Headers that fit with ridetech tru turn on 1969 Camaro

[SkeWest]

Hi. I've got a 69 Camaro with a sbc and I'm having issues finding headers that will fit with the tru turn setup. I've done some searching and found some that say the Dynatech #740-21310 will clear but the thread was a couple of years old so I thought I'd see if anyone had any additional info. I called Ridetech and they told me that people have had luck with Dynatech and Summit, but they couldn't give me any specific model numbers.

My setup is sbc with straight plugs, ridetech tubular a arms, muscle bar, and coil overs. M22, vintage air front runner, compact starter, and stock steering box.

Thanks for any help

[RBuhr69]

I have dynatech headers and slide in place without any issues with stock steering box. Just have to get the car up high enough to clear the ground cause they have t ogo in at an angle fromt the bottom......My plugs are angled though, so not sure about straight plug heads.

[SkeWest]

Thanks. What model of dynatechs are you using?

[RBuhr69]

these are the ones I have..
1 5/8 - 1 3/4
http://www.summitracing.com/parts/DTC-740-23210/


Others have said the yused the bigger tube one..
1 3/4-1 7/8 stepped headers. Part # 740-21310

[SkeWest]

Thanks a lot!

[RBuhr69]

Here is a photo of them installed and the clearance by the pitman arm and drag link..This is the area to be concerned with.

[SkeWest]

Perfect! Just ordered mine. Thanks again.