69 Camaro Wheels help

[snappytravis]

Looking for a little advice on wheels, I have a 69 camaro with mini tubs and morrison rear clip. I have a new set of kdws, 275 35 18, and 335 30 18. I have a axle flange width of 55" with 14.5 inches from outer wheel lip to inner tub. I also am running 14 inch wilwood on front, also morrison clip. I have seen a few running vette style wheels with spacers? I am not to thrilled about the spacer setup although it must work ok. I like the zr1 style wheels. I would like advice on running 18s on the front and 19s on the rear? or do I keep the tires I have and run 18s all the way around, Like 18/9 front and 18/11 or 12 rear? I would rather not spend 3g on wheels but may be the only choice.

[John510]

3g for wheels is actually a really good price for those sizes you want.

[Apogee]

Given the level of your build, I would think new custom wheels would be a given. What's the opportunity cost to not use the tires you have now? I would think an 18x9 or 9.5 up front and an 18x12 out back would work well for your application with BS's for your chassis.

Tobin
KORE3

[snappytravis]

I have come to the realization that I will have to have custom wheels made, You guys are right by telling me not to (be a tightass). I think I may go with rushforth. Have contacted them a few times and they seem to be straight shooters. At this point in my build I have so much time and money in it might as well finish it up right.
Thanks for the advice:G-Dub:

[DEIGuy38]

Save a little longer and get what you really want. It took me 5 yrs to decide on wheels and when Forgeline had their black friday sale I finally pulled the trigger. Wheels and stance can make or break a car. If you don't do it right the 1st time you will always wish you did

[Vince@Meanstreets]

I have come to the realization that I will have to have custom wheels made, You guys are right by telling me not to (be a tightass). I think I may go with rushforth. Have contacted them a few times and they seem to be straight shooters. At this point in my build I have so much time and money in it might as well finish it up right.
Thanks for the advice:G-Dub:

I have dealt with Jason a few times in the past and he is great to work with. Put it this way. You not gonna get the old lady a $4000 top end, put her in an $800 dress and have her where Nike's right? :poke:

[snappytravis]

I have dealt with Jason a few times in the past and he is great to work with. Put it this way. You not gonna get the old lady a $4000 top end, put her in an $800 dress and have her where Nike's right? :poke:

Yep your right Vince, titties and wheels, reminds me of the saying if it has tits or tires your gonna have problems, I don't think If she had a $4,000 top end anyone would look at her shoes, lol:lmao:

[youthpastor]

We are building a 69 with AME stuff and 18's and 19's are the ticket in my opinion.

335 on the rear. Spend the money- wheels and stance!

Jason is a stand-up guy and his wheels are manufactured now with the best quality I have seen from him. Trust me I think I am over 10 sets now. He will steer you right on the finishes and style.

[cjfirstgen]

Just installed Forgeline ZX3's myself. 18x10, 18x12. 265/35 and 335/30 tires. Could have went with 275 but would have to raise the coil overs to make work and would not have had the stance I wanted. Have a Chassisworks pro G and DSE quadralink mini tubbed.

Like they say it's only :G-Dub:

http://i305.photobucket.com/albums/nn232/cjfar_2008/IMG_0333_zps60e75250.jpg

http://i305.photobucket.com/albums/nn232/cjfar_2008/IMG_0334_zps2cc8953d.jpg

[snappytravis]

We are building a 69 with AME stuff and 18's and 19's are the ticket in my opinion.

335 on the rear. Spend the money- wheels and stance!

Jason is a stand-up guy and his wheels are manufactured now with the best quality I have seen from him. Trust me I think I am over 10 sets now. He will steer you right on the finishes and style.

Is that what your running on the red chevelle, that was one on my list to see at the sema show, I finally saw it the last day and about 30 miles walking later in the far end of the building, That is a sweet car.

[snappytravis]

Just installed Forgeline ZX3's myself. 18x10, 18x12. 265/35 and 335/30 tires. Could have went with 275 but would have to raise the coil overs to make work and would not have had the stance I wanted. Have a Chassisworks pro G and DSE quadralink mini tubbed.

Like they say it's only :G-Dub:

http://i305.photobucket.com/albums/nn232/cjfar_2008/IMG_0333_zps60e75250.jpg

http://i305.photobucket.com/albums/nn232/cjfar_2008/IMG_0334_zps2cc8953d.jpg

thanks for the pictures, car is sweeeeet! wheels look awesome. money,money,money

[32deucecoupe]

And the stance is perfect, love the color combination.

[snappytravis]

Just installed Forgeline ZX3's myself. 18x10, 18x12. 265/35 and 335/30 tires. Could have went with 275 but would have to raise the coil overs to make work and would not have had the stance I wanted. Have a Chassisworks pro G and DSE quadralink mini tubbed.

Like they say it's only :G-Dub:

http://i305.photobucket.com/albums/nn232/cjfar_2008/IMG_0333_zps60e75250.jpg

http://i305.photobucket.com/albums/nn232/cjfar_2008/IMG_0334_zps2cc8953d.jpg

Those wheels look sweet! thanks for sharing the pictures, I have checked them out as well, I think I will get some other items squared away first then start looking at wheels again in a few months. Thanks again

[patoke]

Just installed Forgeline ZX3's myself. 18x10, 18x12. 265/35 and 335/30 tires. Could have went with 275 but would have to raise the coil overs to make work and would not have had the stance I wanted. Have a Chassisworks pro G and DSE quadralink mini tubbed.

Like they say it's only :G-Dub:

http://i305.photobucket.com/albums/nn232/cjfar_2008/IMG_0333_zps60e75250.jpg

http://i305.photobucket.com/albums/nn232/cjfar_2008/IMG_0334_zps2cc8953d.jpg

Can you tell me what the backspacing is on the front and rear? Car looks great!!

[32deucecoupe]

You would also need to know the Rearend width to really calculate the rear bs as it applies to a specific application.

[6D9 Matt]

OMG that Camaro is beautiful.

:thumbsup:

[irishlsxer]

Just installed Forgeline ZX3's myself. 18x10, 18x12. 265/35 and 335/30 tires. Could have went with 275 but would have to raise the coil overs to make work and would not have had the stance I wanted. Have a Chassisworks pro G and DSE quadralink mini tubbed.

Like they say it's only :G-Dub:

http://i305.photobucket.com/albums/nn232/cjfar_2008/IMG_0333_zps60e75250.jpg

http://i305.photobucket.com/albums/nn232/cjfar_2008/IMG_0334_zps2cc8953d.jpg



http://i1211.photobucket.com/albums/cc437/irishlsxer/photo_zpsc1a60cc2.jpg