WTB 6.0 bare block STD bore

[sshep71]

I am looking for a bare 6.0 block with main caps. STD bore or one that will clean up with a hone. I am in the San Diego area. Let me know what you have! If the price is right I will pay to have it shipped. AL or Cast will work.

[sshep71]

Bump!

[214Chevy]

I have an iron one. It has already been magnafluxed....just hone, deck and build it. PM me your cell. I can get you some pics tomorow.

[clill]

I have a aluminum 6.0 LS block.

[sshep71]

CLILL I sent you a PM about your Al 6.0

[sshep71]

Still looking!

[sshep71]

to the top, still looking.

ALSO looking for 6.0 pistons for a stock 3.622" crank

[mitch_04]

Are you looking for original pistons for a budget build, or aftermarket for a custom?

I have a set of rods and pistons from a '00 LQ4 and a set of rods and pistons from an unknown year LS2. I had planned on swapping the LS2 rods in place of the LQ4 rods since they are much beefier and better for boost.

[sshep71]

Sorry about that, I am looking for aftermarket pistons. 4.01"- 4.06" bore. Dish preferred, but would consider flat tops.