View Full Version : Procharger D-1sc
DutchSS
09-17-2011, 01:35 PM
Hi guys, i am currently running a 509 with 10,5 cr in my camaro and would like to boost it with 5 or 6 psi. I can buy a used D-1sc. Wil this work on my engine ? I know the D-1sc is a bit small, but I am not looking for high boost.
Thanks :lateral:
big_G
09-18-2011, 06:59 PM
Not too small. It will be just fine. I would, however, be wary of running boost with that compression. An intercooler is mandatory in your case, IMO.
DutchSS
09-19-2011, 10:28 AM
Thanks for your reply. I am thinking of converting to E85. If not I am gone run it on C14 or C16. Its for dragracing.
bski224
10-03-2011, 05:58 PM
Thats a fine size unit. I would MOST DEF run an Intercooler and E85 with that CR. Its a time bomb!!! but lots of fun!!
bigtime
10-03-2011, 08:55 PM
is this going to be EFI or blow thru? EFi your gonna want a intercooler for sure, blow thru you can get away with a little more.
DutchSS
10-16-2011, 03:39 AM
Blow through, I am in contact with CSU and C&S. Any thoughts about that ?
Thanks
Dutch,
I'm no supercharger expert, but I think that D-1 will be too small for your 500+ ci motor. Usually guys with 346-402 ci motors run a D-1. You may want to look into an f-1 for you application. Also, I have only read good dealings with CSU.
vBulletin® v3.8.11, Copyright ©2000-2025, vBulletin Solutions Inc.