2nd gen mirrors

[RdHuggr68]

I bought a pair of 2nd gen mirrors for my 68 and don't want to use the remote control cable for the drivers mirror. Anybody have any ideas if you can remove it and hopefully stiffen up the mirror so you can adjust it by hand. Not sure yu have to do anything but I thought maybe one of you would have done or seen it done before. Thank You
Kevin

[tumper93]

I didn't want to cut the trim on the door panel for mine so I zip tied the control inside the door away from the window and regulator. This way I keep a tight mirror

[RdHuggr68]

I didn't want to cut the trim on the door panel for mine so I zip tied the control inside the door away from the window and regulator. This way I keep a tight mirror

Thanks for the info!

[RdHuggr68]

Okay, I know a lot of you guys use the second gen mirrors on their 1st gens. Are you all using the remote cable? :EmoteClueless:

[tubbed69]

I was told do not cut the cable off the mirror will flop around,I tied mine off inside the door.