tremec 6060 conversion

[4GOTNPNY]

im putting a 6060 in my 78 mustang and wanted to convert the output shaft and tail housing to a magnum so i can run teh standard speedo gear and not have the remote shifter the BK5 conversion is out of stock at DandD does anyone know where i can get a conversion kit?

[4GOTNPNY]

Thanks to texts drivetrain performance got all the parts needed I know have a magnum for my coupe

https://uploads.tapatalk-cdn.com/20221210/467e89b11c08dc6e6f4f11cf0883b849.jpg
https://uploads.tapatalk-cdn.com/20221210/1a909cdc052faa0dfa19b46ccef8fa94.jpg
https://uploads.tapatalk-cdn.com/20221210/3aaa6f2a071f0ce05edf07df0407cff2.jpg
https://uploads.tapatalk-cdn.com/20221210/b16447f9e7eddc76d37414f7f4149ef4.jpg
https://uploads.tapatalk-cdn.com/20221210/1f936faf457e0e7be70b2953110b81b4.jpg
https://uploads.tapatalk-cdn.com/20221210/6a390f592365d58e392edad5b3daf824.jpg


Sent from my iPhone using Tapatalk

[gnx7]

Make sure you get rid of the factory 6 bolt shifter because it shifts sloppy and the seal will fail eventually. They all fail.

[CarlC]

Make sure you get rid of the factory 6 bolt shifter because it shifts sloppy and the seal will fail eventually. They all fail.

Yep. I'm on the third one.

Look real close at the boot in the above photo. It's failed.

[4GOTNPNY]

Thank you for the advice I will look into a new shifter I am happy with the result! https://uploads.tapatalk-cdn.com/20230131/a84b968048cea03728d5685f33e0fb94.jpg


Sent from my iPhone using Tapatalk