Big Hemi + twin screw, ever seen one on the street?

[SuperB70]

I'm building one at the moment.

Custom made by me

(and with help of some of my talented friends)

[Lowfast]

All I have to say is...

POW!

[badmatt]

how the hell did you get KB to sell you a blower? Hell i tried that and all i got was a big fat "NO"

looks great! I assume a hemi blower intake with a new top plate?

[SuperB70]

how the hell did you get KB to sell you a blower? Hell i tried that and all i got was a big fat "NO"

looks great! I assume a hemi blower intake with a new top plate?

Thanks guys. Its going to be a monster!

Well, I think that it got something to do with that we bought three unit at the same time.

And that we bought them from Sweden, where they are made.

About the intake, your right. It was a new BDS intake but not much left, new bottom plate, new top plate and over an inch lower.

Today welding injector plugs and fuelrails mounting tabs...

[andrewb70]

KB blowers are made by Autorotor...

Andrew

[SuperB70]

KB blowers are made by Autorotor...

Andrew

What I know of, Autorotor is not the manufacturer.

HPS Superchargers Ab is:

http://www.hpssuperchargers.com/about-thecompany/

progress: Injector plugs welded

[andrewb70]

What I know of, Autorotor is not the manufacturer.

HPS Superchargers Ab is:

http://www.hpssuperchargers.com/about-thecompany/

progress: Injector plugs welded

It all looks like the old Autorotor line that used to be owned by Oncon AB. Perhaps they sold it off and renamed in?

Andrew

[SuperB70]

I dont know, and frankly I dont care.

They build and sell "super" superchargers.

We deal with jmtech.se and tech help is first-class.

Little progress... and little hiccup, throttle links will not fit, have to make something else...

[SuperB70]

Little progress, throttle link done, now it's time for something innovative stuff :thumbsup:

Distriputer: gone, custom made cps in its place.

Sparkplug wires: gone, 8 direct ignition coils.

Making air filter tube, from aluminium , oval, trying to use all the space we got.

Waiting for electric waterpump so I can fab belt guide pulleys and auto tensioner.

[Andrew]

This is going to be an incredible piece when complete.
Sorry if I missed it but what you are putting it into?

[SuperB70]

A '68 Charger. "Black Bird" That link you can see what else the owner has done on it, last page and half is my work.

http://www.cardomain.com/ride/3837245/1968-dodge-charger

There you can see that the car is ready for to power. Only missing roll bars and huge exhaust, Masi (owner) dont want them on a street car.

I'm doing this as an kind of show case for my company that it starting soon.

[The T-man]

Nice...
better put some tape over that oil fill..:_paranoid

[SuperB70]

Thanks,

Valve covers will be chanced to Stage V aluminium cast covers.

And I do keep all holes masked shut.

Edit: Actually, I'm not first with direct spark on Hemi, a guy from Sweden (where else? neighbor, naturally) is first:

http://www.hemipanter.se/

Sweet DeTomaso Pantera with 526cid Hemi.

[SuperB70]

So, 600 views but so few comments...?

Should I post some updates...?

[GregWeld]

I just went thru all the photos and captions (funny as hell). Nice job!!


:thumbsup:

[camcojb]

So, 600 views but so few comments...?

Should I post some updates...?

yep. :thumbsup: Updates and pics keep threads going. :unibrow:

[SuperB70]

No pic yet, just painting parts and starting on final assembly.

Charger is cardomain.com showoff of the week.

At the front page.:thumbsup:

[SuperB70]

Little something upcoming...
Air filter housing, came out pretty nice..
35535

After wrinkle paint its way more nice...
35533

All engine intake tubing is wrinkled, as is intake manifold... as are valve covers and engine block..

I did also build new 4" exhaust w/ Flowmaster race bullets & mufflers.
35534

Painted with aluminium/silicone high temp paint.

[SuperB70]

So over 1K views but still not much comments...

Lets update this then...

I've been busy but electrician how was hired to install Motec-ECU and ISIS-Power has been slow.

He made engine wiring harness and he does outstanding work but it takes so much time.

We are 5 weeks behind original schedule.

Engine is all painted and has been assembled. Cool thing is that it fits under stock hood as plan

Not running yet.

ISIS is unfinished.

Now I have taken it to next guy...

Then to dyno... injector are good around 930HP on E85, Owner says that around 800Hp is enough. This is a street car.

Sorry about the quality of my pics,
I think my garage camera is at end of its life.
36012
36013
36014
36015
36016
36017

So its done on my behalf,
I'm flying to Florida at first of July :thumbsup:

[GregWeld]

Is the car in Florida? You lost me.... why the Florida trip?

[SuperB70]

Well Greg,

The car is in Finland, last week I trailer'd it 150ml away to another specialist how will finish electrical stull, get it running and take it to dyno.

It is over 5 weeks overdo and sence I've already started my own company, I cant prolong this build any longer.
I'm glad & lucky that the cars owner is understanding with this..

I'm coming to States make some business deals for my new company.

Hopefully will have couple days to chill..