Where to get stainless AN tube fitting?

[Flash68]

Looking for some of these but in stainless AN16 size and cannot locate. Anyone point me in the right direction?

https://www.pegasusautoracing.com/productselection.asp?Product=3259

[dontlifttoshift]

http://performance.phenixindustries.com/specialty.html

About mid page are all the SS weld bungs.

[Flash68]

http://performance.phenixindustries.com/specialty.html

About mid page are all the SS weld bungs.

Knew someone would hook me up here. Thanks Donny! :thumbsup:

[dontlifttoshift]

Tell Brett to sign up and be a dealer. Their stuff is awesome, very competitive price wise and made in USA. Most of their hose ends are available in a bunch of different finishes as well.

[coolwelder62]

www.Mcmaster-Carr.com

[Solid LT1]

Phenix guys are great but, Parker Hydraulics or McMaster Carr
JIC hydraulic fittings are all 37 degree flare. I use JIC steel stuff on high pressure power steering and A/C lines.

[Flash68]

http://performance.phenixindustries.com/specialty.html

About mid page are all the SS weld bungs.

That ain't what we need. Owner said that photo (for stainless) is not accurate and they do not make that part in stainless.

Tell Brett to sign up and be a dealer. Their stuff is awesome, very competitive price wise and made in USA. Most of their hose ends are available in a bunch of different finishes as well.

Brett is going to be a dealer I think after we both talked to Bill. Nice guy and something good came out of that so that's cool.

I did finally find who makes this part for the Nascar guys who don't make it in house and it's Brown & Miller. Here is what they make and they are $32 for 16AN. Problem solved.

http://i236.photobucket.com/albums/ff245/flash68/IMG_20140205_131419_244_zps970b9b9b.jpg (http://s236.photobucket.com/user/flash68/media/IMG_20140205_131419_244_zps970b9b9b.jpg.html)

[GregWeld]

A real man would have just machined a couple.....


Good thing I sing like a girl.



HAHAHAHAHAHAHAHAHAHA


$32 a pop... I hope you need 20 of them.... that will slow the progress even further. Gives me more seat time before you show up and embarrass me.

[Flash68]

A real man would have just machined a couple.....


Good thing I sing like a girl.



HAHAHAHAHAHAHAHAHAHA


$32 a pop... I hope you need 20 of them.... that will slow the progress even further. Gives me more seat time before you show up and embarrass me.

We were talking about getting them made before we found them.... didn't get a price... and I was singing like a girl waiting for that number too. :D

Good thing I only need 6..... Rob needs 4.... so that's our huge bulk order of 10. Could be worse.

[dontlifttoshift]

Well, shoot! It looked like what you needed. What's different in the actual product compared to the pic?

[GregWeld]

Well, shoot! It looked like what you needed. What's different in the actual product compared to the pic?



NEVER MIND -- Went back to original post and DOH!!


Looks to me like a weld on fitting.....


I used those (in 8's and 10's and 6's) for making a bunch of SS A/C hard lines --- big mistake.... they cooled the headers but didn't do much for the interior of the car. Still was fun to do -- and welding tiny stainless like that was fun. So if nothing else I learned some stuff.

[Damn True]

Ya might look at aircraft spruce as well. Or an aircraft supply store sometimes they are cheaper....sometimes not.

[Flash68]

Well, shoot! It looked like what you needed. What's different in the actual product compared to the pic?

I believe the one they have in SS has a flat back with no insert or shoulder for tubing. I can't keep all of the places I talked to and emailed straight at this point, only know that we found what we need!

Sometimes it's just the thrill of the hunt I guess. Wasn't too bad and coulda certainly been worse.

Thanks all for recommendations.

[Ron in SoCal]

I believe the one they have in SS has a flat back with no insert or shoulder for tubing. I can't keep all of the places I talked to and emailed straight at this point, only know that we found what we need!

Sometimes it's just the thrill of the hunt I guess. Wasn't too bad and coulda certainly been worse.

Thanks all for recommendations.

Shocking.

[Flash68]

Shocking.

Ron, how bout putting a running car in your avatar? It's the 2nd decade of the 21st century after all. It's pretty much a revelation.

:action-smiley-027:

[Ron in SoCal]

That all you got? My car moves under its own power. You? :lol:

:cheers:

P.S. I like my avatar.

[Flash68]

That all you got? My car moves under its own power. You? :lol:

:cheers:

P.S. I like my avatar.

I don't go for the jugular right out the gate. :twak:

I'll give you a little leeway.... I remember the first time I had a running Camaro too :confused59: .... ahhhh.... I'm happy for you. :D Can't wait for the feeling again.

[Ron in SoCal]

I don't go for the jugular right out the gate. :twak: .

Sure you don't :D

I had a running Camaro too :confused59: .... ahhhh.... I'm happy for you. :D Can't wait for the feeling again.

Me to Brother :cheers: