Before I make Purchase-tell me

[Shiner]

I am looking to buy the Aeromotive 340 Stealth tank and Holley Sniper EFI for my 70 Chevelle.

Are there any issues with any of these items? I am also running an MSD eCurve and 6AL box, will i easily be able to control the timing inside the car with the controller?

If anyone wants a badass Steve Taylor PRC Holley 4150 650 Double Pumper let me know. Its teflon coated as well.

[Build-It-Break-it]

See link below,Rick's tank and vapor works controller if you want it to run right out of the box.

http://www.pro-touring.com/threads/115321-Aeromotive-Stealth-Fuel-tank-issues?highlight=Aeromotive

[Shiner]

See link below,Rick's tank and vapor works controller if you want it to run right out of the box.



http://www.pro-touring.com/threads/115321-Aeromotive-Stealth-Fuel-tank-issues?highlight=Aeromotive



If I want to run what our of the box? Can the Holley Sniper still control the pump?


Sent from my iPhone using Tapatalk

[Shiner]

The tank and controller that'd be a 2000 gas tank


Sent from my iPhone using Tapatalk

[DBasher]

Shiner, head over to Holleys website and download the instructions for the Sniper set up. I've got the set up but skipped right over the instructions for a MSD box, I'm just locking out my distributor and letting the system take control.

I'll take a look when I'm home and see what the deal is...just so I'm clear, you're looking to control timing from the Holley hand held using a MSD box correct?

:cheers:

[Shiner]

Shiner, head over to Holleys website and download the instructions for the Sniper set up. I've got the set up but skipped right over the instructions for a MSD box, I'm just locking out my distributor and letting the system take control.



I'll take a look when I'm home and see what the deal is...just so I'm clear, you're looking to control timing from the Holley hand held using a MSD box correct?



:cheers:



Correct. My MSD ecurve is locked out and I want to hook up the ignition to the Holley Sniper and control timing there.

Also looking for general feedback with ththe sniper system as a whole versus FiTech and reviews of the Aeromotive 340 stealth tank


Sent from my iPhone using Tapatalk

[DBasher]

I haven't looked at the Aeromotive tank and I'm not sure what power level you're at...would this work?

https://www.holley.com/products/fuel_systems/fuel_tanks/parts/19-107

[Shiner]

I haven't looked at the Aeromotive tank and I'm not sure what power level you're at...would this work?



https://www.holley.com/products/fuel_systems/fuel_tanks/parts/19-107



I made 430/571 through my automatic on a mustang dyno. So I'm think 515-520 at the crank. I don't want to have to upgrade again if I go to a big block etc. thoughts?


Sent from my iPhone using Tapatalk

[DBasher]

Check out page 14&15, should be good to go.

http://documents.holley.com/199r11031r.pdf

[Shiner]

Cool


Sent from my iPhone using Tapatalk

[l2azorback]

I would recommend giving Ricks Tanks a call to review your application. I am running a 540ci BBC and have approx 23.5 gallons in my tank. Ricks was able to custom make my tank and the fit/finish is second to none. Buy a Ricks Tank and you will be pleased!