srh3trinity
02-25-2014, 06:49 PM
Item Location (City/State): Birmingham, AL
Price: See below
Description:Cleaning out the garage. All parts are in Birmingham, AL
I have a set of used C6 Z51 calipers and abutments along with a (one) front rotor and two rear rotors. I sent one of the front rotors to the machine shop to have a hub made and the guy I knew there quit. I never got it back. The powdercoat is old and needs to be cleaned off and re-done. I bought some powdercoating remover from Eastwood, but never tried it. The rotors are heavy, so shipping is pricey. I would go $550 shipped.
http://i838.photobucket.com/albums/zz302/srh3trinity/20140225_201019_zpsp7jmxz2h.jpg (http://s838.photobucket.com/user/srh3trinity/media/20140225_201019_zpsp7jmxz2h.jpg.html)
http://i838.photobucket.com/albums/zz302/srh3trinity/20140225_201030_zps7ttljqfa.jpg (http://s838.photobucket.com/user/srh3trinity/media/20140225_201030_zps7ttljqfa.jpg.html)
http://i838.photobucket.com/albums/zz302/srh3trinity/20140225_201037_zps137rzdin.jpg (http://s838.photobucket.com/user/srh3trinity/media/20140225_201037_zps137rzdin.jpg.html)
http://i838.photobucket.com/albums/zz302/srh3trinity/20140225_201133_zps0j7jxn7t.jpg (http://s838.photobucket.com/user/srh3trinity/media/20140225_201133_zps0j7jxn7t.jpg.html)
http://i838.photobucket.com/albums/zz302/srh3trinity/20140225_201139_zpszwxmmbcb.jpg (http://s838.photobucket.com/user/srh3trinity/media/20140225_201139_zpszwxmmbcb.jpg.html)
http://i838.photobucket.com/albums/zz302/srh3trinity/20140225_201146_zpskc7hojik.jpg (http://s838.photobucket.com/user/srh3trinity/media/20140225_201146_zpskc7hojik.jpg.html)
I have two sets of ARP wheel studs for late model GM. Part number 100-7708. I bought the longer ones. 12mm x 1.50 with a 2.5 inch length. I bought a set of aftermarket C6 hubs and the knurl on these is wrong for the aftermarket hubs, but right for the OEM hubs. I will take a loss at $25 shipped, but I can't use them.
http://i838.photobucket.com/albums/zz302/srh3trinity/20140225_110300_zpswvri0dgg.jpg (http://s838.photobucket.com/user/srh3trinity/media/20140225_110300_zpswvri0dgg.jpg.html)
http://i838.photobucket.com/albums/zz302/srh3trinity/20140225_110237_zpsdar9u2in.jpg (http://s838.photobucket.com/user/srh3trinity/media/20140225_110237_zpsdar9u2in.jpg.html)
I have two take off OEM C6 front hubs. Unknown mileage. The wire and weatherpak connector is in good shape. The hubs don't have any play in them and they have the apropriate amount of rolling resistance in them. These could be used for mockup or could be cleaned up for anybody swapping C5/C6 front suspension parts. I would do $40 shipped for them.
http://i838.photobucket.com/albums/zz302/srh3trinity/20140225_201315_zpsn1wvzmwi.jpg (http://s838.photobucket.com/user/srh3trinity/media/20140225_201315_zpsn1wvzmwi.jpg.html)
Price: See below
Description:Cleaning out the garage. All parts are in Birmingham, AL
I have a set of used C6 Z51 calipers and abutments along with a (one) front rotor and two rear rotors. I sent one of the front rotors to the machine shop to have a hub made and the guy I knew there quit. I never got it back. The powdercoat is old and needs to be cleaned off and re-done. I bought some powdercoating remover from Eastwood, but never tried it. The rotors are heavy, so shipping is pricey. I would go $550 shipped.
http://i838.photobucket.com/albums/zz302/srh3trinity/20140225_201019_zpsp7jmxz2h.jpg (http://s838.photobucket.com/user/srh3trinity/media/20140225_201019_zpsp7jmxz2h.jpg.html)
http://i838.photobucket.com/albums/zz302/srh3trinity/20140225_201030_zps7ttljqfa.jpg (http://s838.photobucket.com/user/srh3trinity/media/20140225_201030_zps7ttljqfa.jpg.html)
http://i838.photobucket.com/albums/zz302/srh3trinity/20140225_201037_zps137rzdin.jpg (http://s838.photobucket.com/user/srh3trinity/media/20140225_201037_zps137rzdin.jpg.html)
http://i838.photobucket.com/albums/zz302/srh3trinity/20140225_201133_zps0j7jxn7t.jpg (http://s838.photobucket.com/user/srh3trinity/media/20140225_201133_zps0j7jxn7t.jpg.html)
http://i838.photobucket.com/albums/zz302/srh3trinity/20140225_201139_zpszwxmmbcb.jpg (http://s838.photobucket.com/user/srh3trinity/media/20140225_201139_zpszwxmmbcb.jpg.html)
http://i838.photobucket.com/albums/zz302/srh3trinity/20140225_201146_zpskc7hojik.jpg (http://s838.photobucket.com/user/srh3trinity/media/20140225_201146_zpskc7hojik.jpg.html)
I have two sets of ARP wheel studs for late model GM. Part number 100-7708. I bought the longer ones. 12mm x 1.50 with a 2.5 inch length. I bought a set of aftermarket C6 hubs and the knurl on these is wrong for the aftermarket hubs, but right for the OEM hubs. I will take a loss at $25 shipped, but I can't use them.
http://i838.photobucket.com/albums/zz302/srh3trinity/20140225_110300_zpswvri0dgg.jpg (http://s838.photobucket.com/user/srh3trinity/media/20140225_110300_zpswvri0dgg.jpg.html)
http://i838.photobucket.com/albums/zz302/srh3trinity/20140225_110237_zpsdar9u2in.jpg (http://s838.photobucket.com/user/srh3trinity/media/20140225_110237_zpsdar9u2in.jpg.html)
I have two take off OEM C6 front hubs. Unknown mileage. The wire and weatherpak connector is in good shape. The hubs don't have any play in them and they have the apropriate amount of rolling resistance in them. These could be used for mockup or could be cleaned up for anybody swapping C5/C6 front suspension parts. I would do $40 shipped for them.
http://i838.photobucket.com/albums/zz302/srh3trinity/20140225_201315_zpsn1wvzmwi.jpg (http://s838.photobucket.com/user/srh3trinity/media/20140225_201315_zpsn1wvzmwi.jpg.html)