Stainless Works Turbo Headers

[fillpot]

Has anyone on here used these, and maybe a little input, pics etc, going to be used on a 69 Camaro with a Ls motor. THANKS!

[6D9 Matt]

Subscribed. I am hoping to go turbo soon also, and have a 416ci LS3

[Dave95z28]

I know there are some pictures on www.ls1tech.com under the swap section or the forced induction section. You might perform a search there.

Dace

[Dave95z28]

I know there are some pictures on www.ls1tech.com under the swap section or the forced induction section. You might perform a search there.

Dave

[gnx7]

I use the Stainless works up and forward headers on my turbo LS9 RX-7 with a custom crossover into a single 88mm T4 turbo. They have about 5K hard miles on them and have yet to crack/fail. While not cheap.... they are durable I'm making around 1400hp thru them with 2.25" crossover piping and 3.5" downpipe.

[6D9 Matt]

Anyone heard anything more on the Holley/Hooker LS turbo headers coming out? I know people saw them at a few events late last fall, but not available yet... seem like a good option between cheap ebays/truck manifolds and the SW headers.

https://www.holley.com/products/exhaust/headers_and_exhaust_manifolds/exhaust_manifolds/parts/8510HKR