Parts for Sale: SBC/BBC DSE Suspension all kinds

[Steve68]

1. DSE F Body swaybar 1 1/8, new used for mock up, new $210 me $175(SOLD)

2. DSE Coilovers Koni with yellow springs used for short time , new $700, me $400

http://i1191.photobucket.com/albums/z461/Steve6869/004-7.jpg
http://i1191.photobucket.com/albums/z461/Steve6869/003-8.jpg

3.DSE Upper control arms NIB, used for mock up, these are a early version no stops toward the ball joint, BUT they do have the polished shafts, have all parts, new $695 me $525

http://i1191.photobucket.com/albums/z461/Steve6869/005-8.jpg
http://i1191.photobucket.com/albums/z461/Steve6869/006-6.jpg

4.GM lower control arms with DSE Delrin bushings modified for DSE coilovers, powdercoated, very nice, $200
http://i1191.photobucket.com/albums/z461/Steve6869/001-12.jpg

5.AGR p/n 292112 12.1, 2 3/2 turns to lock, cast box with billet parts low miles, bought from the forum, was local to me, has a long billit pitman arm, might me for a later model, will check with AGR, primed with etch prime ready for paint! $250
http://i1191.photobucket.com/albums/z461/Steve6869/001-11.jpg

http://i1191.photobucket.com/albums/z461/Steve6869/002-9.jpg
will fit 77-89 direct bolt in, early cars say 1st gen, rag joint change, late model, will need a hose fitting change, this is from AGR.


6. Holly 950 HP 4150 nice carb needs rebuilt new $950 me $500
http://i1191.photobucket.com/albums/z461/Steve6869/003-7.jpg

7. MSD 6AL NIB $200(SOLD)

8.MSD BTM used $60(SOLD)

9.Energy suspension 9.5129B and 9.8117B these are sway bar parts in blue endlinks and mounts $25 for both

10. Edelbrock BBC Aluminium Heads Vic Jr Oval ports NIB, new$1700 me $1500

11. Factory sub with DSE coilover conversion and A/C pocket welded in the crossmember, $600 local P/U,

Will post pics later,
make offer if interested,

pics on request havent uploaded them,

harley6869@bells o uth.net

[65_LS1_T56]

I'm interested in the AGR box. Part number? 3 or 4 bolt mount? 13/16" or 3/4" input? Pics when available too :)
Any info would be great.
Thanks,

[Steve68]

I'll get all that for you later today, thanks

[70Nova]

PM sent

[Steve68]

Replied, I'll work on pics later today,

[Steve68]

Pics sent, couple items have sold,

[65_LS1_T56]

5.AGR p/n 292112 12.1, 2 3/2 turns to lock, cast box with billet parts low miles, bought from the forum, was local to me, has a long billit pitman arm, might me for a later model, will check with AGR, primed with etch prime ready for paint! $250
http://i1191.photobucket.com/albums/z461/Steve6869/001-11.jpg

http://i1191.photobucket.com/albums/z461/Steve6869/002-9.jpg
will fit 77-89 direct bolt in, early cars say 1st gen, rag joint change, late model, will need a hose fitting change, this is from AGR.



Sorry, doesnt like what I need, thanks though and GLWS.

[Steve68]

Sent you a PM, too see what you need,

[Steve68]

http://www.agrperformance.com/catalog/products_parts.php?cat=100&product=129&make=GM&model=123

Steering box info,

GM used the same box from 64-88, 800 series box, fits different configs depending on the car, rag joint for some, pitman arm placement for others and then some got hose fittings changes,

[Steve68]

SOLD some items!!

[70Nova]

Received MSD Stuff. Thanks:thumbsup:

[Steve68]

Your welcome!!!

Returned PM on the box!!

[cees67]

thanks!

[z4me69]

Do you still have the coilovers and springs if you do need pics thanks

[Steve68]

I do, can either post pics here, or pm me a email, thanks Steve

[z4me69]

I sent you a pm but you can post them here if u like

[Steve68]

Post some pics,

[Steve68]

looking to sell some part, make offer,

[Steve68]

If items are sold, they have been marked sold!