View Full Version : 15' Camaro SS L99 6.2L engine w/6L80E trans pullout
jwcarguy
01-13-2016, 09:57 PM
Item Location (City/State):Las Vegas, NV
Price:7800
Description:
I have a engine and trans package that I was going to use for a 68 Camaro project (also listed for sale here), but need to free up finances for new shop to be built, so both are up for sale
It is a 6.2L L99 engine from a 2015 Camaro SS with 6800 miles, complete pullout with all front accessory drive, A/C compressor, engine harness & pcm, exhaust manifolds, engine cover, engine mounts, etc
also has the 6L80E auto 6 speed transmission
Offering it to fellow pro-touring & off road members first before they go on Ebay
This is the "new crate" version of the complete 2015 Camaro SS pullout that I am selling w/ 6800 miles , complete front accessory drive, engine harness & pcm and a 6L80E 6spd auto trans http://www.jegs.com/i/Chevrolet+Performance/809/19244102/10002/-1
I have this priced extremely well and know the market on them, not willing to split the engine and trans up (unless two confirmed sales are made)
Shipping is buyers expense and responsibility or local pickup here in Las Vegas
$7800 for complete engine and trans pullout PRICE DROP 1/28 $7600 firm! SOLD!!
pm/call/ text (702)677-4085
Thanks, Jeff
69lsvert
01-14-2016, 02:02 AM
Sweet deal. Bought mine way to early for my project. Glws
jwcarguy
01-19-2016, 04:08 PM
bump it up
jwcarguy
01-24-2016, 08:23 AM
This is the "new crate" version of the complete 2015 Camaro SS pullout that I am selling w/ 6800 miles , complete front accessory drive, engine harness & pcm and a 6L80E 6spd auto trans http://www.jegs.com/i/Chevrolet+Performance/809/19244102/10002/-1
Jeff
jwcarguy
01-26-2016, 04:44 PM
bump it up
chevelleshack
01-28-2016, 11:22 AM
By the looks of the size of that transmission , any chance of it fitting in a 3rd gen camaro without butchering the floor ?
jwcarguy
01-28-2016, 11:47 AM
By the looks of the size of that transmission , any chance of it fitting in a 3rd gen camaro without butchering the floor ?
Just a little tunnel modification
Worth the work / effort
chevelleshack
01-28-2016, 04:30 PM
Guaranteed to be worth the trouble but with the car only having 40,000 miles on it & my wife buying it new , i might be out in the street if i cut up her car ! Might have to look into exactly how much cutting is needed ........
jwcarguy
01-28-2016, 04:41 PM
Guaranteed to be worth the trouble but with the car only having 40,000 miles on it & my wife buying it new , i might be out in the street if i cut up her car ! Might have to look into exactly how much cutting is needed ........
This is off the site:
http://www.thirdgen.org/forums/transmissions-drivetrain/659393-did-someone-fit-6l80e.html
kestell123
Junior Member
Join Date: May 2009
Location: wisconsin
Posts: 22
Car: 1991 camaro convertible
Engine: lc9 5.3 dod+vvt
Transmission: 6l80
Axle/Gears: 9bolt 277 posi
Classifieds Rating: (0)
Re: Did someone fit an 6L80e into a '91 Z28?
I am just finishing a 6l80 swap into a 1991 camaro.The car is running and in for a dyno tune right now. I did need to raise the tunnel 1.5 inches .I cut the same amount out of the side of the console and used a standard size radio inplace of the stock double din unit. It looks very good! I used an LC9 5.3 from a 2011 silverado with an LS2 intake and a 6l80 from a 2011 camaro. I used Spohn engine mounts with 4th gen isolators. For the trans. I used a Spohn cross member and tourqe arm for a t56. With the 2011 camaro trans mount I needed a 1.25 inch spacer to raise the back of the trans.When I cut the tunnel I all the console mounting points on the peice I cut out . I cut just in front of the floor brace to leave that intact. The front cut was just behind the dash so there would be no welding right under the dash. I spaced up the console part 1.5 inches and I then cut slots in the bellhousing area and bent that up to meet the spaced up console area. I then Had I local fabricator fill in the gaps.
Last edited by kestell123; 09-01-2012 at 11:00 AM. Reason: addition
jwcarguy
01-28-2016, 06:00 PM
PRICE DROP $7600 firm!
Vega$69
02-06-2016, 06:05 PM
PRICE DROP $7600 firm!
Jeff. Will you sell the engine less tranny? I know a guy may want it. Not me. Lol
jwcarguy
02-06-2016, 06:46 PM
Jeff. Will you sell the engine less tranny? I know a guy may want it. Not me. Lol
John
I sold the whole package just the other day
Thanks, Jeff
69x22
02-07-2016, 04:16 AM
Guaranteed to be worth the trouble but with the car only having 40,000 miles on it & my wife buying it new , i might be out in the street if i cut up her car ! Might have to look into exactly how much cutting is needed ........
Nice Iroc
Vega$69
02-07-2016, 07:42 AM
John
I sold the whole package just the other day
Thanks, Jeff
Congrats
vBulletin® v3.8.11, Copyright ©2000-2025, vBulletin Solutions Inc.