SBC Heads ???

[markss28]

What heads for a 383 are best out of the box with about 10.1 compression?
It will be for a strip/street application. Aluminum heads or iron price some where between $800-$1300.

Any answers will be apreciated and the winner will get a free subscription to friendship and possibly a high five hehehe.

[XcYZ]

I know a lot of guys love the AFR 195's on their 383's, but they might be on the upper end of your budget listed. They come in 68 or 74cc chambers.

[markss28]

Ive checked them out and yea they are pricey. I am looking for something like
64cc with 2.02s 1.60s

[TravisB]

Ive checked them out and yea they are pricey. I am looking for something like
64cc with 2.02s 1.60s


Darts are always a good choice

[zbugger]

In all honesty, try looking at a set of Brodix heads. They make great power.

[rocketman]

brodix track 1's

[cutlasskid]

if you get dart check the valves before you bolt them on my wer"nt even touching the seats so i had to get them reworked out of the box. not sure if dart did them or if jegs buys them bare and assembles them.

[rocketman]

the last 2-3 pairs of darts we have got in at the shop,sucked we had to do a bunch of valve work to them.and there port work lately isnt that great.

[jonny51]

brodix track 1's

:thumbsup: :thumbsup: :thumbsup:
http://img.villagephotos.com/p/2005-11/1102940/IMG_0828.JPG

[rocketman]

:thumbsup: :thumbsup: :thumbsup:
http://img.villagephotos.com/p/2005-11/1102940/IMG_0828.JPG
i think thats good.look good to me

[MarkM66]

:thumbsup: :thumbsup: :thumbsup:
http://img.villagephotos.com/p/2005-11/1102940/IMG_0828.JPG

Damn that pushrod for blocking that port! :lol:

Those do look good. How much for a set cnc'ed like that?

[jonny51]

Mark for the CnC Track 1's they are something like $2400.Pushrod?there is no pushrod there :lol: .

[david@ronsraceshop]

try looking at the RHS heads formerly known as Pro Top Line
here's a link for you

Cylinder heads (http://www.ronsraceshop.com/arao/10006/Cylinder%20Heads/)

here you can check out all your choices

[budlight]

I did not want to go over board with my first 383 project so i only ordered Dar 215 cc heads with the optional 2.08/1.625 valve and factory porting.

They were really nice for a couple years until I felt the need to upgrade.

What you really need to look for in a head is good flow like 280 minimum CFM intake and the correct CC for your application. The victor Jr or pick up some used AFR 210's That way you won't feel the need to upgrade so soon!

[race-rodz]

i will see your cnc'd track 1's and raise ya a set of cnc'd and hand finished sb2.2's.

2.17in/1.6ex, 49cc chambers, 285cc intake runners, havent flowed them yet...so no cfm info "yet"
http://img112.imageshack.us/img112/7281/sb220026nm.jpg
http://img112.imageshack.us/img112/1056/sb220031hr.jpg
http://img112.imageshack.us/img112/3306/sb220045jf.jpg

[race-rodz]

http://img49.imageshack.us/img49/2614/sb220013wb.jpg
hand finished intake port

http://img96.imageshack.us/img96/257/sb220056md.jpg
cnc'd intake port

http://img96.imageshack.us/img96/737/sb220063ku.jpg
cnc'd chamber

[XcYZ]

Now that's cool. :yes:

[rwhite692]

Jon how long did you have to wait on your CNCd T1s?

[jonny51]

Jon how long did you have to wait on your CNCd T1s?

Just a couple of weeks Rob.