JB64CHEVELLE
11-07-2017, 07:00 PM
Item Location (City/State):Livermore, Ca
Price:$30k
Description:
1964 Chevelle SS
I bought this Chevelle as a done restored back to original car and decided to go protouring on it.
Parts list:
2002 Camaro SS Ls1 and T56 with 25k miles on them
Mast Motorsports oil pan
Speartech harness
Built narrowed and powder coated 12bolt rear with 3.90 posi
DSE SPEED KIT 3 front and rear suspension
DSE DOUBLE Adjustable coilovers front and rear
DSE splined front swaybar
DSE rear swaybar
DSE Quick ratio coated steering box
DSE Master cylinder and brake booster
Baer 13" /12" brakes 2piece rotors all around
AutoRad core support kit with radiator, fans, condenser
Vintage Air Magnum kit
Vaporworx fuel tank and pump with corner pick-ups
American Auto wire classic update wire harness
ABC mini tub kit with inner wheel wells, frame boxing plates and trans xmbr -NOT INSTALLED YET
Ididit column
MGW shifter
Powder coated all the front end supports, headlight buckets, grille support hood latch, bumper brackets
Optima battery in the trunk
Smoothed firewall
The trim that you see off the car I have it.
The trans tunnel was cut out front to rear and replaced with a raised one for the T56.
All parts are new in boxes or installed on car already.
I will get some better pictures as soon as I move some cars around.
To finish this car it will need headers, exhaust, clutch & pressure plate, driveshaft, wheels & tires, fuel & brake lines, gauges, carpet kit. Possibly a few little things too I cant think of right now.
If you have any questions email me [email protected]
Price:$30k
Description:
1964 Chevelle SS
I bought this Chevelle as a done restored back to original car and decided to go protouring on it.
Parts list:
2002 Camaro SS Ls1 and T56 with 25k miles on them
Mast Motorsports oil pan
Speartech harness
Built narrowed and powder coated 12bolt rear with 3.90 posi
DSE SPEED KIT 3 front and rear suspension
DSE DOUBLE Adjustable coilovers front and rear
DSE splined front swaybar
DSE rear swaybar
DSE Quick ratio coated steering box
DSE Master cylinder and brake booster
Baer 13" /12" brakes 2piece rotors all around
AutoRad core support kit with radiator, fans, condenser
Vintage Air Magnum kit
Vaporworx fuel tank and pump with corner pick-ups
American Auto wire classic update wire harness
ABC mini tub kit with inner wheel wells, frame boxing plates and trans xmbr -NOT INSTALLED YET
Ididit column
MGW shifter
Powder coated all the front end supports, headlight buckets, grille support hood latch, bumper brackets
Optima battery in the trunk
Smoothed firewall
The trim that you see off the car I have it.
The trans tunnel was cut out front to rear and replaced with a raised one for the T56.
All parts are new in boxes or installed on car already.
I will get some better pictures as soon as I move some cars around.
To finish this car it will need headers, exhaust, clutch & pressure plate, driveshaft, wheels & tires, fuel & brake lines, gauges, carpet kit. Possibly a few little things too I cant think of right now.
If you have any questions email me [email protected]