Wegner Built LS7 Dry Sump Engine

[garickman]

Item Location (City/State):Tracy, California

Price:$27,500.00

Description:

Well, I was hoping that it didn’t get to this point but some personal and family issues have come up and I will be selling this engine.

http://i1126.photobucket.com/albums/l609/garickman/WEGNER030.jpg (http://s1126.photobucket.com/user/garickman/media/WEGNER030.jpg.html)

I’m not going into great detail because if you are a serious potential buyer, I am sure you will want to contact me by phone or in person.

I can tell you this engine was built with extremely high end parts and no expense was spared. It was built by Wegner Motorsports who is one of the best LS engine builders in the country. The engine has had the initial break in and was dyno tested at Wegner Motorsports producing 710HP and 653 pounds of torque. Casey Wegner said the throttle response to the Harrop ITB’s was insane. It was also built with some street manners in mind and should get 17-20 MPG.

Here is a link to the video of the dyno test at Wegner Motorsports.

https://www.youtube.com/watch?v=JWnl9Cc4tqc

Here is a list of all the parts used on this engine build at a cost of more than $33,000.00. I will also provide the buyer with an invoice of almost $4,500 for the work and dyno test performed at Wegner Motorsports. The total cost of this engine is upwards of $37,500.00

ENGINE

RHS LS ALUMINUM RACE BLOCK $4,937.00
9.750” TALL DECK, 4.165” BORE
PART #54900
www.racingheadservice.com

RHS PRO ELITE LS7 CYLINDER HEADS $3,680.00
PART #54501-06STI
www.racingheadservice.com

RHS RACE BLOCK INTAKE SPACER KIT $254.00
PART #549109
www.racingheadservice.com

RHS RACE BLOCK PISTON OILER KIT $734.00
PART #549120
www.racingheadservice.com

RHS TALL DECK RACE BLOCK TIMING COVER $250.00
PART #5496
www.racingheadservice.com

RHS HEAD GASKET SET $233.00
PART #549402-SET
www.rasingheadservice.com

COMP CAMS SHAFT ROCKER SYSTEM $1,693.00
PART #1525
www.compcams.com

COMP CAMS SHORT TRAVEL RACE LIFTERS $548.00
PART #15956-16
www.compcams.com

COMP CAMS ADJUSTABLE TIMING SET $267.00
PART #3173KT
www.compperformancegroupstores.com

COMP CAMS CUSTOM GRIND CAM SHAFT $397.00
PART #54-000-11
www.compcams.com

WEGNER MOTORSPORTS LS FRONT DRIVE, DIAMOND CUT $2,725.00
FINISH, UPGRADED 225 AMP ALTERNATOR
PART #WAK033
www.wegnerautomotive.com

CALLIES DRAGON SLAYER CRANKSHAFT WITH 24X BILLET $1,670.00
ONE PIECE RELUCTOR
PART #APU31V-DS
www.callies.com

CALLIES ULTRA I BEAM CONNECTING RODS $1,550.00
PART #U17171
www.callies.com

HARROP HURRICANE ITB INTAKE MANIFOLD $4,950.00
PART #LS7 HURRICANE
www.harrop.com.au

HARROP HURRICANE TRUMPET FLANGE $55.00
PART #99-FLG11432
www.harrop.com.au

ARP HEAD STUD KIT FOR LSX 6 BOLT HEADS $520.00
PART #234-4319
www.arp-bolts.com

ARP MOTOR MOUNT BOLTS, 12 POINT STAINLESS STEEL $23.00
PART #434-3101
www.arp-bolts.com

ARP TIMING COVER BOLT KIT, 12 POINT STAINLESS STEEL $29.00
PART #434-1502
www.arp-bolts.com

ARP INTAKE MANIFOLD BOLT KIT, 12 POINT STAINLESS STEEL $36.00
PART #434-2101
www.arp-bolts.com

ARP HEADER BOLTS, 12 POINT STAINLESS STEEL $47.00
PART #434-1202
www.arp-bolts.com

ARP REAR MOTOR COVER BOLTS, 12 POINT STAINLESS $30.00
PART #434-1504
www.arp-bolts.com

ARP OIL PAN BOLTS $57.00
PART #434-6902
www.arp-bolts.com

ARP TIMING COVER BOLTS $30.00
PART #434-1502
www.arp-bolts.com

ARP VALVE COVER BOLTS $51.00
PART #400-7530
www.arp-bolts.com

ARP WATER PUMP BOLTS $37.00
PART #434-3202
www.arp-bolts.com

ARP HARMONIC BALANCER BOLT KIT $32.00
PART #234-2503
www.arp-bolts.com

ARP VALLEY COVER BOLTS $35.00
PART #434-8002
www.arp-bolts.com

ARP THERMOSTAT HOUSING BOLTS $7.00
PART #434-7401
www.arp-bolts.com

ARP CAM RETAINER BOLT KIT $8.00
PART #134-1002
www.arp-bolts.com

ARP CAM SPROCKET BOLT KIT $7.00
PART #134-1003

VINTAGE AIR STAINLESS HEATER HOSE ADAPTER $22.00
3/8” NPT TO #10 O-RING
PART #36032-MPA
www.vintageair.com

VINTAGE AIR STAINLESS HEATER HOSE ADAPTER $22.00
1/2” NPT TO # 10 O-RING
PART #36033-MPA
www.vintageair.com

PETERSON FLUID SYSTEMS LS7 DRY SUMP OIL TANK $672.00
PART #08-0025-ATS
www.petersonfluidsys.com

PETERSON FLUID SYSTEMS REMOTE OIL FILTER/PRIMER $412.00
PART #09-1501
www.petersonfluidsys.com

PETERSON FLUID SYSTEMS MOUNTING BRACKET $52.00
PART #09-1594
www.petersonfluidsys.com

PETERSON FLUID SYSTEMS LS7 DRY SUMP BREATHER CAN $264.00
PART #08-400-ATS
www.petersonfluidsys.com

LS STEAM LINE KIT $140.00
PART #78-10000
www.crracing.com

GENERAL MOTORS CRANKSHAFT SENSOR 24X $70.00
PART #12560228

PROTHANE MOTOR MOUNTS $59.00
PART #7-504-BL
www.prothane.com

AN PORT ADAPTER -12AN O-RING TO -10AN STRAIGHT $20.00
PART #AT985011ERL
www.earls.co.uk

GRANATELLI MOTORSPORTS LS7 80K COIL KIT $645.00
PART #28-0513CP
www.granatellimotorsports.com

TCI PERMANENT MAGNET RACING STARTER $282.00
PART #351110
www.tciauto.com

DEATSCHWERKS BOSCH EV14 60mm FUEL INJECTORS $489.00
PART #18U-00-0060-8
www.deatschwerks.com

DAILEY ENGINEERING 3 STAGE OIL PUMP $1,315.00
PART #04-99-2371-2
www.daileyengineering.com

DAILEY ENGINEERING LS 3 STAGE OIL PAN $1,500.00
PART #20-02-0666-ASSY
www.daileyengineering.com

DAILEY ENGINEERING PULLEY ASSEMBLY $100.00
PART #HP-31-115-.500
www.daileyengineering.com

DAILEY ENGINEERING BELT $30.00
PART #624-8MM-20
www.daileyengineering.com

DIAMOND RACING CUSTOM PISTONS $1,390.00
www.diamondracing.net

KATECH CARBON FIBER VALVE COVERS $750.00
PART #KAT-A5032
www.katechengines.com

GM LS7 REAR MAIN SEAL $20.00
PART #89018162

COMETIC LS OIL PAN GASKET $55.00
PART #202-C5173
www.cometic.com


TOTAL PARTS $33,201.00

TOTAL LABOR $4,200.00

TOTAL BUILD $37,401.00

[Che70velle]

This is a DEAL fellers!

Marcus...it's even your favorite color!

Greg, I hate you have to sell, but it sure is pretty.

[carbuff]

That sure would make a nice drop-in replacement for TOW. Best of luck with the sale!

[Vince@Meanstreets]

That sure would make a nice drop-in replacement for TOW. Best of luck with the sale!

its the right color too :thumbsup:

[Flash68]

I see the bore, but I don't see the stroke... So what is the CID?

[garickman]

I see the bore, but I don't see the stroke... So what is the CID?

It's a 4.125 stroke making the engine 450 cubic inches. With the tall deck, I could have went with a longer stroke making the engine 502 cubic inches, but after lengthy talks with both Thomson Automotive and Wegner Motorsports it was decided to go with the 4.125 stroke. The reasoning for this was to make the engine more street friendly with better fuel mileage and a much longer life.

Here is what Ron Sutton said about it,

"These numbers are nice ...

710 HP @ 6400
651.5 FT LBS @ 5100

But the thing that is bad ass is the flat torque curve and hp like a rheostat. This thing will be great to drive. That cam you posted is the key to this wide power band."

[71RS/SS396]

That's a smokin deal, I just built a nearly identical engine and have more into mine than the asking price for this one. GLWS!

[214Chevy]

http://i1126.photobucket.com/albums/l609/garickman/WEGNER030.jpg (http://s1126.photobucket.com/user/garickman/media/WEGNER030.jpg.html)


This is a DEAL fellers!

Marcus...it's even your favorite color!

Greg, I hate you have to sell, but it sure is pretty.

its the right color too :thumbsup:

Yep, y'all know I started drooling when I saw that blue. Looks to be my exact paint code too.

[Rick D]

Yep, y'all know I started drooling when I saw that blue. Looks to be my exact paint code too.

Sooooo Marcus, why not just buy this one and be done??:hello: :poke: :underchair:

[Che70velle]

Sooooo Marcus, why not just buy this one and be done??:hello: :poke: :underchair:

Yeah! I can already see this with that gold plated supercharger sitting on it that your hiding...
All kidding aside Marcus, this is a DEAL!!!!!!

[Rick D]

Greg is the bird project going forward?? I hope so as it will be sooo cool when's it's done. Let me know if I can do anything to help? :hello:

[tmadden]

OMG dude!!! That is a insane engine!!! Come on lotto ticket

[Bob Waters]

I cannot wait to see that sitting in my 70 Camaro :) :whenitsdone:

[Vince@Meanstreets]

I cannot wait to see that sitting in my 70 Camaro :) :whenitsdone:

please be sure to start a build thread. I hear you have "the Monster"

[Flash68]

So is this engine sold?

[garickman]

So is this engine sold?

It's probably safe to say you can close this thread.

[Flash68]

It's probably safe to say you can close this thread.

10-4