67 camaro kick panels roddoors

[tekin]

has anyone used these kick panels from RODDOORS, he says they are made of abs, but I am just curious of fit and how do you seal the speakers from behind and also seal the vent hole when you swap the panels.
Any issues for e brake???

http://www.camaros.net/forums/showthread.php?t=369281

[bulldog19]

Check these out much nicer unit and you can use stock e-brake pedal.
http://screaminperformance.com/camaro_kick_panels.htm
I used them in my 68 and very high quality.

[tekin]

well prob with those are the speakers are so far up the dash and there is no provision for a tweeter and they are spendy

[tekin]

well prob with those are the speakers are so far up the dash and there is no provision for a tweeter and they are spendy

[130fe]

I have the Screaming Performance ones, they do have a tweeter provision. I thought the Roddoors company went out of business a couple of years ago.

[214Chevy]

I have the Screaming Performance ones, they do have a tweeter provision. I thought the Roddoors company went out of business a couple of years ago.

They did...I pulled the following quote from the website.. I bought some of their door panel arm rests years ago and I was satisfied with them.

"Dear friends,

thank you for your loyal support over the years. we just could not hold on long enough to get thru this rough stretch of road. We are out of business effective 11/04/2009. someone will purchase some of the molds and continue to produce a few of the many products that we use to make. Who that is and when they will be available is unknown even to us at this time.

Even when you know your in the same boat as many others (without a paddle, a rudder, a sail or a bucket) it still is not any easier."

[tekin]

makes sense now cause this new guy is selling the product but just heard that maybe his material is really thin has anyone tried it

[hifi875]

I've got a set for a69 covered in black ultra suede if your interested

[tekin]

pm sent

[bulldog19]

I purchased a set of the roddoors and sent them back. They were thin plastic and I also felt the crowded the pedal area the way the speaker stuck out.

[tekin]

was that really recent or long time ago

[RECOVERY ROOM]

A customer brought some of the Rod doors stuff with his car, We wern't that happy with them so we made our own

[Bad Bowtie]

The Screamin Performance kick panels are a little pricey but the quality, fit and finish is very good. I used a set in 67 Camaro and had no issues what so ever. Mine had a provision for tweeters too.

BB

[bulldog19]

The set I had was when they were still in business for themselves.

[will69camaro]

What about the shop llc kick panels?

http://the-shop-llc.myshopify.com/products/1969-camaro-kick-panels?variant=1192816004

[tekin]

Hey that is a good point what about just chopping the stock door panel and putting speakers there but I don't wanna chop up the stock panels damn

[LateralJeaz]

What about the shop llc kick panels?

http://the-shop-llc.myshopify.com/products/1969-camaro-kick-panels?variant=1192816004

X2...any know if these guys still around with In stock stuff and/or doing things in a timely fashion?

[TheShopLLC.com]

X2...any know if these guys still around with In stock stuff and/or doing things in a timely fashion?

Sent you a PM back on you inquiry, we have plenty of these bad boys in stock. Let us know if we can help you out with your projects. Thanks a ton.

http://the-shop-llc.myshopify.com/products/1969-camaro-kick-panels?variant=1192816004

[LateralJeaz]

Sent you a PM back on you inquiry, we have plenty of these bad boys in stock. Let us know if we can help you out with your projects. Thanks a ton.

http://the-shop-llc.myshopify.com/products/1969-camaro-kick-panels?variant=1192816004

Indeed you did! Check your box and let's get it going:thumbsup: :thumbsup: