Ultimate Headers Announces New Long Tube Headers

[camcojb]

For 1st and 2nd Gen Camaros with the LS engines.

http://lateral-g.net/pics/ultimate_headers.jpg (http://ultimateheaders.com/press-releases/20150416-long-tube/20150416-long-tube.html)

[andrewb70]

So the big question is what swap mounts were these designed for?

There seems to be quite a bit of variance in engine placement with the multitude of mounts that are available for LS swaps. This of course can cause all sorts of problems with header clearance.

They sure look nice though.

Andrew

[waynieZ]

That's the "most important question" Andrew

[pist0lpete]

321 Stainless sounds very nice!

[paulk68]

So the big question is what swap mounts were these designed for?

There seems to be quite a bit of variance in engine placement with the multitude of mounts that are available for LS swaps. This of course can cause all sorts of problems with header clearance.

They sure look nice though.

Andrew

Agree, I would be happy to try them with the hooker LS mounts and ride tech Tru Turn system if you need a guinea pig

[camcojb]

So the big question is what swap mounts were these designed for?

There seems to be quite a bit of variance in engine placement with the multitude of mounts that are available for LS swaps. This of course can cause all sorts of problems with header clearance.

They sure look nice though.

Andrew
I emailed them for an answer.

[camcojb]

Spoke with Jim, these particular headers are fit with the DSE subframes and mounts. There are going to be fitments for stock subframes and at that point they'll tell us what mounts they used for fitment.

[andrewb70]

They should include that important information in their flyer.

Andrew

[Dave95z28]

Beautiful headers. Wish they fit Speedtech's subframe. Would really like a 1 7/8" header versus the 1 3/4" or 2" options they have.

Dave

[Ultimate Headers]

Good afternoon guys!
Here are a few answers to the questions you had on our new LS Long Tube Headers.

The first set was installed on a 1st Gen F-body with a stock sub-frame/stock steering box and a DSE Set Back motor mounts. This install was done at Sled Alley in MI.

We also have installed these in a 2nd Gen, w/DSE Sub-frame and motor mounts at Dutchboy's! Our latest install was a 64-72 A-Body with stock frame and steering. We will confirm the motor mounts...

Dave95z28, we are working with Speedtech and will have headers for you in the coming months!

As we add/confirm more installations, we will be sharing this with all you!

If you have any questions, you can contact us at 440-234-9600 or [email protected]

Thanks,
Jim Browning
Ultimate Headers