PDA

View Full Version : SBC 406 with LT1/T56 Transmission

Cris@JCG
08-28-2011, 01:36 PM
This engine & transmission is great for 67 to 69 Camaro or 68 to 72 Nova.. The transmission was in a 68 Camaro..

406 SBC- original Chevy block
9.1 compression ratio
Lunati Rotating assembly -internal balance
Professional Products Harmonic balancer
Splayed main bearing caps
AFR cylinder heads- 195
Crower Cam- Lift int 540 exh 565 Duration @.050 int 236 exh 244 LSA 114 deg Hyd/Roller
Cower Hyd/Roller Lifers & rockers
MSD Distributor
Aluminum water pump
Power Master High torque starter
Edelbrock Air gap intake with 750 HP Carburetor or DFI complete system
Racing engine Analysis - 526 HP & 526 TQ

LT1 /T56 Transmission Rebuilt by Rockland Gear- 20k miles on rebuild
Mcleod billet flywheel with clutch & pressure plate
ATS transmission support
Driveshaft

Asking 8500.00 for everything.. have an option on intake systems.. only one set up goes with engine

Have a new set of Dynatech headers for Camaro/Nova.. additional 400.00

http://i1015.photobucket.com/albums/af278/jcgrestoration/IMG_1469.jpg

http://i1015.photobucket.com/albums/af278/jcgrestoration/IMG_1470.jpg

http://i1015.photobucket.com/albums/af278/jcgrestoration/IMG_1471.jpg

http://i1015.photobucket.com/albums/af278/jcgrestoration/IMG_1472.jpg

http://i1015.photobucket.com/albums/af278/jcgrestoration/IMG_1473.jpg

http://i1015.photobucket.com/albums/af278/jcgrestoration/IMG_1474.jpg

http://i1015.photobucket.com/albums/af278/jcgrestoration/IMG_1475.jpg
CamaroBill
08-28-2011, 09:45 PM
Are you willing to separate? IF so, how much for the engine and headers? Bill
Cris@JCG
08-29-2011, 06:02 AM
I will let go the engine with headers for 6800.00
Rick D
08-29-2011, 06:03 PM
Cris, how much for the trans setup??
Cris@JCG
08-30-2011, 10:23 AM
Rick- I only really included the trans set up to sweeten up the deal for somebody looking for a complete drivetrain.. If I just sell the motor by itself.. I am good with that.. Trans can be converted for an LS set up pretty easy.. & can use it on one of the shop builds


Cris, how much for the trans setup??
Rick D
08-30-2011, 07:47 PM
Rick- I only really included the trans set up to sweeten up the deal for somebody looking for a complete drivetrain.. If I just sell the motor by itself.. I am good with that.. Trans can be converted for an LS set up pretty easy.. & can use it on one of the shop builds

:P :P :P :thumbsup:

It's good Cris thats is what I wanted to do. Oh well I will keep looking.
Tweaked Zed
08-31-2011, 01:07 PM
Interested in the complete DFI. Email me at [email protected]

Thanks
Cris@JCG
08-31-2011, 06:39 PM
I need to sell the motor first before I know which intake system I will be left over..



Interested in the complete DFI. Email me at [email protected]

Thanks
Cris@JCG
12-04-2011, 05:09 PM
Bump!

I still have all these parts available.. PM me with reaonsable offers.. I will separate components.. Soon I will have a list of parts I have sitting on shelf that are just taking up space..
70rs
12-04-2011, 08:04 PM
Tried to pm regarding engine parts. Your in box is full.
Cris@JCG
12-04-2011, 08:07 PM
Just cleared it out..

Tried to pm regarding engine parts. Your in box is full.
Cris@JCG
08-15-2012, 02:01 PM
I have to move this motor.. have an over stock of engines sitting here @ the shop...

Engine 4500.00
Trans set up 1200.00
headers 400.00



This engine & transmission is great for 67 to 69 Camaro or 68 to 72 Nova.. The transmission was in a 68 Camaro..

406 SBC- original Chevy block
9.1 compression ratio
Lunati Rotating assembly -internal balance
Professional Products Harmonic balancer
Splayed main bearing caps
AFR cylinder heads- 195
Crower Cam- Lift int 540 exh 565 Duration @.050 int 236 exh 244 LSA 114 deg Hyd/Roller
Cower Hyd/Roller Lifers & rockers
MSD Distributor
Aluminum water pump
Power Master High torque starter
Edelbrock Air gap intake with 750 HP Carburetor or DFI complete system
Racing engine Analysis - 526 HP & 526 TQ

LT1 /T56 Transmission Rebuilt by Rockland Gear- 20k miles on rebuild
Mcleod billet flywheel with clutch & pressure plate
ATS transmission support
Driveshaft

Asking 8500.00 for everything.. have an option on intake systems.. only one set up goes with engine

Have a new set of Dynatech headers for Camaro/Nova.. additional 400.00

http://i1015.photobucket.com/albums/af278/jcgrestoration/IMG_1469.jpg

http://i1015.photobucket.com/albums/af278/jcgrestoration/IMG_1470.jpg

http://i1015.photobucket.com/albums/af278/jcgrestoration/IMG_1471.jpg

http://i1015.photobucket.com/albums/af278/jcgrestoration/IMG_1472.jpg

http://i1015.photobucket.com/albums/af278/jcgrestoration/IMG_1473.jpg

http://i1015.photobucket.com/albums/af278/jcgrestoration/IMG_1474.jpg

http://i1015.photobucket.com/albums/af278/jcgrestoration/IMG_1475.jpg
woody80z28
08-27-2012, 08:50 AM
Interested in the EFI if you are willing to separate.
Cris@JCG
08-27-2012, 07:57 PM
Sure.. 800.00 complete with the Accel wiring & distributor.. & what ever parts I have for it..



Interested in the EFI if you are willing to separate.
Cris@JCG
09-05-2012, 08:44 AM
All parts have been sold!