navyflyer72
07-22-2016, 02:24 PM
SOLD
Item Location (City/State): Owings, Maryland
Price: $3850
Description:
I bought this for my '67 Camaro pro-touring project that went sideways. One of the only good things to come back from a shady restoration shop was the GM Performance ZZ383 425hp/449ft/lbs tq engine. I had just finished stripping her down to a bare block and putting a fresh coat of high temp paint on her and so she is ready to go. This engine is pretty much perfect. I was going to save this for a future project, but finances are tough and she has to go. My loss, someone's big gain.
I say "pretty much perfect, because when we picked up the shell of my Camaro from "A shady custom shop" in Orlando, Florida, the owner (Frank) had lightly dented the bottom of the oil pan. I have replaced the valve covers with brand new GM Performance upgraded center bolt valve covers that come on the deluxe 450hp version of the ZZ383 (I have the stock ZZ383 valve covers and you can have them also). The dent in the oil pan is superficial and will not affect the operation of the oil pan/pump. You could drop the pan and bang out the dent if you want, but you'd probably have to touch up the paint afterwards.
I will sell the engine as a short block for $3850 (that's a $3030 savings from the GM Performance price of $6882)
or if you want a complete ZZ383 with an Edelbrock Air Gap Performer aluminum intake and 1"phenol carburator spacer and thermostat housing, plus a few other bits and pieces to include a rolling engine cradle. I''ll sell it all for $4500. That's about $7800 worth of engine and parts for $4500 (save yourself over $3300 for you transmission and more!).
Email me for some pics of when I was prepping and painting the engine.
You can read all about this GM motor at this link:
http://www.chevrolet.com/performance/crate-engines/small-block-zz-383.html
Here are the engine specifics from the website.
ZZ383 TECH SPECS
Part Number: 19154775
Engine Type: Chevy Small-Block V-8
Displacement (cu. in.): 383
Bore x Stroke (in.): 4.000 x 3.800
Block (P/N 88962516): Cast-iron with four-bolt main caps
Crankshaft (P/N 12489436): 4340 forged steel
Connecting Rods (P/N 12497624): Heavy-duty PM steel
Pistons (P/N 12499103): Hypereutectic aluminum
Camshaft Type (P/N 19210723): Hydraulic roller
Camshaft Lift (in.): .509 intake / .528 exhaust
Camshaft Duration (@.050 in.): 222°intake / 230° exhaust
Cylinder Heads (P/N 12464298): Fast Burn aluminum; 62-cc chambers
Valve Size (in.): 2.000 intake / 1.550 exhaust
Compression Ratio: 9.6:1
Rocker Arms (P/N 12367345): Aluminum roller style
Rocker Arm Ratio: 1.5:1
Recommended Fuel: 92 octane
Ignition Timing: Base 10° BTDC, 32° Total
Maximum Recommended rpm: 6000
Balanced: External
Item Location (City/State): Owings, Maryland
Price: $3850
Description:
I bought this for my '67 Camaro pro-touring project that went sideways. One of the only good things to come back from a shady restoration shop was the GM Performance ZZ383 425hp/449ft/lbs tq engine. I had just finished stripping her down to a bare block and putting a fresh coat of high temp paint on her and so she is ready to go. This engine is pretty much perfect. I was going to save this for a future project, but finances are tough and she has to go. My loss, someone's big gain.
I say "pretty much perfect, because when we picked up the shell of my Camaro from "A shady custom shop" in Orlando, Florida, the owner (Frank) had lightly dented the bottom of the oil pan. I have replaced the valve covers with brand new GM Performance upgraded center bolt valve covers that come on the deluxe 450hp version of the ZZ383 (I have the stock ZZ383 valve covers and you can have them also). The dent in the oil pan is superficial and will not affect the operation of the oil pan/pump. You could drop the pan and bang out the dent if you want, but you'd probably have to touch up the paint afterwards.
I will sell the engine as a short block for $3850 (that's a $3030 savings from the GM Performance price of $6882)
or if you want a complete ZZ383 with an Edelbrock Air Gap Performer aluminum intake and 1"phenol carburator spacer and thermostat housing, plus a few other bits and pieces to include a rolling engine cradle. I''ll sell it all for $4500. That's about $7800 worth of engine and parts for $4500 (save yourself over $3300 for you transmission and more!).
Email me for some pics of when I was prepping and painting the engine.
You can read all about this GM motor at this link:
http://www.chevrolet.com/performance/crate-engines/small-block-zz-383.html
Here are the engine specifics from the website.
ZZ383 TECH SPECS
Part Number: 19154775
Engine Type: Chevy Small-Block V-8
Displacement (cu. in.): 383
Bore x Stroke (in.): 4.000 x 3.800
Block (P/N 88962516): Cast-iron with four-bolt main caps
Crankshaft (P/N 12489436): 4340 forged steel
Connecting Rods (P/N 12497624): Heavy-duty PM steel
Pistons (P/N 12499103): Hypereutectic aluminum
Camshaft Type (P/N 19210723): Hydraulic roller
Camshaft Lift (in.): .509 intake / .528 exhaust
Camshaft Duration (@.050 in.): 222°intake / 230° exhaust
Cylinder Heads (P/N 12464298): Fast Burn aluminum; 62-cc chambers
Valve Size (in.): 2.000 intake / 1.550 exhaust
Compression Ratio: 9.6:1
Rocker Arms (P/N 12367345): Aluminum roller style
Rocker Arm Ratio: 1.5:1
Recommended Fuel: 92 octane
Ignition Timing: Base 10° BTDC, 32° Total
Maximum Recommended rpm: 6000
Balanced: External