Ultimate Headers - MCB is now a Direct Distributor - Excellent LS swap Fitments!

[MCB Matt]

We are proud to now offer another selection for you, Ultimate headers!

They are known as one of the best fitting 321 Stainless headers with 5 finish choices! With several designs available from Full Length to shorty's!

FREE shipping for a limited time

Take a look at some info below and let us know what you need!

Patented design (U.S. Patent US D700,554 S)

Includes premium corrosion and heat-resistant ARP (Automotive Racing Products) 12-point, 300 grade stainless steel bolts and washers

Jig fixture, TIG welded for precise quality control

Easy to install

Large (1-7/8”) header tubes made of 321 Stainless Steel

Rear dump design positions the tubes away from steering shafts and frame rails

Header tubes are mounted high and tight, makes a very compact, space efficient package

Eye catching flanges add dramatic improvement to the engine compartment
Package includes everything needed for the installation -- headers, ARP 12-point Stainless Steel bolts & washers and Mr. Gasket MLS (Multi Layer Stainless) header

http://www.ultimateheaders.com/images/headers/swap-header.png

http://www.ultimateheaders.com/images/products/swap-headers/finishes.jpg

http://www.ultimateheaders.com/images/products/long-tube/long-tube-header.jpg

http://www.ultimateheaders.com/images/products/swap-headers/LS-engine-diagram.jpg

http://www.ultimateheaders.com/images/products/swap-headers/shorty-head-1.jpg

http://www.ultimateheaders.com/images/products/swap-headers/shorty-head-2.jpg

http://www.ultimateheaders.com/images/products/swap-headers/shorty-head-3.jpg

[MCB Matt]

All of the info is on their website, but we wanted to make sure you know they have a 1st gen Camaro/FB DSE Subframe specific application as well. Here are the details on those:

Patented design (U.S. Patent US D700,554 S)

Includes premium corrosion and heat-resistant ARP (Automotive Racing

Products) 12-point, 300 grade stainless steel bolts and washers
Jig fixture, TIG welded for precise quality control

Easy to install

Large (1-7/8”) header tubes made of 321 Stainless Steel

Rear dump design positions the tubes away from steering shafts and frame rails

Header tubes are mounted high and tight, makes a very compact, space efficient package

Eye catching flanges add dramatic improvement to the engine compartment

Package includes everything needed for the installation -- headers, ARP 12-point Stainless Steel bolts & washers and Mr. Gasket MLS (Multi Layer Stainless) header

http://www.ultimateheaders.com/images/products/swap-headers/shorty-head-1-LG.jpg

http://www.ultimateheaders.com/images/products/swap-headers/shorty-head-2-LG.jpg

http://www.ultimateheaders.com/images/products/swap-headers/shorty-head-3-LG.jpg

http://www.ultimateheaders.com/images/products/swap-headers/finishes.jpg

[MCB Matt]

More Details:

There is more than meets the eye to these headers and honestly, if you care about QUALITY, fitment, appearance, and a lifetime warranty... This is the only set to buy guys!

This may only be a 2 year old brand but the owner/developer of this product has been in the exhaust business for a LONG time and manufactured a well known brand, that is still is business (Sorry, not sure if I can share the name, but it's high end!)

Fitment: These headers fit so tight, they have yet to find an application they didn't fit with!

Major points:

-ALL 321 Stainless is used, they are the only header company to do this!

- The gorgeous flange used was tested to the same or better strength as 3/8 steel.

- Every set comes with Mr. Gasket Stainless gaskets and ARP 12 point hardware (Price those separate!)

- 2 styles of collector flanges available - Allows for a leak free, clean and VERY compact fit! O2 bungs are pre-installed as well for the LSx guys.

- Extremely tight bends make for the best fitment possible in a header, honestly. If you look at the published specs, you can easily see all the dimensions you need to check fitment.

2 available styles of Collector Flanges:
http://ultimateheaders.com/images/headers/Header-Block-3-Bolt-Flange-System-lightweight.png
http://ultimateheaders.com/images/headers/Header-Block-Cast-Low-Profile-Clamps.png

Tight Radius Elbows:
http://ultimateheaders.com/images/headers/tight-radius-elbow.png

Gorgeous Flanges!
http://ultimateheaders.com/images/products/cast-headers/cast-header-as-cast.jpg

http://ultimateheaders.com/images/headers/tubing.png

[fishface]

I bought the first set of long tubes through Matt for my 69 Camaro with Chassisworks frame. They are absolutely a work of art. Fitment is great . I will have to add a u-joint in steering shaft but found this to be the case in others I tried also which had far more clearance issues. Angle is perfect for the collectors with plenty of ground clearance. Wish I could post some pics but lighting in my garage not great at the moment. Anyway, my opinion of these is very high and the quality justifies the cost.

[MCB Matt]

I bought the first set of long tubes through Matt for my 69 Camaro with Chassisworks frame. They are absolutely a work of art. Fitment is great . I will have to add a u-joint in steering shaft but found this to be the case in others I tried also which had far more clearance issues. Angle is perfect for the collectors with plenty of ground clearance. Wish I could post some pics but lighting in my garage not great at the moment. Anyway, my opinion of these is very high and the quality justifies the cost.

You always get what you pay for in this business. I am happy you are pleased with your investment. These cars are a big investment for all of us, the parts we use to build them are investments too. It doesn't make sense to cut corners on something like headers! They show, they can leak, they can cause fitment issues, the finish can be crap, ect... To save a few hundred bucks! Not worth it IMO. :badidea:


Thanks for the feedback
Matt

[paulk68]

Hey Matt do these fit a LS3 in a stock 68 camaro subframe with the ridetech tru turn and DSE steering box?

[MCB Matt]

Hey Matt do these fit a LS3 in a stock 68 camaro subframe with the ridetech tru turn and DSE steering box?

Yes, they are a good fit for this. I would assume you aren't looking at long tubes? They don't sell as many long tubes as a lot of people are getting tired of them hitting the ground! I can call to see if they have verified fitment on them though.

Thanks
Matt

[Dave95z28]

Do you know if the long tubes fit the original style Speedtech subframe?

[MCB Matt]

Yes, he did say they fit the original Speedtech frame.

Thanks
Matt

[MCB Matt]

Our Holiday Special Prices are good through next Wednesday, Jan 13th at 4pm.

Let us know what you are shopping for and we will get you the best possible price with the best service as well!

Happy New Year and have a great 2016 from all of us at MCB

[MCB Matt]

We just wanted to remind everyone, today is the last day of our New Years Sales. Give us a call for the fastest way to purchase, or send an Email/PM and we can send a Paypal invoice.

Thank you very much for the business this year already!
MCB

[MCB Matt]

Happy Hump Day to all, we are half way through the week!

We have now started our Tax Return specials of the week which will run until the end of April.

If there is something specific you need, just let me know and I will get you the best sale prices.

Thanks for your business out there!
MCB

[MCB Matt]

Thank you all for the orders, we appreciate your business!

Let us know if you need anything you don't see on our current website, the new one will have a LOT more!

MCB

[MCB Matt]

Thank you all very much for the business. It is crazy busy here, we have quite a few sales running now so let us know what you need and we will get you hooked up.

MCB

[MCB Matt]

Happy Monday to all!

When only the best look/finish will do, when you want the best fitment... Ultimate Headers are the way to go! We have received very good feedback on the sets we have shipped, most are even more impressed once they actually get their set and see them in person! They are truly a TOP NOTCH header and all dimensions are posted, making it much easier to gauge fitment in your project.

We would like to thank everyone for the response on our current Tax Time Sale! This covers just about everything we sell, give us a call, PM or Email for your sale price.

MCB

[MCB Matt]

This week is the last week of the Tax Time Specials. Let us know what you need and we will get you the best price!

Thank you all VERY much for the business on this sale, we truly appreciate it.
MCB

[MCB Matt]

Our 15 year anniversary is just a month away! It has been a long and interesting journey!!

We would like to offer up some of the best pricing we can for you guys! We have made many friends and regular customers over the years here. We truly appreciate the business and friendships.

Let us know what you need, we surprise a LOT of customers that had no idea we carried a particular brand they needed. It never hurts to ask! If it's a brand we don't offer for a particular reason, we will be honest about why.

We have earned the trust of so many on this forum, we have never ripped anyone off, played cut throat games with some of the "interesting" vendors here, some have come and GONE..

Thanks from all of us at MCB Parts

[MCB Matt]

Join us in our 15 year anniversary sale and save some cash!

Everything is on sale and as always, we are here to answer your questions! No waiting to hear back, no voicemail's, no cell phones... We are a full time business processing hundreds of orders each day.

Feel free to PM, Email, or call, we enjoy talking to our customers!

Thanks
Matt

[MCB Matt]

Thank you all for the business on our anniversary sale. There is still another week left to jump in on this deal. Every brand we offer is covered in this sale, so basically anything you need for any build!

MCB

[warhawkchevelle]

Got a little special project.

Do you sell any headers that fit my 66 chevelle:
Blown LS7
Low mount retrofit engineblock.
TKO600.
DSE suspension.

But, here´s the kicker.
I want 2" primaries with 3,5" collector.

Anything you can help me with?

Thanks
Patrik Lissjos
Sweden

[MCB Matt]

Got a little special project.

Do you sell any headers that fit my 66 chevelle:
Blown LS7
Low mount retrofit engineblock.
TKO600.
DSE suspension.

But, here´s the kicker.
I want 2" primaries with 3,5" collector.

Anything you can help me with?

Thanks
Patrik Lissjos
Sweden

The closest I have to that is 1 7/8" Primaries and 3" collectors. You are probably looking at a custom set to get those specs honestly.

Thanks
Matt