View Full Version : Hooker LS turbo manifolds
prolificdesigns
03-05-2018, 03:04 PM
I am looking for pictures of first gen Camaros with the hooker LS turbo manifolds. I have some on order and would like to see setups and fitment if anybody has used these on their project.
andrewb70
03-07-2018, 12:58 PM
I am looking for pictures of first gen Camaros with the hooker LS turbo manifolds. I have some on order and would like to see setups and fitment if anybody has used these on their project.
Are you talking about the cast manifolds with the cross over under the transmission? If that's the case, the cast driver's side manifold will not work on a first gen Camaro. You can get just the passenger side manifold and do a different cast manifolds on the driver's side and a custom cross over.
Andrew
prolificdesigns
03-07-2018, 02:13 PM
Yes I am talking about the cast set, does the passenger side hit the steering box I would think there's room for clearance.
andrewb70
03-24-2018, 08:04 AM
Yes I am talking about the cast set, does the passenger side hit the steering box I would think there's room for clearance.
Yes, the driver's side hits the steering box, unless you are in Australia...
Andrew
prolificdesigns
04-19-2018, 09:26 PM
Since the hooker manifold won't fit on driver side does anybody know a ls manifold that will fit on the driver side of a 69 Camaro
prolificdesigns
03-02-2019, 10:43 AM
Just wanted to post an update I was able to make this work with the f body manifold on driver side I’ve posted pictures. This is mountinga. S480 turbo and still using having power steering and a/c
Nice work! I can't wait to drive my turbo Chevelle hopefully this year....
piratebaseball
06-14-2019, 08:10 PM
So you went with an F body manifold on the driver side? What year? Can you show us pictures of that fitting? Did you still use the hooker manifold on the passenger side?
andrewb70
07-04-2019, 12:33 PM
So you went with an F body manifold on the driver side? What year? Can you show us pictures of that fitting? Did you still use the hooker manifold on the passenger side?
My guess is the driver's side is 4th gen F-body, but it would be nice to get a confirmation.
Andrew
sls1025
07-13-2019, 10:26 AM
Hello,
Very nice. If I might ask what front accessory drive kit\system did you utilize?
Thank you
prolificdesigns
12-03-2019, 11:20 AM
sorry for delayed response, the driver side is the fbody manifold and passenger side was holley manifold. The pulley kit I used was one I made.
vBulletin® v3.8.11, Copyright ©2000-2025, vBulletin Solutions Inc.