i297.photobucket.com/albums/mm232/417Motorsports/truckstreet.jpg
http://i297.photobucket.com/albums/mm232/417Motorsports/trukside.jpg
http://i297.photobucket.com/albums/mm232/417Motorsports/shop%20truck/IMG00486-20100428-0851.jpg
http://i297.photobucket.com/albums/mm232/417Motorsports/shop%20truck/IMG00548-20100521-1906.jpg

[xpsled]

In Aus we call them utes but I guess you could call it a truck!!!
6.0l 425hp 6 speed
http://i874.photobucket.com/albums/ab309/xpsled/IMGP3833.jpg
http://i874.photobucket.com/albums/ab309/xpsled/IMGP3849.jpg
http://i874.photobucket.com/albums/ab309/xpsled/IMGP3831.jpg

[tobenk]

Man i bet thats fun to drive. love it. :thumbsup:

[Jr]

heres my jenny, got an 02' 5.3 and 4l60e, shes just the shop truck parts getter :D

http://i297.photobucket.com/albums/mm232/417Motorsports/truckstreet.jpg
http://i297.photobucket.com/albums/mm232/417Motorsports/trukside.jpg
http://i297.photobucket.com/albums/mm232/417Motorsports/shop%20truck/IMG00486-20100428-0851.jpg


What kind of rims do you have on this beauty?

[boonedog]

looks like coys wheels to me...

[Diognes56]

Recently bought a truck :D . Has already been very handy, though not in the ways that I had expected so far :rolleyes: .

It is a 2000 Silverado. 5.3L/4L60E with the 3.42 G80 locking differential. It keeps eyeing the 6.0L LQ4 that I have for the '56 though :_paranoid .

Before I bought it.
http://www.fquick.com/images/vehicles/full/32740313926.jpg (http://www.fquick.com/garages/viewgallery.php?action=viewimg&id=313926)

Current.
http://www.fquick.com/images/vehicles/full/32740319698.jpg (http://www.fquick.com/garages/viewgallery.php?action=viewimg&id=319698)

Some of my buddies like to give me a hard time saying that a 2WD RCSB doesn't qualify as a truck, but nobody can say that I don't use it like a truck. In front is the eight stumps pulled from our yard, and the shovel in the back is for unloading one of the five tons of dirt we have gotten with it.
http://www.fquick.com/images/vehicles/full/32740324005.jpg (http://www.fquick.com/garages/viewgallery.php?action=viewimg&id=324005)

David

[N2TRUX]

What kind of rims do you have on this beauty?Those look like MB Motoring "Old School" wheels. They are sold through Discount Tire-

http://www.discounttire.com/product/wheels/mbmos.glm.ang.jpg

[N2TRUX]

It looks like I have never posted any pics of my square body. Here's a few of my 77 Cheyenne. More here- LINK
(http://67-72chevytrucks.com/gallery/showgallery.php?cat=926&ppuser=)
http://67-72chevytrucks.com/gallery/data/926/thumbs/down.JPG (http://67-72chevytrucks.com/gallery/showphoto.php?photo=16517)http://67-72chevytrucks.com/gallery/data/926/thumbs/P53000231.JPG (http://67-72chevytrucks.com/gallery/showphoto.php?photo=16526)http://67-72chevytrucks.com/gallery/data/926/thumbs/100_0383.JPG (http://67-72chevytrucks.com/gallery/showphoto.php?photo=16807)http://67-72chevytrucks.com/gallery/data/926/thumbs/PC140213.JPG (http://67-72chevytrucks.com/gallery/showphoto.php?photo=16805)

[cp87]

Before

http://i7.photobucket.com/albums/y296/cp87/DSC02144.jpg


After


http://i7.photobucket.com/albums/y296/cp87/DSC02270.jpg

[TexasHM]

Here's mine as of this last weekend...

[XTRMEASURES]

These are my two buckets

08 GMC Crewcab and a 92 Isuzu pup

http://i39.photobucket.com/albums/e167/XTRMEASURES/DSC01653.jpg

http://i39.photobucket.com/albums/e167/XTRMEASURES/DSC01652.jpg

http://i39.photobucket.com/albums/e167/XTRMEASURES/DSC01649.jpg

http://i39.photobucket.com/albums/e167/XTRMEASURES/GMC2008007.jpg

[BlackenedRR]

The new daily driver...
http://i438.photobucket.com/albums/qq110/BlackenedRR/IMG_0929.jpg

[N2TRUX]

Nice truck. Is that a factory SWBCC or a Centurion conversion? I had a 96 conversion and loved it.

[PASD U]

http://i39.photobucket.com/albums/e167/XTRMEASURES/GMC2008007.jpg

That looks like a truck I see around these parts.


The new daily driver...
http://i438.photobucket.com/albums/qq110/BlackenedRR/IMG_0929.jpg

"Let's" tweak that sucker! I see some potentioal badassness in it's future!! :thumbsup:

[BlackenedRR]

Nice truck. Is that a factory SWBCC or a Centurion conversion? I had a 96 conversion and loved it.It's a Centurion. I've wanted one since they started making them, this is the first one that I've found that wasn't beat all to hell and priced like it was made of gold.


[COLOR="Blue"]"Let's" tweak that sucker! I see some potentioal badassness in it's future!! :thumbsup:
I'm already thinking about 22" front and 24" rear billets, airbags, Caddy clip and a plush interior for cruising in comfort...

[N2TRUX]

Here's my 97 Centurion conversion. It looked just like your when I bought it. Keep in mind the graphics were done in the 90's...;)

[dadto2jays]

Here is mine a 71c10 that I completely rebuilt in 2008

http://i289.photobucket.com/albums/ll233/big_al_24x2/c10/IMG004481-1.jpg

http://i289.photobucket.com/albums/ll233/big_al_24x2/c10/FR2.jpg

http://i289.photobucket.com/albums/ll233/big_al_24x2/c10/dynomat.jpg

http://i289.photobucket.com/albums/ll233/big_al_24x2/c10/engine0417.jpg

http://i289.photobucket.com/albums/ll233/big_al_24x2/c10/93933195-1.jpg

http://i289.photobucket.com/albums/ll233/big_al_24x2/c10/IMG00241-20090822-1233.jpg

[BlackenedRR]

Here's my 97 Centurion conversion. It looked just like your when I bought it. Keep in mind the graphics were done in the 90's...;)NICE!!! The only thing I wish mine had is leather buckets. I've got 60/40 cloth benches front and rear, but I'll swap it to buckets as soon as I can find some decent ones.

Here is mine a 71c10 that I completely rebuilt in 2008


Lookin' great!!!!

[N2TRUX]

NICE!!! The only thing I wish mine had is leather buckets. I've got 60/40 cloth benches front and rear, but I'll swap it to buckets as soon as I can find some decent ones.!Look for a Burb or Denali to rob the leather from. You will love the additional padding that the OEM leather seats have.

[N2TRUX]

Here is mine a 71c10 that I completely rebuilt in 2008Looking good Al....:thumbsup:

[PASD U]

I'm already thinking about 22" front and 24" rear billets, airbags, Caddy clip and a plush interior for cruising in comfort...

24's might be a bit large for an OBS. I think 20's or 22's max. What about some 22" Budnik Arrowheads? :unibrow:

[PASD U]

Uggghhh, took me all morning to remember and FIND where I saw this...here's a couple renderings for you. Check out post #46.:thumbsup:

[BlackenedRR]

Look for a Burb or Denali to rob the leather from. You will love the additional padding that the OEM leather seats have.Yeah, that's what I loved about my '96 GMC Z71, the seats were COMFY. If I can't find any either locally or in So Cal, I might get some cloth buckets and take them somewhere for custom leather and more padding.

24's might be a bit large for an OBS. I think 20's or 22's max. What about some 22" Budnik Arrowheads? :unibrow: I think 24's out back look sweet, but I know I'd have to cut like crazy to stuff 'em up front. I figure a nice 24/22 setup will be perfect, plus I want to give it a little hotrod rake and still have the wheels sorta tucked in the back. Who knows, it looks right in my mind, I'll have to get some renderings made to really feel it out.

[BlackenedRR]

Uggghhh, took me all morning to remember and FIND where I saw this...here's a couple renderings for you. Check out post #46.:thumbsup:
Link?:_paranoid

[PASD U]

Crap...I'm a stupid. Hahaha


Here ya go. http://67-72chevytrucks.com/vboard/showthread.php?t=375782&page=2

Sweet wheels on post #43 Sorry for cluttering the thread. Would've just posted the pictures here for everyone to see but was rushing.

[BlackenedRR]

Here ya go...
http://i438.photobucket.com/albums/qq110/BlackenedRR/BlackCCSBRendering.jpg
http://i438.photobucket.com/albums/qq110/BlackenedRR/RedCCSBRendering.jpg

[PASD U]

Yep, that's what I was talking about. Thanks for putting the work in. By the way, I suppose it needs to be said...

ahem, (in best fast-talking-low-speaking lawyer voice) The renderings seen above are neither the work nor the property of myself nor do I have any affiliation with the artist/owner/recipient/ of these renderings other than being a member of the same public forum. (whew! breath full)

I like the clean look of those trucks though whether crew cab, regular or extended cab.

[Jr]

Where did you find that truck? I would love to one of those...

The new daily driver...
http://i438.photobucket.com/albums/qq110/BlackenedRR/IMG_0929.jpg

[BlackenedRR]

Where did you find that truck? I would love to one of those...Found it on another forum, made an 1,100 mile round-trip to go get it in New Mexico.

[PASD U]

"Mama said, 'nuthin wurth havin eva came EZ!'" :P

[BlackenedRR]

"Mama said, 'nuthin wurth havin eva came EZ!'" :P I'm tellin' you, that was one of the worst road trips I've ever made!! But, I got a sweet truck out of it!

[dnd1978]

here's mine

[N2TRUX]

Thats a nice one. Got any more pics?

[ccracin]

Thats a nice one. Got any more pics?

x2 :thumbsup:

[Jr]

Thats a nice one. Got any more pics?

x3

With details.

[dnd1978]

Thanks guys.

This winter its getting some upgrades, Weiand 142 blower, rear locker, rear disk brakes, hydro boost, falsing the bed floor 3'', tubs, rear wheel widened from 20x8s'' to 20x11s'' and fresh paint (same color).

http://www.youtube.com/watch?v=A9oEH_Bjo_k

[Jr]

Thanks guys.

This winter its getting some upgrades, Weiand 142 blower, rear locker, rear disk brakes, hydro boost, falsing the bed floor 3'', tubs, rear wheel widened from 20x8s'' to 20x11s'' and fresh paint (same color).

http://www.youtube.com/watch?v=A9oEH_Bjo_k

The truck looks great!

What kind of rims and suspension? Also, did you make brackets for that seat?

[4OfaKind]

Here is my DD I just bought a month ago. I call her "Ruby" :cool: Sorting out all the minor maintenance issues before I make her purty.

Mal

[tones2SS]

here's mine

Nice looking truck!:thumbsup:

[texas56]

here's mine



Sharp lookin Truck!:thumbsup:

[Wybrow]

Here is mine :lol:

http://i83.photobucket.com/albums/j295/98crvee/ext%20cab/IMG_0859.jpg

[N2TRUX]

Its got a few pieces missing, but still looks like a good solid truck...er....start.

[dropped72ss]

My truckhttp://i1044.photobucket.com/albums/b445/dropped72ss/IMG_0223.jpg

[Dr G]

Hello,

This is my first post here. Not sure if my truck fits this thread. It's not a tow vehicle or parts hauler for a shop. But it is sort of a ProTouring Shop Truck for lack of a better description. If anyone has a better name for it I am all ears.

http://gustave.smugmug.com/Trucks/56-F-100/DG-F100-1/1235269494_4wtTL-XL.jpg

Although it is far from finished, here is the description so far:

Reinforced frame with truck arms and custom front IFS w/ cross-over bar
Fronts shocks = 20”QA1 6773
Rear shocks = Bilstein
Springs = 300lbs/in front, 200lbs/in rear
Brakes = Wilwood, 14” rotors up front w/ 6 piston SLR6 calipers, Wilwood under-hung pedal cluster with two Tilton master cylinders and balance bar
Engine = Ford Racing S347JR (350hp, 400ftlbs)
Transmission = reworked C4
Rear End = Ford 12” with Speedway Engineering lightweight housing and Truetrac limited slip
Front axles moved forward 4 inches with reworked fender openings
Rear fenders widened by 1.5 inches
Wheels = Wheelsmith Aluminum Smoothies. 17”x8” front (20.5lbs), and 17”x9.5” rear (21.5lbs)
Tires = Diamond Back Whitewalls = 255/60-17 front and 275/60-17 rear
Steering = Flaming River quick ratio power rack with KRC PS pump and remote reservoir

During the initial build I put a premium on keeping the truck as light as possible, with a wide torque curve. Making it easy to drive on the street and good for auto-x. Moving the front axles forward, and moving the engine back by massaging the firewall helped with weight distribution. The #1 cylinder is behind the front axle centerline.

I have additional things planned like aluminum bumpers and lightweight aluminum bucket seats. The interior will be aircraft inspired (WWII era).

http://gustave.smugmug.com/Trucks/56-F-100/S347JR-installed/1151913670_FKooc-L.jpg

http://gustave.smugmug.com/Trucks/56-F-100/front-suspension/1234190748_LgoXM-L.jpg

http://gustave.smugmug.com/Trucks/56-F-100/rear-frame-area-43/1235266995_DH9qq-XL.jpg

I waffled for a long time about going with traditional looking wheels vs. more modern wheels with lower profile tires. For now I decided to keep the whitewall look while adding as much performance as possible.

More to come as things progress.

Gustave

[PASD U]

I don't know what others may have or might call it, but I'm thinking it's One Fly Ass F100...no pun intended on the WWII aircraft theme.

I would love to do a vintage military-inspired truck myself.

[dadto2jays]

I dont remember if I have posted mine in here but here are some picts of it to share. My goal was a semi stock looking truck with serious power under the hood...

http://i289.photobucket.com/albums/ll233/big_al_24x2/de4aa64f.jpg

http://i289.photobucket.com/albums/ll233/big_al_24x2/dec7570a.jpg

http://i289.photobucket.com/albums/ll233/big_al_24x2/c10/carshowtrip010.jpg

[56pickup]

I love your truck! i love 56 f100's :thumbsup:

can you please pm me some more details on your suspension setup?

;)


Hello,

This is my first post here. Not sure if my truck fits this thread. It's not a tow vehicle or parts hauler for a shop. But it is sort of a ProTouring Shop Truck for lack of a better description. If anyone has a better name for it I am all ears.

http://gustave.smugmug.com/Trucks/56-F-100/DG-F100-1/1235269494_4wtTL-XL.jpg

Although it is far from finished, here is the description so far:

Reinforced frame with truck arms and custom front IFS w/ cross-over bar
Fronts shocks = 20”QA1 6773
Rear shocks = Bilstein
Springs = 300lbs/in front, 200lbs/in rear
Brakes = Wilwood, 14” rotors up front w/ 6 piston SLR6 calipers, Wilwood under-hung pedal cluster with two Tilton master cylinders and balance bar
Engine = Ford Racing S347JR (350hp, 400ftlbs)
Transmission = reworked C4
Rear End = Ford 12” with Speedway Engineering lightweight housing and Truetrac limited slip
Front axles moved forward 4 inches with reworked fender openings
Rear fenders widened by 1.5 inches
Wheels = Wheelsmith Aluminum Smoothies. 17”x8” front (20.5lbs), and 17”x9.5” rear (21.5lbs)
Tires = Diamond Back Whitewalls = 255/60-17 front and 275/60-17 rear
Steering = Flaming River quick ratio power rack with KRC PS pump and remote reservoir

During the initial build I put a premium on keeping the truck as light as possible, with a wide torque curve. Making it easy to drive on the street and good for auto-x. Moving the front axles forward, and moving the engine back by massaging the firewall helped with weight distribution. The #1 cylinder is behind the front axle centerline.

I have additional things planned like aluminum bumpers and lightweight aluminum bucket seats. The interior will be aircraft inspired (WWII era).

http://gustave.smugmug.com/Trucks/56-F-100/S347JR-installed/1151913670_FKooc-L.jpg

http://gustave.smugmug.com/Trucks/56-F-100/front-suspension/1234190748_LgoXM-L.jpg

http://gustave.smugmug.com/Trucks/56-F-100/rear-frame-area-43/1235266995_DH9qq-XL.jpg

I waffled for a long time about going with traditional looking wheels vs. more modern wheels with lower profile tires. For now I decided to keep the whitewall look while adding as much performance as possible.

More to come as things progress.

Gustave

[Tricky]

This is what I go racing with.

30971

30972

[PASD U]

Nice. :thumbsup:

[Tricky]

Here's what I take around the track!

[N2TRUX]

Good looking truck. I have always liked the red Sports.

[Jgpclone]

heres my 2004 with new wheels

[jhiphopjunky]

Any info on how this truck was lowered? Coils or Air?
Not mine but I wish it were...
http://i24.photobucket.com/albums/c49/kmcanally/GoodGuysColumbus2007Sunday186.jpg

[brownz]

Any info on how this truck was lowered? Coils or Air?

one of my all time favs

[dwilson]

here is my 03 dodge, got 115k miles on it now. i enjoy it.

http://i250.photobucket.com/albums/gg267/devwil68/DSCN3612.jpg
http://i250.photobucket.com/albums/gg267/devwil68/DSCN3620.jpg

[Hotrod1]

Here is the beginning or middle of our 56 chevy truck.

[street3285]

Any info on how this truck was lowered? Coils or Air?

From the looks of it, I think it is on air..... probably using a stock crossmember up front.

[syborg tt]

Here is the beginning or middle of our 56 chevy truck.

Looks like we need more pictures and maybe an introduction.

- Looks Awesome !!

[MattO]

This is what I'm working on currently. Working with some great companies and individuals to make it something truly unique.

Enjoy

http://www.youtube.com/watch?v=54Yl6GSZEnA

http://img.photobucket.com/albums/v608/ace95835/quickshift-sml.jpg

http://img.photobucket.com/albums/v608/ace95835/IMG951562.jpg

http://img.photobucket.com/albums/v608/ace95835/IMG953020.jpg

http://img.photobucket.com/albums/v608/ace95835/CIMG0670.jpg

http://www.youtube.com/watch?v=CkA30HTBFQo

[pro71bird]

Here's one of mine.

2002 F150 Lightning
Hotchkis, Bilstein, QA1, Corner Grip, Ground Force, Baer, etc.....
.
.
http://i39.tinypic.com/2dshfmw.jpg

[XTRMEASURES]

This is my 2013 GMC

http://i1280.photobucket.com/albums/a494/BUFFORD72/image_zps2450696d.jpg (http://s1280.photobucket.com/user/BUFFORD72/media/image_zps2450696d.jpg.html)

[JasonElvisHeard]

little personal project Im working on.... luxury prerunner chevy silverado.

https://scontent-a-lax.xx.fbcdn.net/hphotos-ash3/549043_10201424316763826_2115912192_n.jpg

https://scontent-b-lax.xx.fbcdn.net/hphotos-prn2/1238722_10201424315523795_738585358_n.jpg

https://scontent-a-lax.xx.fbcdn.net/hphotos-ash3/575249_10201424316643823_1260132472_n.jpg

https://scontent-a-lax.xx.fbcdn.net/hphotos-frc1/526912_10201424315883804_358711833_n.jpg

https://sphotos-a-sjc.xx.fbcdn.net/hphotos-ash4/1001261_10201356637551888_1301952843_n.jpg

https://sphotos-a-sjc.xx.fbcdn.net/hphotos-frc3/1240665_10201356637511887_1260263345_n.jpg

[WSSix]

That's badass! Amazing fabrication. Is it going to be mid engine or is the engine just set way back into the cab?

[JasonElvisHeard]

Thanks man, Front Engine, Twin turbo 454 Dart Block.

https://scontent-b-lax.xx.fbcdn.net/hphotos-ash4/1374896_10201611996215695_1916834218_n.jpg

https://scontent-b-lax.xx.fbcdn.net/hphotos-prn2/1384141_10201611994655656_57244293_n.jpg

Jason

[okyankee]

my two toys. got the 67 from a guy that works by me and I bought the dually from a guy who lives in Maryland.

http://i34.photobucket.com/albums/d123/okyankee/gygfh_zps2a70baf4.jpg
http://i34.photobucket.com/albums/d123/okyankee/541_zps87d81730.png

[SWAPMEETCRAZY]

Rolled out yesterday to clean shop..68....W/ALOT of Porterbuilt Products...just finished up raised bed brackets and rails

[JasonElvisHeard]

https://scontent-b-lax.xx.fbcdn.net/hphotos-prn2/988735_10201683481762789_1135324884_n.jpg

jason

[N2TRUX]

Wow thats a bad @ss truck. I see some amazing fab skills at work there. Keep the pics coming.

[custom 68]

Wow I would say mad fab skills, that thing will be stiff.

[custom 68]

Here is mine.

[1badsc]

just went thru 30 some pages Wow some very cool trucks in here This is my 92 Chevy was a sport editionTruck has 60000 miles been on 2 Power tours going on next years power tour with the Truck here is the truck when I bought it ... and before the paint jobhttp://i77.photobucket.com/albums/j77/Koolmagumn/Misc%20stuff/1992%20Chevy%20pickup/4676415880996.jpghttp://i77.photobucket.com/albums/j77/Koolmagumn/Misc%20stuff/1992%20Chevy%20pickup/9007310261109.jpghttp://i77.photobucket.com/albums/j77/Koolmagumn/wis%20dells%202011/Picture103.jpghttp://i77.photobucket.com/albums/j77/Koolmagumn/2011%20hotrod%20power%20tour/P6020169.jpg

[WSSix]

that's a good classic look :thumbsup:

[JasonElvisHeard]

the back-half of the pre-runner is back from laser. 100% cnc laser notched tube and cnc cut/bent plate-work for the bump stops and spare mounts. 92 gal fuel cell mounts from underneath and above holds 2 39" spare tires.


https://scontent-b-lax.xx.fbcdn.net/hphotos-ash4/1452253_10201878081627664_1570443664_n.jpg

https://scontent-b-lax.xx.fbcdn.net/hphotos-prn2/1476197_10201878082107676_515485049_n.jpg


Jason

[aggie91]

Jason - looks like you got a bunch of weld time waiting on you....Fab work is looking killer!

[JasonElvisHeard]

https://scontent-a-sjc.xx.fbcdn.net/hphotos-frc1/1486903_10202181588375143_503596227_n.jpg


https://scontent-b-sjc.xx.fbcdn.net/hphotos-ash3/1521625_10202181587575123_2106583401_n.jpg

https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-prn2/1546203_10202181588055135_536272062_n.jpg

[nitrofish94zed]

My 48 Ford F1 project truck. Started out as yard art for my wife's photography business, fell in love with it and just couldn't let it sit. Using an 03 Crown Vic drivetrain/suspension.

[WSSix]

Welcome to the site. That sounds like a great build. Be sure to post up pictures as you build the truck. We love pictures.

[intocarss]

Here's mine

[Mikael A]

Kinda like this thread so bringing it back....this is my tow pig.

[slck6t9]

Here's mine that getting ready for paint.

[WSSix]

Looks good, Scott. I've got a friend with a 55 that he's putting on a No Limits frame. Good luck with your build!

[slck6t9]

A little update...

[WILWAXU]

This followed me home over the weekend. :lostmarbles:

[shelteredV]

A few of the current ones

[DBasher]

Not really a truck or pro touring but it’s a hoot.

[Flash68]

^^ That thing is awesome. So much fun to be had.

And I love the square body a post above that.

Good stuff.

[NAPA 68]

Here is my contribution........................

95 F250 7.3 5 speed. It does a great job of hauling firewood and beer.

http://i1043.photobucket.com/albums/b437/napa68/017_zpseunnknpc.jpg (http://s1043.photobucket.com/user/napa68/media/017_zpseunnknpc.jpg.html)

[fleet]

Here is my contribution........................

95 F250 7.3 5 speed. It does a great job of hauling firewood and beer.

http://i1043.photobucket.com/albums/b437/napa68/017_zpseunnknpc.jpg (http://s1043.photobucket.com/user/napa68/media/017_zpseunnknpc.jpg.html)

Looks very clean. :thumbsup:

[79 Camaro]

Almost done.

[Panteracer]

My budget beater truck
Finally shortened and lowered
Need to finish up the brakes, fuel system,
clutch and exhaust

Bob

[Flash68]

Cool truck Bob.

[Panteracer]

Can't wait until I get it done
It will be fun... not a race car
for once

Bob

[Tincup]

Can't get the picture right side up.....

But the build is getting there....

66953

66952

[Panteracer]

Very cool.. are you going to keep the Patina?
What engine is that?

Bob

[Tincup]

Very cool.. are you going to keep the Patina?
What engine is that?

Bob

Yep, Keeping the patina on the outside. The motor is a Gen 3 Viper V10....

[Flash68]

The Viper Truck is killer too!

[Panteracer]

Your engine looked different
Viper power will be fun
Glad you are keeping the Patina
Keep us updated

Bob

[Hugger67RSSS]

Funny how this truck is as much fun as any car I’ve ever had

[Slick68]

Am I too late to join this party?

https://i.hmjimg.com/images/2018/09/21/untitled-September-08-2018-4517-ZF-9191-01416-1-001-027.md.jpg (https://www.hostmyjunk.com/image/NDZ7o)
https://i.hmjimg.com/images/2018/09/21/untitled-September-08-2018-4491-ZF-9191-01416-1-001-001.md.jpg (https://www.hostmyjunk.com/image/N9een)
https://i.hmjimg.com/images/2018/09/21/untitled-September-08-2018-4495-ZF-9191-01416-1-001-005.md.jpg (https://www.hostmyjunk.com/image/N94gc)
https://i.hmjimg.com/images/2018/09/21/untitled-September-08-2018-4499-ZF-9191-01416-1-001-009.md.jpg (https://www.hostmyjunk.com/image/N9Pat)

[WILWAXU]

Here's updated pictures of my truck

- Ridetech StreetGRIP system
- American Racing Torq Thrust II (20x8 & 20x10)
- Mini restoration on the interior

[glassman]

Can't get the picture right side up.....

But the build is getting there....

66953

66952

Unusual and cool!!

Love these truck threads.

[glassman]

Am I too late to join this party?



Never. Super nice truck. Surprised i haven't seen it before, its been to alot of the events i watch/attend

[glassman]

Here's updated pictures of my truck

- Ridetech StreetGRIP system
- American Racing Torq Thrust II (20x8 & 20x10)
- Mini restoration on the interior

John, what year is that?

[cla5675]

My 63 C10 LS/4L60E build. Hope to have it on the road next summer.

[TRILOGY]

72 c10
Roadster Shop Fast Track chassis
LS376/525 with 4L70E

[Slick68]

Never. Super nice truck. Surprised i haven't seen it before, its been to alot of the events i watch/attend

Yeah, I've been to LS Fest in 2017 and 2018 and several NSRA and Bill Howell events. I also made it to Columbus Goodguys for the first time this past July.

[WILWAXU]

john, what year is that?

1990

[jmking9]

Here's mine

[WSSix]

I'm loving all these trucks! Thanks for sharing everyone.

[rat_rod_russell]

So many pretty truck! I should play too since trucks seem to be the bulk of my life these days.


George's truck I'm wrapping up. We've been playing with some random goodies on it and just doing shake down miles for the customer.

https://lateral-g.net/forums/showthread.php?t=41938

https://gallery.nerdrods.com/Customers/CP5559C4/0001%20-%20George%20W/07/thumbnails/20170513-_H6A1044.jpg (https://gallery.nerdrods.com/Customers/CP5559C4/0001%20-%20George%20W/07/photos/20170513-_H6A1044.jpg) https://gallery.nerdrods.com/Customers/CP5559C4/0001%20-%20George%20W/07/thumbnails/20170513-_H6A1029.jpg (https://gallery.nerdrods.com/Customers/CP5559C4/0001%20-%20George%20W/07/photos/20170513-_H6A1029.jpg) https://gallery.nerdrods.com/custom_project_cp5559c4_george_s_1956_chevy_05/thumbnails/L-14.jpg (https://gallery.nerdrods.com/custom_project_cp5559c4_george_s_1956_chevy_05/photos/L-14.jpg)




And my fathers truck I hope to be driving and racing this year. Its his 70th birthday present built from stuff we've just had lying around the shop.

https://lateral-g.net/forums/showthread.php?t=50400

https://gallery.nerdrods.com/Projects/03_D3/08/thumbnails/20181111-_H6A2058.jpg (https://gallery.nerdrods.com/Projects/03_D3/08/photos/20181111-_H6A2058.jpg) https://gallery.nerdrods.com/Projects/03_D3/05/thumbnails/021.jpg (https://gallery.nerdrods.com/Projects/03_D3/05/photos/021.jpg) https://gallery.nerdrods.com/Projects/03_D3/07/thumbnails/20161209-_H6A0671.jpg (https://gallery.nerdrods.com/Projects/03_D3/07/photos/20161209-_H6A0671.jpg)

qKtC5DirmkA



And a father son truck project from San Antonio I helped with.

https://gallery.nerdrods.com/Customers/CP5559C4/0002%20-%20Rick%20Jake%20Webb/03/thumbnails/20150807-_H6A3053.jpg (https://gallery.nerdrods.com/Customers/CP5559C4/0002%20-%20Rick%20Jake%20Webb/03/photos/20150807-_H6A3053.jpg) https://gallery.nerdrods.com/Customers/CP5559C4/0002%20-%20Rick%20Jake%20Webb/03/thumbnails/20150728-_H6A3020.jpg (https://gallery.nerdrods.com/Customers/CP5559C4/0002%20-%20Rick%20Jake%20Webb/03/photos/20150728-_H6A3020.jpg) https://gallery.nerdrods.com/Customers/CP5559C4/0002%20-%20Rick%20Jake%20Webb/03/thumbnails/20150729-_H6A3034.jpg (https://gallery.nerdrods.com/Customers/CP5559C4/0002%20-%20Rick%20Jake%20Webb/03/photos/20150729-_H6A3034.jpg)

No build thread on this one but it gets a bit of screen time during the other two post.

Later,
-Russell @ Nerd Rods

[ScotI]

The 89 CC dually Tow Truck. The former 90 swb DD. The current build 64....

[WILWAXU]

Here's updated pictures of my truck

- Ridetech StreetGRIP system
- American Racing Torq Thrust II (20x8 & 20x10)
- Mini restoration on the interior

Updated photos, including the high banks of Bristol Motor Speedway on Hot Power Tour 2019 :D

[Aeroking]

https://lh3.googleusercontent.com/P_9c7gjZelZ7OzlvDXiEb_4wq6ugqqILFo6zRPnKE0EZVNWMT1 EYlZYYBVaLCS85JVT_YGLblR9fjqcgWEn0Q8zhj4_LaBufXnwp 8p6_CJXkmcZSDqWRGBw8lMw1YuY3YoZP3aQfTS7HIdbAk4Igqn fAwkEG0WSwgyxdp0fOvl9NTK2hfxBq_K6YBEwgZ03GJOxHgANw DwfdvcSGBgZ6J045HfI1IgIvjEWYLFWNz9NwskLFc20ygMp3O3 pSKo2eBWM1gNCQgPBds5H6VD7R2dy4jRsrtXtiojsdPvisqZ1C sP4JFQtyojog4X3p6VbnN62q7rw6n9GiiBAWh0sP7K9nuLGw-PnwLfCVK1_qsPrJ9kJ9jKjTWQ2PVRUPWLeMVa_2BQtYtrXi0AJ 1N3jYHtT1DrCT9nexU1nlw9BZPWZpxcgFLcbXWs8l7lhyJD9P0 bufw9N8lFCjEKEIwJiSiynMaVj590YCFdu1A1RIW-w63yjrRhJum-a567_ZONbfH3UPC1LQgqPbLAZLMFmh1gyu8HLBQju3k41eL_bG Q97p3LyGyawwqDlTIQ5gplO1NoOX9U8YSW0xA0soyWy4d5ZJ6_ nlIS6rFehEkiYyeT0wmavVE3SWhAZY3LF-DqdIUETU8E54PSt4Thu47qrpyfopbB9MiupDIW2sjl9OphJN2q pBr2bowlE_5YdoUJMUULatmletHyE2_HFvx80GOOK65SkCAjlB 997JZRQqQGrqb8QG=w1665-h937-no

https://lh3.googleusercontent.com/uos9LCetQtHBNZAToIxeB0WPiuNRQyei_L8sO2Zo4vcpZeFd48 QjcI_AOaqngHTZZ4L8SSY27nsVwIqRaIQx91ZqiHDs2iPsaVAn FBuF0NCBZ-BLpBuzq1rn9Ti1GR8NydfLMfLudVYRxkcQ0LrP8lVSfF1BxhfE YTzrj45KnDDuQQFxzy0oPCn4FHZ5qmBBs5e81_Ukwxhh6JTWOB gMawfq-ysYb3jnIBPx-Xava_uPAvzgJpd_Wm8NftHYdnFgwDvIU2VYnK8Pagem9cOHeGf FZMscxQpTgkQX5uy5cbXUp5WyO8KjOyOeHDSEy0O6_t7AUoIJ4-g8SYCF1WoH5XcIybTNKzgB4rI7AuAGsjNNY5pbvez4n9VGns66 ABepb0Pa6mnffKfhzvgEGpFgVDaSvSR_NvZDtrZjSE5dQO94V-VTPhI9e5Zn2OVD9jDYofR9CNq3jL7-c77KlsANuyAgKPh-J6fp0-BbAWpBkBQvXrkBgGpTPdX-mKnwzhm9wWgUkVkY5WMwLAHokes3TG-IfsHgS_e5iOq7VlQ8N9rtXA74exV-OsQflf2i_0tzJu8l-Lo7XhG_IH7htwqK5-ItK-g2OZLcfxZS5RckIg5Fh-VITXqe-pN3wisgNOtPZbD3HkGxIu003B2J79KGRhpiZnSdwilRJwvD3Mq _1u-rkddq2nrtAePrIpNoPkrupe87AonefeyUaUttRKAA8nzEhGfzr lCvFUCyuvGpMZC0AYZ3=w720-h540-no

https://lh3.googleusercontent.com/-Qj7WF1NGEmVsKBEJ50OPpjBqYyisB6Q37tydBoim4k7zVfbumU 1Jq8_4Fsrxe0xgIr3QYTaVj5UwmcBYDAqjNtbDNQVtzHm_KM11 p_j-vmX9z665Q1KriGKdDF4qbajmNAHFtLilP_4tc1gmspI5fKdg1n syXR8DILX82AtKsE_6LD1Nca54OEkKRf3tuHx6HxqTLNPoN8dt xzls64CUY0QHFBZSZBnXjd-SVRbjMcE7UQ3TuvHHAJL3_FGQPWJ_lyKhINH1aWw8SmqtaEVsH xE2LXJ1zg0lvrXuzbtwlrxMN4WvzZy4q-_5gQITLOAulfwQDlUiXkunWzHMOlcq90riB2iWi_Geha1G_1Us lFn9hOZE6pV3_jik-Kk11LCEFzhhytrxY5I-XyzXiUHesY-z1-DMZYvFu0yPV-9Z9Xl9eKBOYX9ESYTINgkQ7Xtgu3G_g__NuCdeFekbB0VxKFn6 R6lCfzwySYDzPET-K_a5A7PwP6Tff9H6FYooCHCLNi1xfLfTaEYL7EqKYBp3PkPP_0 oyLrQnWUPTcEnve60aMb_zW5pKVV-tTrNRotr5W4IOgRtLpa_Qt84JjoIZ0VPv9tqU0gtAj8m_usiw0 0shlbKJJqMc72YVxxs-uFZQl7VTgLzZzqmYpm_jKoj8yN-U0aAcKeu85Cg3rRAlrZ4Feki4e9qUdwrl4sDC7-5R9nvdmW13oRdFc1YSNptTaBSgWi1nEg3hKyygTHqMaJ-LlIY=w720-h540-no

[Duneaholic]

Hi there Gen III hemi headed in this over the winter!!70369

70370

70371

[will69camaro]

https://i.imgur.com/nPkAXfv.jpg

https://i.imgur.com/uRcLjsg.jpg

https://i.imgur.com/ZCg7iPl.jpg?1

Simple little 69 SWB with 350/700R4. Will maybe have LS power and bags in the future but enjoying it's cheap reliability and simplicity.

Lady keeps telling me one project at a time.

[ScotI]

Simple little 69 SWB with 350/700R4. Will maybe have LS power and bags in the future but enjoying it's cheap reliability and simplicity.

Lady keeps telling me one project at a time.

Very nice!

[ScotI]

Hi there Gen III hemi headed in this over the winter!!

Clean, clean.... I like it!

[OPIEYZF2001]

C:\Users\scox\Pictures\Truck

[SuperB70]

Here is mine.
Third Super Duty in 15 years for me. .
2006 F350 6.0PSD.
All normal fixes, updates and tunes done.
SCT with 2 custom tunes by Gearhead, FL
But still a dailydriver (only at summer time)

Made 3 piece 3" wide aluminium arches to rear arches to get them wider. Hidden bolts inside the original urethane fender. Here tire thread cant be seen outside arches.
4-6" DJM lowering kit at rear axle, lowering spring at front.

Also made custom front grill emblem "LowBoy" shapped and bead rolled.

Painted Audi Ipanema brown pearl metallic and Mazda Artic white pearl metallic.

Facelift to 2015 F550, same time bought running boards, mirrows,rear bumper and tailgate w/step.
24s on 305

[zz430droptop67rs]

My daily beater 88 C-1500. Mild 350 with Edelbrock headers, K&N cold air, ported TB, 7004R.

4\6 drop. (Spindles, C-notch, flip kit)

https://live.staticflickr.com/65535/51891848668_9018802a20_z.jpg

[Oleyellar]

All Ford

[DBasher]

Just like her dad.

[HO455]

Here's my hot rod truck. 1988 with a 95 LT1 and a M6, 8.5 3.73 posi.

[camcojb]

looks like fun to me! :thumbsup:

[fleet]

dp5g1C5NelU

https://youtube.com/shorts/dp5g1C5NelU?si=FZc_rLHysE8Q9uZh

https://www.davisautosales.com/inventory

[fleet]

0IyqpujGv38

https://youtube.com/shorts/0IyqpujGv38?si=hNGHPo6y4Qzxte18

[dhutton]

Here’s one I just finished as a painted roller. Should look killer with the Fesler flush mount glass installed

[camcojb]

:king:

[fleet]

Wow!!

:waveflag:

[WSSix]

That's badass, Don.

[fleet]

CS2oxFtRGj8

https://youtu.be/CS2oxFtRGj8?si=XKCpffsP1YZVac40

[fleet]

1MlraU-ff0Q

https://youtube.com/shorts/1MlraU-ff0Q?si=V50_ExmbOq37P7Sy

[WSSix]

So clean. Very nice

[fleet]

A8QO_yJQBjo

https://youtube.com/shorts/A8QO_yJQBjo?si=QfuTSAbhU8fE4TQW

[fleet]

IETbWQQzRcE

https://youtu.be/IETbWQQzRcE?si=MycjTOdLnYg-vTRo

At the @2min mark, Porsche style meets F250 crew interior…
:cool:

[fleet]

Found these reviews while researching this new to me category for a friend who’s specifically interested in V6 AWD/4WD models.

Any input is appreciated.

51X8UjEPnoo

https://youtu.be/51X8UjEPnoo?si=FZ5dJiESjYF2fDmo


XVnY99wyl1M

https://youtu.be/XVnY99wyl1M?si=xdy-njS0yM81ehcK

[fleet]

51X8UjEPnoo

https://youtu.be/51X8UjEPnoo?si=zPixhkNjRiFK1Nss

Reviewers chose the Nissan Frontier Pro4X which begins at the 16min 44 sec mark.

[fleet]

iZI6sMW6fug

https://youtube.com/shorts/iZI6sMW6fug?si=lF4WX_kPjssYfH-1

[fleet]

co5Ity-Df9E

https://youtu.be/co5Ity-Df9E?si=2WlFWqk2ESYLGBNx


https://www.davisautosales.com/windowsticker/vehicle/1249100

[fleet]

4BtTfTY83PQ

https://youtu.be/4BtTfTY83PQ?si=1kKcMdtsCw-zO03c