PDA

View Full Version : HELP Need measurements of 10bolt & 12 bolt for 1st & 2nd Camaro rear-end

chevyhector
03-10-2011, 01:11 PM
Hey guys,

Can someone send me (or a link to a web site) the actual measurements of the rear axle from drum to drum for 1st & 2 nd gen Camaro’s. I have a project and I wanna have all measurements correct.

Thanks
Hec
rwhite692
03-10-2011, 01:36 PM
First gen housing flange to flange is 54 1/2"

total width, from axle (brake mounting) face to face, is 60"

Second gen is .875" wider. Note that the spring perches are also spaced differently vs first gen

Rob
chevyhector
03-10-2011, 02:00 PM
First gen housing flange to flange is 54 1/2"

total width, from axle (brake mounting) face to face, is 60"

Second gen is .875" wider. Note that the spring perches are also spaced differently vs first gen

Rob


Thank you very much Rob.