QuintinBrothers
01-21-2018, 05:43 PM
Item Location (City/State): Williston, VT
Price: $168,000 OBO
Description:
1968 Camaro, This entire car is BRAND new.. Not one piece of this car is from 1968, Including the body. The whole body of this car is brand new metal with its own vin tag, essentially you are purchasing a 2017, 1968 Camaro. This car features tons of convenience features including power windows, keyless entry, power locks, power steering, electric E-Brake, Bluetooth climate control and more! This car is equipped with an one of a kind stereo system, finished with the luxurious black interior with accent red stitch. This car rides like a brand new exotic with a full custom frame with 4 link and coil over suspension and 3 piece transparent red wheels. This car does not lack any power as the supercharged LS3 puts out right at 800hp and drives like an everyday car when you want it to. We followed this up with full stainless exhaust and custom paint and body work with a huge amount of hours invested.
We are asking $168,000 OBO for this beauty, and below is a detailed overview of the entire build.
I have over 3,000 photos of this car and we are ready to make a deal!
EXTERIOR:
- Full Dynacorn brand new body- This is the actual shell of the car-
brand new body with a full legal vin- nothing 1968 on this one!
- The whole car is custom pained in World Rally Blue with added flake in
the finish with a full metallic black stripe.
-FESLER flush mount windows all the way around- no ugly trim anymore on
this one!
-FESLER black anodized billet hood and trunk hinges
-FESLER HID headlights
-FESLER LED fog and tail lights
-FESLER stainless door strikers
-FESLER black anodized door jamb vents
-FESLER black anodized billet door handles
-FESLER black anodized billet battery tray mounted in trunk behind TMI
panels
-Full AMD front fenders and extensions- BRAND NEW metal
-Custom built cowl hood that was split open on the cowl and given a
slight raise in the front to clear the Holley HI-RAM intake- Very clean
look with tons of hours invested
-Fully shaved roof/window drip rails
-Shaved door locks and marker light holes
-Smoothed and Sharpened body lines
-100% carbon fiber wiper/vent cowl with custom screening
-100% carbon fiber front and rear spoiler
-100% carbon fiber side mirrors
-100% carbon fiber fender braces with black rod ends
-Carbon fiber front valance with FESLER fog lights
-100% carbon fiber front inner fenders
-100% carbon fiber door sill plates
-Custom built black billet grille finished in metallic black to accent
the stripe on car
-tucked/shaved front and rear bumpers finished in metallic black to
accent grille and stripe
-DSE full mini-tub done on car with frame modification to fit the huge
tires under the rear
-Ride Tech black anodized billet fuel cap
-Custom AutoRad billet aluminum radiator support
-Quic-Latch hood release pins- just simple push of two of the pins that
release the latch
-Full rain-gear hidden wiper assembly
INTERIOR:
-FESLER door panels with custom modifications done to move speakers down
to kick panels and out of the doors- finished in black/suede and red
stitch to accent the rest of the interior
-FESLER black billet anodized door armrests and inside door handles
-Over 100sq ft of Dynamat throughout the car for the best sound and heat
resistance around- Need to keep the heat and noise out and the music in!
-100% carbon fiber Racepak gauge cluster
-Full Racepak IQ3 street dash system with everything that your brand new
2017 Corvette has for gauges and monitors!
-TMI sport XR front and rear seats to match the rest of the full custom
interior
-TMI sport XR trunk inserts- This covers all the ugly in the truck and
gives it a real nice finished look to accent the interior!
-TMI full suede headliner
-TMI suede sunvisors
-Simpson seat belts to add to the red accent and specific look of the
car that we were going for.
-Complete Resto-Mod air BANTAM 2 ultra blue tooth climate control system
that is controlled with the IPAD Mini 4 mounted in the dash.
-Resto-Mod air billet red and black climate vents throughout the entire car
-Custom built shallow glove box setup
-Custom hand made IPAD mount to hold the IPAD mini 4 that controls all
climate control and the full JL audio stereo system.
-Custom center console based off a 2017 Camaro ZL1 console but refined
and rebuilt to work in this sweet camaro!
-Winters Performance shifter with custom painted bezel and housing to
match grille, stripe and bumpers.
-Custom made window switches, lock switches and electric E-Brake switch
all mounted in the center console
-Custom upholstered side bolsters, dash pad, door panels and armrest to
match the full custom interior
-Full custom made and designed rear package tray- designed around the JL
audio speaker and sub setup
-Custom ACC plush style "essex" 1 piece carpet
-Full NU-Relics power window kit and fixed side rear windows
-Modo Innovations keyless entry and electric trunk latch
-LED lights throughout the interior
-E-Stopp electric emergency brake controlled by button on center console
-Optima yellow top battery mounted in the trunk with the FESLER billet
battery box
-Black anodized IDIDIT tilt steering column, with a sweet billet
specialties steering wheel mounted to it
-Full Custom Modified Ron Francis wiring throughout the entire car
-Push button start (everything on this car is slick push button- no ugly
switches here!)
ENGINE BAY:
-GM performance LS3 Crate Engine- Brand New!
-Full Procharger D-1X system finished in black with "race" bypass valve
-Full custom built, TIG welded inter-cooler piping finished off
beautifully and painted in body color of the car.
-Custom smoothed out Holley Hi-Ram intake finished in body color and
running Holley EFI fuel rails (tons of hours in this one)
-Holley 302-s oil pan to fit on the Roadster Shop chassis.
-Deatschwerks 88lb fuel injectors
-All VIBRANT silicone couplers in the engine bay
-Texas Speed custom grind COMP cam with Texas Speed dual valve spring
upgrade
-Full Ricks stainless fuel tank with dual 440lph pumps mounted in tank
-All VIBRANT black braided hoses and VIBRANT black -AN fittings
-MSD spark plug wires
-Custom AFCO black finish radiator with Billet Specialties cap and dual
electric fans
-GATES powergrip hose clamps- All heatshrunk- NO stainless clamps!
-Billet Specialties black overflow tank
-100% real carbon fiber valve covers
-Built 4L80E Automatic Transmission
-Hughes 2800 Stall Converter
-Custom built aluminum driveshaft
-LOKAR black transmission dipstick
-Full custom made PSI engine harness
-Full custom tune in house by Quintin Brothers Auto & Performance
-Stainless ultimate headers supplied from the Roadster Shop
-VIBRANT flex pipes
-Full TIG welded 3" stainless custom built exhaust running black window
mufflers and black tips
-Custom Built Radiator filler panel
-Tuff Stuff A/C compressor
-Black PowerMaster alternator
-Black powdercoated Moroso power steering resovoir
-Resto-Mod Air A/C condenser, Custom A/C lines and Black Anodized
firewall bulkhead with black fittings
-WIX oil filter and filled with Brad Penn oil.
-This combination made a very drive-able 800hp with more room to go!
IN CAR ELECTRONICS:
- I Pad MINI 4 mounted in custom dash bezel
- JL AUDIO TWK 88 DSP processor
- JL AUDIO bluetooth adpater
- JL AUDIO XD-7005V2 700Watt AMP
- JL AUDIO C2 6.5" front component speakers mounted in custom kick trays
- JL AUDIO W3 10" subwoofer
- JL AUDIO C2 6x9 rear speakers
- MD custom made floating subwoofer enclosure with flush mounted AMP
- STINGER power and ground wiring
- STINGER RCA's
- STINGER distribution blocks
- STINGER battery terminals
- STINGER 300 amp circuit breaker
- ALL wiring on the car is TEFLON coated
Chassis/Suspension/Wheels-Tires:
- Full custom made Roadster Shop SPEC chassis, color matched to body and
underside of car with hours and hours of smoothing going into making the
frame PERFECT.
-Roadster Shop front sway bar
-Roadster Shop Triangulated 4-Link rear setup
-Ford 9" rear end with 3:70 true trac posi
-All suspension components and rear end powder coated semi-gloss black
-AFCO double adjustable coil overs at all 4 corners
-Wilwood PRO spindles
-Full BAER PRO + 14" drilled/slotted brakes at all 4 corners with
black/red calipers and anodized "fire red" master cylinder and 6 piston
calipers
-FORGELINE DE3C 3 piece wheels coated in transparent red with custom
engraved "QB" center caps and hidden hardware- 19x8.5" front with
245/35/19 Michelin Pilot Super Sports and 20x12" rear with 335/30/20
Michelin Pilot Super Sport tires and finished off with Gorllia black lug
nuts all the way around.
Everything is BRAND NEW on this car.. Nothing 1968 left! Enjoy the
looks of the iconic 1968 Camaro, while you have a car performing and
feeling like your brand new exotic car!
Few last words... This car was entered into the Battle of the Builders
at SEMA and out of the 320+ cars entered, this one made it down to the
final 70 in all the SEMA! We made a huge impact out there with the car,
so it is well known with some very large companies! Ken Lingenfelter
came over and picked it as one of his 3 favorite cars at SEMA 2017! We
are currently working on a feature in Super Chevy and the publicity for
this car is not going to stop there! We planned to make a huge impact
and that is what we intend to keep doing.
Thanks so much!
In addition to this, we are now looking to build next years SEMA car to
debut at SEMA 2018. We would love to work with you on this next adventure!
Please let us know if you have any interest in this car, or getting a
SEMA car built!
Price: $168,000 OBO
Description:
1968 Camaro, This entire car is BRAND new.. Not one piece of this car is from 1968, Including the body. The whole body of this car is brand new metal with its own vin tag, essentially you are purchasing a 2017, 1968 Camaro. This car features tons of convenience features including power windows, keyless entry, power locks, power steering, electric E-Brake, Bluetooth climate control and more! This car is equipped with an one of a kind stereo system, finished with the luxurious black interior with accent red stitch. This car rides like a brand new exotic with a full custom frame with 4 link and coil over suspension and 3 piece transparent red wheels. This car does not lack any power as the supercharged LS3 puts out right at 800hp and drives like an everyday car when you want it to. We followed this up with full stainless exhaust and custom paint and body work with a huge amount of hours invested.
We are asking $168,000 OBO for this beauty, and below is a detailed overview of the entire build.
I have over 3,000 photos of this car and we are ready to make a deal!
EXTERIOR:
- Full Dynacorn brand new body- This is the actual shell of the car-
brand new body with a full legal vin- nothing 1968 on this one!
- The whole car is custom pained in World Rally Blue with added flake in
the finish with a full metallic black stripe.
-FESLER flush mount windows all the way around- no ugly trim anymore on
this one!
-FESLER black anodized billet hood and trunk hinges
-FESLER HID headlights
-FESLER LED fog and tail lights
-FESLER stainless door strikers
-FESLER black anodized door jamb vents
-FESLER black anodized billet door handles
-FESLER black anodized billet battery tray mounted in trunk behind TMI
panels
-Full AMD front fenders and extensions- BRAND NEW metal
-Custom built cowl hood that was split open on the cowl and given a
slight raise in the front to clear the Holley HI-RAM intake- Very clean
look with tons of hours invested
-Fully shaved roof/window drip rails
-Shaved door locks and marker light holes
-Smoothed and Sharpened body lines
-100% carbon fiber wiper/vent cowl with custom screening
-100% carbon fiber front and rear spoiler
-100% carbon fiber side mirrors
-100% carbon fiber fender braces with black rod ends
-Carbon fiber front valance with FESLER fog lights
-100% carbon fiber front inner fenders
-100% carbon fiber door sill plates
-Custom built black billet grille finished in metallic black to accent
the stripe on car
-tucked/shaved front and rear bumpers finished in metallic black to
accent grille and stripe
-DSE full mini-tub done on car with frame modification to fit the huge
tires under the rear
-Ride Tech black anodized billet fuel cap
-Custom AutoRad billet aluminum radiator support
-Quic-Latch hood release pins- just simple push of two of the pins that
release the latch
-Full rain-gear hidden wiper assembly
INTERIOR:
-FESLER door panels with custom modifications done to move speakers down
to kick panels and out of the doors- finished in black/suede and red
stitch to accent the rest of the interior
-FESLER black billet anodized door armrests and inside door handles
-Over 100sq ft of Dynamat throughout the car for the best sound and heat
resistance around- Need to keep the heat and noise out and the music in!
-100% carbon fiber Racepak gauge cluster
-Full Racepak IQ3 street dash system with everything that your brand new
2017 Corvette has for gauges and monitors!
-TMI sport XR front and rear seats to match the rest of the full custom
interior
-TMI sport XR trunk inserts- This covers all the ugly in the truck and
gives it a real nice finished look to accent the interior!
-TMI full suede headliner
-TMI suede sunvisors
-Simpson seat belts to add to the red accent and specific look of the
car that we were going for.
-Complete Resto-Mod air BANTAM 2 ultra blue tooth climate control system
that is controlled with the IPAD Mini 4 mounted in the dash.
-Resto-Mod air billet red and black climate vents throughout the entire car
-Custom built shallow glove box setup
-Custom hand made IPAD mount to hold the IPAD mini 4 that controls all
climate control and the full JL audio stereo system.
-Custom center console based off a 2017 Camaro ZL1 console but refined
and rebuilt to work in this sweet camaro!
-Winters Performance shifter with custom painted bezel and housing to
match grille, stripe and bumpers.
-Custom made window switches, lock switches and electric E-Brake switch
all mounted in the center console
-Custom upholstered side bolsters, dash pad, door panels and armrest to
match the full custom interior
-Full custom made and designed rear package tray- designed around the JL
audio speaker and sub setup
-Custom ACC plush style "essex" 1 piece carpet
-Full NU-Relics power window kit and fixed side rear windows
-Modo Innovations keyless entry and electric trunk latch
-LED lights throughout the interior
-E-Stopp electric emergency brake controlled by button on center console
-Optima yellow top battery mounted in the trunk with the FESLER billet
battery box
-Black anodized IDIDIT tilt steering column, with a sweet billet
specialties steering wheel mounted to it
-Full Custom Modified Ron Francis wiring throughout the entire car
-Push button start (everything on this car is slick push button- no ugly
switches here!)
ENGINE BAY:
-GM performance LS3 Crate Engine- Brand New!
-Full Procharger D-1X system finished in black with "race" bypass valve
-Full custom built, TIG welded inter-cooler piping finished off
beautifully and painted in body color of the car.
-Custom smoothed out Holley Hi-Ram intake finished in body color and
running Holley EFI fuel rails (tons of hours in this one)
-Holley 302-s oil pan to fit on the Roadster Shop chassis.
-Deatschwerks 88lb fuel injectors
-All VIBRANT silicone couplers in the engine bay
-Texas Speed custom grind COMP cam with Texas Speed dual valve spring
upgrade
-Full Ricks stainless fuel tank with dual 440lph pumps mounted in tank
-All VIBRANT black braided hoses and VIBRANT black -AN fittings
-MSD spark plug wires
-Custom AFCO black finish radiator with Billet Specialties cap and dual
electric fans
-GATES powergrip hose clamps- All heatshrunk- NO stainless clamps!
-Billet Specialties black overflow tank
-100% real carbon fiber valve covers
-Built 4L80E Automatic Transmission
-Hughes 2800 Stall Converter
-Custom built aluminum driveshaft
-LOKAR black transmission dipstick
-Full custom made PSI engine harness
-Full custom tune in house by Quintin Brothers Auto & Performance
-Stainless ultimate headers supplied from the Roadster Shop
-VIBRANT flex pipes
-Full TIG welded 3" stainless custom built exhaust running black window
mufflers and black tips
-Custom Built Radiator filler panel
-Tuff Stuff A/C compressor
-Black PowerMaster alternator
-Black powdercoated Moroso power steering resovoir
-Resto-Mod Air A/C condenser, Custom A/C lines and Black Anodized
firewall bulkhead with black fittings
-WIX oil filter and filled with Brad Penn oil.
-This combination made a very drive-able 800hp with more room to go!
IN CAR ELECTRONICS:
- I Pad MINI 4 mounted in custom dash bezel
- JL AUDIO TWK 88 DSP processor
- JL AUDIO bluetooth adpater
- JL AUDIO XD-7005V2 700Watt AMP
- JL AUDIO C2 6.5" front component speakers mounted in custom kick trays
- JL AUDIO W3 10" subwoofer
- JL AUDIO C2 6x9 rear speakers
- MD custom made floating subwoofer enclosure with flush mounted AMP
- STINGER power and ground wiring
- STINGER RCA's
- STINGER distribution blocks
- STINGER battery terminals
- STINGER 300 amp circuit breaker
- ALL wiring on the car is TEFLON coated
Chassis/Suspension/Wheels-Tires:
- Full custom made Roadster Shop SPEC chassis, color matched to body and
underside of car with hours and hours of smoothing going into making the
frame PERFECT.
-Roadster Shop front sway bar
-Roadster Shop Triangulated 4-Link rear setup
-Ford 9" rear end with 3:70 true trac posi
-All suspension components and rear end powder coated semi-gloss black
-AFCO double adjustable coil overs at all 4 corners
-Wilwood PRO spindles
-Full BAER PRO + 14" drilled/slotted brakes at all 4 corners with
black/red calipers and anodized "fire red" master cylinder and 6 piston
calipers
-FORGELINE DE3C 3 piece wheels coated in transparent red with custom
engraved "QB" center caps and hidden hardware- 19x8.5" front with
245/35/19 Michelin Pilot Super Sports and 20x12" rear with 335/30/20
Michelin Pilot Super Sport tires and finished off with Gorllia black lug
nuts all the way around.
Everything is BRAND NEW on this car.. Nothing 1968 left! Enjoy the
looks of the iconic 1968 Camaro, while you have a car performing and
feeling like your brand new exotic car!
Few last words... This car was entered into the Battle of the Builders
at SEMA and out of the 320+ cars entered, this one made it down to the
final 70 in all the SEMA! We made a huge impact out there with the car,
so it is well known with some very large companies! Ken Lingenfelter
came over and picked it as one of his 3 favorite cars at SEMA 2017! We
are currently working on a feature in Super Chevy and the publicity for
this car is not going to stop there! We planned to make a huge impact
and that is what we intend to keep doing.
Thanks so much!
In addition to this, we are now looking to build next years SEMA car to
debut at SEMA 2018. We would love to work with you on this next adventure!
Please let us know if you have any interest in this car, or getting a
SEMA car built!