72 Camaro Build

[coolwelder62]

My son wanted me to start a build thread of my 72 camaro so he can try posting photo's for me.It's std. 72 car there was no rust to speak of just some panel damage from when they try to load it with a fork lift. I built my own sub frame that will use c6 componets.A home built 4 link. strange coil overs at each corner. LS2 w/t56 6 speed,moser 9inch 3:73 gears,no body mods,stock interior w/corbeau GTSII seats,8 pt. 1.75x.125 DOM roll cage,Fikse profil 13's 18x11 w/315/30/18 frts,18x12 w/335/30/18 rear,vintage A/C,custom auto sound secert audio system,and a top secert paint color.

[coolwelder62]

Well it look's like he needs more practic.:lol:

[camcojb]

Well it look's like he needs more practic.:lol:
like father like son............. :lol: Hang in there, you'll get it.

Jody

[coolwelder62]

I think he did it LOL

[coolwelder62]

Here are some more shots.

[Rick D]

Very nice work, looken real nice. Scott what are you using for ends on the rear end links??

[coolwelder62]

The frt. is a wide poly bushing from ridetech,rear is a delrin incased johnny joint from ballistic fabrication w/9/16 thur bolt's.I really like the way DSE quadra links is built and works,so I built mine in the same fashion.I used 1.250X.120 wall 4130 tube for connecting link's & 2in.X .125wall 4130 tubing for the subframe conector's.The bay bar's are next on the list of project's.Will have Brandon keep posting photo's as work progresses.

[73CPCAMARO]

It is nice to see another 2nd gen build. Thanks for the photos and we need more! :yes:

Great job and love to see the progress. Good luck with it!

Brian

[coolwelder62]

Thank's Brian, It's up to Brandon as to how soon the photo's get posted.I still can't figure it out. I have more shot's we could post,but you know how teenager's are.Everything is on their time frame.Now that he has figured it out I will try a find a way to blackmale him with something he want's or need's.:lol:

[66LS7]

Looks great can't wait to see it on the ground as a roller. It's good to see more 2nd gen Camaro's being built, they are my favorite. I see you are doing a cage in it, are you going to keep the back seat?

[coolwelder62]

Randy I am thinking of doing a rear shelf like DSE put Dale jr's 72.Under the shelf will be (of course OPTIMA yellow top-my pal Jimi Day has made sure I have a garage full of those.)Power inveter, 12V.air compressor(for ajusting tire pressuers during track days & auto x's,low profile jack & complete tool kit and all the radio componet's.I really want to make the power tour in 2011.

[camcojb]

Randy I am thinking of doing a rear shelf like DSE put Dale jr's 72.Under the shelf will be (of course OPTIMA yellow top-my pal Jimi Day has made sure I have a garage full of those.)Power inveter, 12V.air compressor(for ajusting tire pressuers during track days & auto x's,low profile jack & complete tool kit and all the radio componet's.I really want to make the power tour in 2011.
funnest car thing you'll ever do Scott................. :thumbsup:

Jody

[Cris@JCG]

Nice 2nd gen build Scott!! Ican't wait to see it complete..

[coolwelder62]

funnest car thing you'll ever do Scott................. :thumbsup:

Jody
Jody in 2002 we started in Lincoln Ne. and made to ST.Louis then had to turn around and come my buddy eat some thing that made him sick.Had fun for awhile.:lol: :lol:

[tones2SS]

Very nice Scott. Keep us posted. :thumbsup:
Seems like the 2nd gens are getting some serious love these days!

[War]

Very nice build Scott. Great job on the subframe. Looks like this should be a fun car when finished.

[coolwelder62]

Very nice build Scott. Great job on the subframe. Looks like this should be a fun car when finished.

THANK'S JASON, Coming from you,that's great.How's your car coming along.It is going to be a real show stopper.:thumbsup:

[Rybar]

Looking good Scott, glad you figured out how to post pics. You know we all love pics here :unibrow:

[coolwelder62]

Looking good Scott, glad you figured out how to post pics. You know we all love pics here :unibrow:
My 14 year old figured the photo resizing out.Now I am trying to get him to resize what I did today.Then I can post'm.I was able to post over on the nova site because you didn't have to down size them.KID's gotta love'm.:lol:

[7TSS]

Cool project. Wish I had the talent to fab my own stuff. :hail:

Btw here's a simple to use picture resizer I found online

http://www.shrinkpictures.com/

[coolwelder62]

Thank's Goodwin,I have to fab my own stuff.Because my wife hide's the check book and the credit card's so I can't use them.If it wasn't for the blood I sell every tues. & thurs. And the dairy cow stalls I clean out every other night, I wouldn't get any part's bought.:lol: :lol:

[coolwelder62]

Here are some more shots of what I did today.I fabed up a radiator cover plate which will need some corner's welded on & then some fender/core surport strut's.I want to use one of those cool anvil auto closeout's so laid the 3/8 rod end's on top of the core surport w/some cone bushing's I had. I will DA the alum. then have it powder coated before instllation.I stoped off at the bone yard last week and found a 3.5 alum. drive shaft out of a 2004 crown vic. cop car ($15.00). Shortened it 5in. and bang it fell right in place. Advanced Auto had some crossover ujoint's ($9.90ea.) that helped it fit my T56 slip yoke & 1310 9in. ford pinion yoke (Labor to shorten priceless).I am going to scotch brite the shaft and leave the painted police decal on it then clearcoat.Now all I need are some,cop shock's & cop brake's and I'm ready to roll.

[Ron in SoCal]

So cool Scott. Not only (normal) awesome stuff that comes out of your shop, but now vintage parts melded in. I love the look of the radiator cover and fender braces too. Keep going man...

[coolwelder62]

Thank's Ron.:thumbsup:

[War]

THANK'S JASON, Coming from you,that's great.How's your car coming along.It is going to be a real show stopper.:thumbsup:

Coming from me? You must have me confused with someone else.:lol: Cars coming along, slowly, but making progress. Thanks for asking. Looks like you've been busy though.

[War]

Now, if we can get you to post bigger pics!

[coolwelder62]

Now, if we can get you to post bigger pics!

My son Brandon is doing the posting for me. The posting side of my brain is dead/mush.I just happy that we get any photo's posted at all.Brandon's 14 and just got his farm driver's permit,and now want a set of wheel's, so we wont go look at anything until he learn's how to make them bigger.:lol: :lol:

[tones2SS]

Nice work on the car. Looks really good.:thumbsup:

[Track Junky]

Way to go Scott, great idea on the driveshaft. :thumbsup:

[Jay Hilliard]

Looking great Scott. You are making good progress.

[Matt@BOS]

Scott, I'm sure you've been asked a million times, but I've never read what you did to fit a 315 tire up front. Care to divulge your secrets? :unibrow:

Matt

[coolwelder62]

Scott, I'm sure you've been asked a million times, but I've never read what you did to fit a 315 tire up front. Care to divulge your secrets? :unibrow:

MattMatt my subframe rail's are only 32inches outside to outside.My frt wheels are 18x11's (12inches over all) with 7.375 back space.I have the camber set at 3Degrees-neg.mainly for contact patch during track day's.W/the camber set 1.5 degees -neg. they slightly rub the very outer edge of the iner wheel house. I used a hammer and dolley to work the outer edge up &out giving me a little more clearance.But I had to have it bolted to the fender so as was hammering on it would stay.Then I took it apart and used the planishing hammer to smooth it all out so no one could tell what I did unless they look real hard.W/7.375 backspace the inside of the wheels will just barely rub so smoothed the back side of the lower a arm about an 1/8 inch.Under super hard braking w/that much back spacing the inside of the tire will rub on the top inside of the iner fender just under the hood hinge.I know this because after and real fast track day the paint had been rubed off.At lock to lock the tires are about 1/4 inch for outside of the frame rails.The 315's will track alover the road,those slight groves is what those big tires follow.But they really look bad a$$.Thanks for asking Matt.I hope your camaro comes back togather better than before.Scott.

[AALynch]

Scott, the car looks great! I've got all my suspension stuff beadblasted and painted, we need to make another trip out to you sometime soon to talk over this subframe with you once more. Things have been really crazy since Carlisle, and I've been telling myself I need to finish fabbing my center console before I tear into something else...

Keep it up!
-Adam

[coolwelder62]

Adam sounds great.Scott.

[coolwelder62]

I took some time and started working on the bay bar's last night.

[Cris@JCG]

I like it Scott!! Nice work.. :D

I took some time and started working on the bay bar's last night.

[waynieZ]

Your progress looks good.

[73CPCAMARO]

Very nice looking setup. :thumbsup:

[coolwelder62]

Brian, did you get some color laid down on your B.A. ride.:thumbsup:

[73CPCAMARO]

Brian, did you get some color laid down on your B.A. ride.:thumbsup:

If grey qualifies as color, yes. :D Next week Orange!

[coolwelder62]

Man I can't wait to see it under color.you have an awesome build going there.:thumbsup:

[nvr2fst]

Moving along pretty quick Scott, looks great so far. Just noticed your selling the 69, now I know why.

[coolwelder62]

Today I took sometime to set the car on the gound. 315's on a 18x11 frt. wheel w/a ton of room.Now I just need to DA it all smooth like WAR.

[War]

Incredible job Scott! Love that front tire, nice stance too.

[awr68]

Looks great! Need bigger pics tho! :cheers:

[War]

Looks great! Need bigger pics tho! :cheers:

Were lucky to get those. It is what it is.

[coolwelder62]

Were lucky to get those. It is what it is.:lol: :lol:

Hey, My son brandon is up loading these for me.If you go to bottom of your screen & up upsize it to 400% they get bigger.:lol: :lol:

[coolwelder62]

Looks great! Need bigger pics tho! :cheers:

Hey,Anthony how does a guy get 5,503 post's.I've only got 790 and seem to be on this damn PC 24/7. Is someone paying you per post.:lol: :lol: Scott

[awr68]

Hey,Anthony how does a guy get 5,503 post's.I've only got 790 and seem to be on this damn PC 24/7. Is someone paying you per post.:lol: :lol: Scott

That's funny!
Probably because 'it seems like you are on 24/7'.....and at times I am!! Funny thing is, there's no way I'm catching Jody's post count! :lateral:

Car looks killer! :thumbsup:

[Jtomas801]

Looks great as always Scott, keep up the great work.

Jon

[Track Junky]

Cant wait to see her painted and on the road. Your almost there Scott. I think you should paint her chevy hugger orange with white stripes. Heard it makes you go faster :D

[Vince@Meanstreets]

I am going to scotch brite the shaft and leave the painted police decal on it then clearcoat.Now all I need are some,cop shock's & cop brake's and I'm ready to roll.

haaa classic.

[coolwelder62]

Cant wait to see her painted and on the road. Your almost there Scott. I think you should paint her chevy hugger orange with white stripes. Heard it makes you go faster :D
Gaetano,
There are a bunch of orange 2nd gens out there right now. I like the mulsanna blue,or a benz bright silver.I been thinking I am going to need alot more motor than I have now. Mast motor sports sell a 690hp SS427 that might work.I still need to fab a dash & gauge insert,hang some a/c.build a rear package shelf like jack ass has,fab exhaust,mount the steering column,build a fuel tank,mount the gas pedal,fix a few small rust holes & fab a trailer hitch and small 4x4 2 wheeled trailer.I think I will up grade to new ZO6 brakes and sell the Z51 kore 3 setup I have now.And look for a smokin deal on some forgelines.would like to have it ready for paint jan.1,March 1 start assem.:lol: :lol:

[skatinjay27]

this car is turning out awesome but i wouldnt expect anything less from you. lets just hope you keep this one till its done.:D

[itsals1]

:hail: WOW!, Some how I missed this thread, it looks great Scott. I think your really going to love this camaro when she's done. Speaking of that do you have a name for her yet?

Travis

[coolwelder62]

this car is turning out awesome but i wouldnt expect anything less from you. lets just hope you keep this one till its done.:D

After next sun. when I deliver the blue 69,I will have to finish it or walk.:lol:

[coolwelder62]

Travis, Thank's. I kinda like the name SCRAPS. I have been building it from leftover's I had laying around, & some part's that I traded for over the last year.I am tying to stay on a budget.But if I sell the LS2 and go w/ more motor that might kill that deal.Just going to keep plugging along.

[Track Junky]

I say go with more motor. I thought going from 500 hp to 620 was going to be intimidating but its just more fun. Only i still dont know what traction is like on 200 tread wear tires.

Benz silver would be cool with black wheels. I've been on this black wheel kick lately.

I can see where your headed with this thing and have a feeling it will be seeing alot of events. Go gettem Scott!!:thumbsup:

[coolwelder62]

I say go with more motor. I thought going from 500 hp to 620 was going to be intimidating but its just more fun. Only i still dont know what traction is like on 200 tread wear tires.

Benz silver would be cool with black wheels. I've been on this black wheel kick lately.

I can see where your headed with this thing and have a feeling it will be seeing alot of events. Go gettem Scott!!:thumbsup: everbody doing Black center's.

If I go w/forgeline's Ilike the gunmetal center's w/gloss clear & brushed rim's w/gloss clear and hidden hardare.Going to put some hoosiers R6's on the fikse's.Other than the wheels I want the car to real plain jane.Sleeper like

[Track Junky]

I am definitely liking the R6 direction but how are you going to make Optima next year if you run Hoosiers. With the trailor hitch set up I thought you were going to try and hit a couple GG auto-x's and win your way into Optima.

[89 RS]

Going to be even sweeter when it gets paint, awesome build man.

[coolwelder62]

I am definitely liking the R6 direction but how are you going to make Optima next year if you run Hoosiers. With the trailor hitch set up I thought you were going to try and hit a couple GG auto-x's and win your way into Optima.That's the plan,but I will put R6's on the fikse's. I have 2 set's of BFG's KDW's 295/30/18's & 335/30/18's for winning the last two KC goodguy's. If I can get a good deal on some forgelines that's what I mount on them.Driving and A-X on street tire's.And my little trailer will have a tire carrier on the frt. of it.Make run's on street tire's then change out for R6's make some run's on race tire's compare the differant's.That way I can drive to the event's unless the whole family want's to come. Then we will have to load up the BIG rig.:lol: :lol:

[tones2SS]

Looking good Chris. :thumbsup:

[66LS7]

:thumbsup: Scott , the project is really looking great!!

[coolwelder62]

Well in my last post I was looking to find a good deal on some Forgeline's.Well Frank at Prodigey Custom's steped up and gave me a smokin good deal on some Forgeline's and a set of wilwood brake's.Here's a sneak peak at one of the wheels.Will unpack the rest and get the BFG's mounted tomorrow.And post up photo's of everything tomorrow.I would still sell this project if the right buyer comes along.But if not it will be full steam ahead to get it finished by April.

[tones2SS]

Nice wheel.:thumbsup:
Forgeline makes a killer wheel.

[rlplive]

Scott, this thing is looking great. I hope things are going well.

[Jay Hilliard]

Car looks awesome Scott! Nice job on the bay bars and subframe.

[mexMan]

Camaro is looking good! What color is it going to be?

[coolwelder62]

Thank's guys.I am working on the dash install right now.Will post some photo's of the new forgeline's installed tonight.Color choice has me stumped.If I keep it I want a color that folks are not using alot of.Maybe satarn yellow w/satin black Dale jr style stripe,or astro blue like the DSE's 70 test camaro.I might let the wife pick the color.

[mexMan]

So pink it is?:theresa:

[coolwelder62]

A few shot's of the new foreline's.18x11's up frontw/ BFG's295/35/18 and 18x12's w/BFG's 335/30/18's rear.

[HWY Nova]

A few shot's of the new foreline's.18x11's up frontw/ BFG's295/35/18 and 18x12's w/BFG's 335/30/18's rear.

Nice!.........

[HRBS]

Great wheel / sizes for that car Scott !
Nice !

[coolwelder62]

So pink it is?:theresa:

Teresa really like's school bus yellow.I like astro blue.

[mexMan]

You could mix 'em, like a 2nd gen Sunoco Camaro :rolleyes:

[coolwelder62]

Sunoco camaro's get to much atention when take them out in public.I need something will fly under the radar.I might go w/my orignal color choice PPG mineral gray.

[mexMan]

Then make it look like this:
http://blogs.discovery.com/photos/uncategorized/2008/04/03/stealth_600.jpg
or buy a Chevy Aveo :rolleyes:
Seriously, some dark shade of gray would look cool, or silver with black stripes, dunno, something simple, and dark, but I¿m not sure what paint scheme are you looking for, plain, striped maybe?

[bonecrrusher]

Woah... just stumbling across this now...

CoolWelder62... I met you when you where leaving DSE to go sell the Sunoco Camaro... I was that guy in the G8 saying "hey i saw this car on lat-g, or pro-touring.com"

Car is looking good - finally glad I saw this!

[coolwelder62]

Thank's,It was great meeting you and everyone else that weekend.My son Kevin who you met would like to have a G8.He was asking the other day if those are offered in a std. transmission or auto only.Scott

[tones2SS]

Looks great Scott.
Keep the updates coming.:thumbsup:

[bonecrrusher]

Thank's,It was great meeting you and everyone else that weekend.My son Kevin who you met would like to have a G8.He was asking the other day if those are offered in a std. transmission or auto only.Scott

They are offered in a tr6060 - newer version of the t56 6 speed manual in the GXP models - The GXP has the 430 hp LS3 and 6 speed manual behind it.

I love my GT - no issues with it ever!

[coolwelder62]

Here's a few update's.



http://s1196.photobucket.com/albums/aa408/vrp62/

[Ron in SoCal]

Here's a few update's.



http://s1196.photobucket.com/albums/aa408/vrp62/

What are those, coil covers? Nice work Scott!

[pokey64]

I'm liking the dimple details Scott. Keep the updates coming! :thumbsup:

http://i1196.photobucket.com/albums/aa408/vrp62/IMG_0008.jpg
http://i1196.photobucket.com/albums/aa408/vrp62/IMG_0388.jpg

[coolwelder62]

I'm liking the dimple details Scott. Keep the updates coming! :thumbsup:

http://i1196.photobucket.com/albums/aa408/vrp62/IMG_0008.jpg
http://i1196.photobucket.com/albums/aa408/vrp62/IMG_0388.jpg
Ron,Ed,those are LS2 GTO coilcover's.I cut the inset area out where it said GTO then flare punched some .063/3003 alloy alum. sheet.The stainless wire cloth is from McMaster-Carr warehouse.Going to paint coil covers argent silver,and flared alum.pcs.black wrinkle then aircraft rivet the flared pcs. down.Car is headed off to the paint shop to day.Will add progress to the photo bucket as
Mr.Brian work's his magic.Thank's Scott

[MODO Innovations]

http://i1196.photobucket.com/albums/aa408/vrp62/IMG_0008.jpg


Clecos: A fabricators best friend.

My only problem with them is...I never seem to have enough.:thumbsup:

[Cris@JCG]

I am really digging what you are doing with the dash Scott!!

http://i1196.photobucket.com/albums/aa408/vrp62/IMG_0010.jpg

http://i1196.photobucket.com/albums/aa408/vrp62/IMG_0380.jpg

[DIGI-TAILS]

nice going scott!!! :)

[coolwelder62]

Clecos: A fabricators best friend.

My only problem with them is...I never seem to have enough.:thumbsup:

Your right Shannon,And if you let a friend barrow some most of the time you have drive across town to get them back.

[coolwelder62]

I am really digging what you are doing with the dash Scott!!

http://i1196.photobucket.com/albums/aa408/vrp62/IMG_0010.jpg

http://i1196.photobucket.com/albums/aa408/vrp62/IMG_0380.jpg

Thank's Cris,Let me know when your sub frame show's up.Scott

[WSSix]

Hood louvers are a good idea. Will you have them recessed or protruding? I like a lot of the details you're putting into this car. Thanks for sharing the pictures.

[HRBS]

Scott.... the lower dash looks incredible..... I always thought the lower portion in 2nd gens were lacking something.....

[coolwelder62]

Scott.... the lower dash looks incredible..... I always thought the lower portion in 2nd gens were lacking something.....

Thank's,I think your right about those's dash's.Dan Holoahn & DSE get all the credit for the dash design.I just strole the DSE site grabing idea's.

[coolwelder62]

Hood louvers are a good idea. Will you have them recessed or protruding? I like a lot of the details you're putting into this car. Thanks for sharing the pictures.

I droped the louvers in the hood and went with a scoop instead.I delivered the car to Brian Kellison for paint & body today.

[Jtomas801]

Looks great Scott! I also really like how the dash came out. Tell the painter to hurry up so you can put it back together already, lol.

Thanks,
Jon

[73CPCAMARO]

Nice fab work with the dash :thumbsup:

[coolwelder62]

Nice fab work with the dash :thumbsup:

Thank's Brian.

[radrambler]

Scott

Wow this car is gonna turn some heads!! :thumbsup:
Love It !!!

Tom

[coolwelder62]

Scott

Wow this car is gonna turn some heads!! :thumbsup:
Love It !!!

TomI dont know who's head it will turn.W/the Roadster shop & The Ring bros now building 2nd. gens. My junk is going to get overlooked.I am glad I decided to use real man sized tires on the front.:lol: And when I park it next to another 72 camaro everbody will know which one is mine.Tom thanks for all the great conversation's.:thumbsup: Scott

[radrambler]

I dont know who's head it will turn.W/the Roadster shop & The Ring bros now building 2nd. gens. My junk is going to get overlooked.I am glad I decided to use real man sized tires on the front.:lol: And when I park it next to another 72 camaro everbody will know which one is mine.Tom thanks for all the great conversation's.:thumbsup: Scott

Scott, yes those guys are building some cool second gens also but dont think they wont notice Yours. :thumbsup: The Conversations have been Great fun.

Tom

[coolwelder62]

The car is now at Kellison's Kustom's getting body and paint.Paint Color is top secert.:rofl:

[67CamNKC]

Looking nice Scott. I got to see the 69 up close when I bought the original sub frame off your jig. You do awesome work.

[Throttle]

Nice...:unibrow:

[RECOVERY ROOM]

nice work,Dash looks good finish it with some nice "French seams" and it's perfect. Can't go wrong with a second gen

[coolwelder62]

nice work,Dash looks good finish it with some nice "French seams" and it's perfect. Can't go wrong with a second genTracy,Are french seams the donuts w/ flosting on the top or filling in the middle.:lol:

[Sieg]

Good looking stuff Scotty - keep it up! :thumbsup:

[coolwelder62]

Nice...:unibrow:

Mike, I checked out your photo bucket,nice work,cool project.:thumbsup: Scott

[radrambler]

Scott
:lol: donuts... thats funny right there.

Tom

[Throttle]

Mike, I checked out your photo bucket,nice work,cool project.:thumbsup: Scott

Thanks. Nuthing like yours.

[RECOVERY ROOM]

Tracy,Are french seams the donuts w/ flosting on the top or filling in the middle.:lol:

The guys got jokes :rofl: .... (frosting)

[NovaBlue71]

The car is now at Kellison's Kustom's getting body and paint.Paint Color is top secert.:rofl:

Dude I know what the color is,but been sworn not to tell haha :rofl: Joe

[radrambler]

Dude I know what the color is,but been sworn not to tell haha :rofl: Joe ...:rofl:
UHUH! :thumbsup:

TOM

[coolwelder62]

The guys got jokes :rofl: .... (frosting)

No,I like donut's w/ flosting.I also like to eat chicken fly lice.:lol:

[coolwelder62]

Went to the body shop today.Almost ready for final block sanding.Left my camera at home.Will try and go back tomorrow.Can't make my mind on paint color.:_paranoid

[radrambler]

:lol: PAINT COLOR. HMMMMM
ya changed your mind again:_paranoid

Tom

[coolwelder62]

:lol: PAINT COLOR. HMMMMM
ya changed your mind again:_paranoid

TomNo my wife changed my mind for me.:_paranoid :_paranoid She said the color I picked out would not match any of her outfit's.:lol: :lol:

[coolwelder62]

Tom,You'd better get to work.I am about to catch up w/you on the views on my post's.:lol:

[ma73z]

All the 2nd. gens getting built is killing me, I started mine like 2 years ago and I'm nowhere near paint. Can't wait to see more pics. your car is my motivation.:hail:

[coolwelder62]

All the 2nd. gens getting built is killing me, I started mine like 2 years ago and I'm nowhere near paint. Can't wait to see more pics. your car is my motivation.:hail:Well how about when it comes home from paint you come up and spend the day at the shop.And you can see it as it go togather.Brian was not at home to day so photo's will have to wait.:thumbsup: Scott

[ma73z]

I may have to take you up on that, it would be great to see how the pros do it, and maybe I could absorb some knowledge from you.:cheers:

[coolwelder62]

I may have to take you up on that, it would be great to see how the pros do it, and maybe I could absorb some knowledge from you.:cheers:Well if you want to see a pro you will need to Visit (Rad Rides,DSE,IronWork's) I'm just a joe in a pole barn.But thanks for those kind words.Scott M.

[ma73z]

Let me know what day I'll be there! :unibrow:

[radrambler]

http://i907.photobucket.com/albums/ac278/kustomcarguy/IMG_0104.jpg

http://i907.photobucket.com/albums/ac278/kustomcarguy/sm72side.jpg


Im posting these for scott.. its turing out really nice
:thumbsup:
Tom

[radrambler]

http://i907.photobucket.com/albums/ac278/kustomcarguy/IMG_0137.jpg


:thumbsup:

[radrambler]

ITS GETTING THERE
http://i907.photobucket.com/albums/ac278/kustomcarguy/IMG_0134.jpg

:cool:
Tom

[radrambler]

http://i907.photobucket.com/albums/ac278/kustomcarguy/IMG_0123.jpg
http://i907.photobucket.com/albums/ac278/kustomcarguy/IMG_0152.jpg


:unibrow:

Tom

[syborg tt]

Tom are you moonlighting from your day job ?

Car looks awesome

[Tom.A]

Looks awesome :thumbsup:

[HWY Nova]

http://i907.photobucket.com/albums/ac278/kustomcarguy/IMG_0104.jpg

Tom

Great progress...........

But Tom, you made my heart race!!!!..... I saw that you were posting..... I saw the first pic...... and I thought "DAMN, that's a nice front subframe/motor set-up for a RAMBLER!!!!!"......

Silly me.



--Eric

[73CPCAMARO]

Scott,

Looking good! Nice color :D

Brian

[Rybar]

Car looks awesome Scott :thumbsup:

[coolwelder62]

Thank's for posting the photo's for me Tom.Seeing them real big vs. a thumbnail is nice.:thumbsup: Scott.

[radrambler]

Scott
no problem !! :cheers:

Eric...we have some plans that will make you say that anyway..:D
Scott is doing a great job on this car for sure

Tom

[ma73z]

Wow it's coming together quick, and looks great.:hail:

[awr68]

Looks great, Scott!!
Might want to swap the front wheels/tires before the first drive tho! ;)

[coolwelder62]

Scott,

Looking good! Nice color :D

BrianWell Brian,after seeing Dale Jr's camaro,Then your smokin cool camaro there was no other choice for a color.:thumbsup:

[Ron in SoCal]

Car's looking great Scott! :thumbsup:

[waynieZ]

X2 with Ron it looks sweet!

[cencalc6]

Scott you have a Awsome looking Car.... love the Fab work :thumbsup:

[War]

Scott you have a Awsome looking Car.... love the Fab work :thumbsup:

Agreed. Scott, did you decide to keep it or flip it.:lol:

[radrambler]

http://i907.photobucket.com/albums/ac278/kustomcarguy/IMG_0136.jpg


Tom

[Cris@JCG]

Tom/Scott- Looking good! Can't to see her done!

[coolwelder62]

Agreed. Scott, did you decide to keep it or flip it.:lol:When I did not sell it in it's unfinished cond. I decided to finish it out and hope that some one will buy it all buttoned up.This car seem's to be taking longer than normal to get completed.But maybe I have it ready to drive by the first of July.:_paranoid :_paranoid

[73CPCAMARO]

More photos!!!!! I want more photos!!!

Great job,
Brian

[speedjohnston]

I was just browsing some of the other second gens and your doing an awesome job. Can you finish mine! :yes:

[tones2SS]

Very nice Tom. Looks awesome.:cheers:

[CRCRFT78]

Geez Scott, what kind of payment plan do I need to get on to have one of your 2nd gens? I love it.

[coolwelder62]

Geez Scott, what kind of payment plan do I need to get on to have one of your 2nd gens? I love it.How about just 1 easy payment.:thumbsup: I only have the one 2nd. gen.I think the next project will be a PT.V-12 Ferrari.So I will be needing that large payment.:lol:

[tmadden]

http://i907.photobucket.com/albums/ac278/kustomcarguy/IMG_0136.jpg


Tom

Nice azz

[RECOVERY ROOM]

Looks Great !!

[WSSix]

fantastic!

[Flash68]

All these bad ass orange 2nd gens these days! :unibrow:

[70rs]

Looks fantastic Scott....as usual with all of your work!

[coolwelder62]

All these bad ass orange 2nd gens these days! :unibrow:I couldn't let Brian H.and Dale jr. have the only cool orange 2nd.gens.:lol:

[waynieZ]

It looks great.

[Track Junky]

Great build Scott, cant wait to see this one when it's finished :thumbsup:

[scottysimp7]

Sweet rig. Cant wait to see more:thumbsup:

[cacwyo]

Scott, I was wondering when you were going to get some new pics up. I was so tempted to post the ones I took the other day. Car is looking good. Who's doing the interior work?

Chris

[coolwelder62]

Scott, I was wondering when you were going to get some new pics up. I was so tempted to post the ones I took the other day. Car is looking good. Who's doing the interior work?

ChrisChris I Have no new photo's,Went to nashville just got home 10:00pm sun night.And will turn around and return next week end for run to MC.Going hang out with My buddy Albert
Melchior and Brian Finch.So it will be a few more weeks before I get a chance to work on it agian.My brother is going to do the the interior work for me.He has started building some really cool motorcycle seats,and want to start doing car seats and door panels now.Scott

[GregWeld]

Subscribed.
:D

[radrambler]

http://i907.photobucket.com/albums/ac278/kustomcarguy/IMG_0223.jpg

SPY PHOTO
Scotts 72 camaro build.... YES 335s on the front...:D



Tom

[scottysimp7]

Everyone is building super insane 2nd gen camaro's! Wheres the AWD camaro??????

[syborg tt]

Uhm Scott are you trying to overcompensate for something.

btw - it looks freaking sick.



SPY PHOTO
Scotts 72 camaro build.... YES 335s on the front...:D


http://i907.photobucket.com/albums/ac278/kustomcarguy/IMG_0223.jpg




Tom

[coolwelder62]

Uhm Scott are you trying to overcompensate for something.

btw - it looks freaking sick.I don't under stand.:_paranoid :_paranoid If the car look's really mean maybe people won't pick on me anymore.:lol:

[coolwelder62]

Everyone is building super insane 2nd gen camaro's! Wheres the AWD camaro??????It will be here sooner than you might think.

[Track Junky]

http://i907.photobucket.com/albums/ac278/kustomcarguy/IMG_0223.jpg

SPY PHOTO
Scotts 72 camaro build.... YES 335s on the front...:D



Tom

Holy Cow Scott!! :hail:

[73CPCAMARO]

:D Great idea!

How much steering angle are you able to get with that? How about ride height?

Good going. I still want more photos!

Brian

[Jr]

http://i907.photobucket.com/albums/ac278/kustomcarguy/IMG_0223.jpg

SPY PHOTO
Scotts 72 camaro build.... YES 335s on the front...:D



Tom

Is the finned cooler for trans or oil? Do those little things work/are the efficient in cooling?

[Ron in SoCal]

^ I've seen those used for oil and PS. Not yet sure what Scott has up his sleeve :thumbsup:

Those front meats look sick Scott. Way-to-go Brother! :cool:

[Flash68]

Is the finned cooler for trans or oil? Do those little things work/are the efficient in cooling?

That's exactly where my finned DSE PS cooler is sitting, altho his looks bigger and is angled a bit.

[coolwelder62]

Is the finned cooler for trans or oil? Do those little things work/are the efficient in cooling?That cooler is welded Coor's Beer can's that will cool Power Steering.:lol:

[coolwelder62]

:D Great idea!

How much steering angle are you able to get with that? How about ride height?

Good going. I still want more photos!

Brian
Those cool fordge lines are 18x12 w/ 7.25 back space.I get as much steering angle as the ARG rack allow's.

[Mover]

Hey Scott are you using one of your sub frames? I'm really liking those 315's up front.

[coolwelder62]

Hey Scott are you using one of your sub frames? I'm really liking those 315's up front.YES it is one of my sub frames. Those are real 335/30/18's.up front.

[radrambler]

Scott

I cant wait to watch KEVIN wheel it around the autocross..:thumbsup:
Looking great


Tom

[tones2SS]

Wow. That is sick!:hail:
Front end looks great. What size is going on the rear if 335/30/18 are on the fronts?:willy:

[coolwelder62]

Scott

I cant wait to watch KEVIN wheel it around the autocross..:thumbsup:
Looking great


TomForget Kevin,I am not letting him near this thing.He has been havin all the fun.I am going show everybody how it's done.:lol: :lol:

[Jtomas801]

Looks good Scott.

What headers are you using?

Thanks,
Jon

[pokey64]

Man I have tire envy...

Cars lookin great! Any chance it'll be at the Des moines GG? :unibrow:

[coolwelder62]

Man I have tire envy...

Cars lookin great! Any chance it'll be at the Des moines GG? :unibrow:I am working on it.If I do show up in Des moines w/the camaro the interior prob.won't be finished.:_paranoid

[coolwelder62]

Looks good Scott.

What headers are you using?

Thanks,
JonHeader's are AME cermaic coated.They are very well made.:thumbsup:

[gasfumes]

What motor mounts and adapter plate combination work on your sub frames?

[coolwelder62]

What motor mounts and adapter plate combination work on your sub frames?I use a poly motor mount from (SpeedwayMotors.com $60.00) and I and machined my own alum. adapter plates.Now Speedway Motors is making them in a complete kit for $69.99 I can't compete w/ that low price.So I will just tell subframe buyers the part number.

[gasfumes]

Whats the part numbers this is douglas proud owner of one your subframes ready to install engine :rofl:

[coolwelder62]

Whats the part numbers this is douglas proud owner of one your subframes ready to install engine :rofl:poly mounts #910-18015,Alum.adapter plates 916-18016 :thumbsup:

[Bryan O]

http://i907.photobucket.com/albums/ac278/kustomcarguy/IMG_0223.jpg

SPY PHOTO
Scotts 72 camaro build.... YES 335s on the front...:D

:wow:

[radrambler]

http://i907.photobucket.com/albums/ac278/kustomcarguy/IMG_0227.jpg:unibrow:


Tom

[70rs]

Very cool dash! I need one just like it for my '70!

[ma73z]

X2, could you copy that and send me one :unibrow:

[WSSix]

So Scott, can I send my 79TA to you to get new rear quarters put on? You seem to do ok work, lol. Your car is coming out nice. I'm drooling over the fact that you have 335's on the front. This car is serious inspiration for me. Keep up the great work.

[coolwelder62]

So Scott, can I send my 79TA to you to get new rear quarters put on? You seem to do ok work, lol. Your car is coming out nice. I'm drooling over the fact that you have 335's on the front. This car is serious inspiration for me. Keep up the great work.I have a 1970 firebird formula in the shop now that belongs to a very special customer from Toronto.It will be getting some serious work done too it.I am going to let the customer do the posting on the project.It would be a few week's before I could work on your T/A.Thanks Scott.:thumbsup:

[WSSix]

lol awesome! Can't wait to see this Formula. I've got some decisions I have to make about my TA. I hate that it just sits in GA without anything being done to it when it needs work. I'll keep you informed as I go about it all.

[coolwelder62]

lol awesome! Can't wait to see this Formula. I've got some decisions I have to make about my TA. I hate that it just sits in GA without anything being done to it when it needs work. I'll keep you informed as I go about it all. sounds goodTrey,Plus I would like some time for myself also so I get some work done on the great Pumpkin.:lol:Would like to have it Driving in a few weeks.

[radrambler]

http://i907.photobucket.com/albums/ac278/kustomcarguy/IMG_0334.jpg
http://i907.photobucket.com/albums/ac278/kustomcarguy/IMG_0332.jpg
http://i907.photobucket.com/albums/ac278/kustomcarguy/IMG_0333.jpg
http://i907.photobucket.com/albums/ac278/kustomcarguy/IMG_0331.jpg

:thumbsup:
TOM

[70rs]

Very, very cool project! Please keep the updates coming.

Scott, I would like to talk with you about making a duplicate dash insert and lower dash. Just the metal, no gauges, vents or switch gear. But with all of the openings cut and dimples formed.
Im in no rush, I know you have your hands full.
Maybe a few other items as well?

[coolwelder62]

[QUOTE=radrambler;355631]http://i907.photobucket.com/albums/ac278/kustomcarguy/IMG_0334.jpg
http://i907.photobucket.com/albums/ac278/kustomcarguy/IMG_0332.jpg
http://i907.photobucket.com/albums/ac278/kustomcarguy/IMG_0333.jpg
http://i907.photobucket.com/albums/ac278/kustomcarguy/IMG_0331.jpg

Shannon,At Modo Inovations sent me a really cool remote door lock kit,& a set of of his new black Alum. pedals pads.I will be starting the wiring this week end.As soon as I get the pedal pad's installed I will have Photo guru RadRambler Tom post those photo's up. The door lock kit is very complete and nicely made.For the money you can't beat these componet's.Thanks Shannon.:thumbsup: Scott M.

[Ron in SoCal]

For a sec there I thought you were getting tech savy and posting your own pics Scott! :lol: Good to see the car coming along!

[wheelsup351]

http://i907.photobucket.com/albums/ac278/kustomcarguy/IMG_0227.jpg:unibrow:


Tom


:( should have put a racepak in. looks a million times cleaner.

here is my buddy's car. the entire stock style dash is fiberglass. that car went 187 mph on a 8.5 tire. :hail:

http://www.popularhotrodding.com/features/0911phr_1973_chevy_camaro/photo_03.html

http://image.popularhotrodding.com/f/30995823+w750+st0/0911phr_03_z+1973_chevy_camaro+steering_wheel.jpg

http://image.popularhotrodding.com/f/30995847+w750+st0/0911phr_11_z+1973_chevy_camaro+interior.jpg

[skatinjay27]

haha^^^^^^^^^^^ nice post...:rolleyes:

[70rs]

haha^^^^^^^^^^^ nice post...:rolleyes:

My thoughts as well.......

[coolwelder62]

:( should have put a racepak in. looks a million times cleaner.

here is my buddy's car. the entire stock style dash is fiberglass. that car went 187 mph on a 8.5 tire. :hail:

http://www.popularhotrodding.com/features/0911phr_1973_chevy_camaro/photo_03.html

http://image.popularhotrodding.com/f/30995823+w750+st0/0911phr_03_z+1973_chevy_camaro+steering_wheel.jpg

http://image.popularhotrodding.com/f/30995847+w750+st0/0911phr_11_z+1973_chevy_camaro+interior.jpgWanted a race pak,BUT about $450.00 bucks past my budget.Plus I still kinda like the Autometer Ultralite's face's.:thumbsup:Maybe the next project will get a racepak.

[coolwelder62]

Very, very cool project! Please keep the updates coming.

Scott, I would like to talk with you about making a duplicate dash insert and lower dash. Just the metal, no gauges, vents or switch gear. But with all of the openings cut and dimples formed.
Im in no rush, I know you have your hands full.
Maybe a few other items as well?Eric,As soon I get a quick chance I will make some drawing's and will be ready to fab up the part's as soon as you are ready.:thumbsup: Scott

[70rs]

Eric,As soon I get a quick chance I will make some drawing's and will be ready to fab up the part's as soon as you are ready.:thumbsup: Scott
Anyone ever tell you that you are the MAN!! Thanks Scott!

[coolwelder62]

Anyone ever tell you that you are the MAN!! Thanks Scott!Could you email this quote to my wife.:lol: Although I don't think she would belive either.:_paranoid

[70rs]

Could you email this quote to my wife.:lol: Although I don't think she would belive either.:_paranoid

I'm on it Scott!

Whats the latest on the camaro? That is one killer car you built.
Lots of ideas floating around in my head for my project.
And, lots of other stuff I would like to talk to you about fabricating for me.:cheers:

[coolwelder62]

My good friend Ken Verncyk is here at the house right now working on the wiring.I have been running wires though out the chassis all week.Really not much to look at right now. But as thing's progress I will have RadRambler Tom post up some king size photo's.:thumbsup:

[coolwelder62]

The wiring is about finished under the dash,all that left is out at the head light's.Hopefully will be trying to start the motor this next weekend.Will have Tom post up some photo's.:thumbsup:

[ma73z]

Have him post lots of photos :D can't wait to see it

[ma73z]

Hey Scott any updates for us?

[coolwelder62]

Well I got drug out to the Heidt's muscle car thing this week end so it will be next week before I can get back on the orange trud.Kevin may have broke his clutch or motor so it will be awhile before I have too leave home so I should have some time to finish it.:lol: I have some photo's of the dash installed,but after seeing the Roadster shops new nova I dont know why anyone would to look at my stuff.It's pretty plain.:_paranoid

[ma73z]

Sucks to hear about Kevin's car but you guys will get it fixed and it'll be better than ever. I know I'm not the only one who'd like to see more pics of whatever you've done lately and I personally am a fan of your dash. :cheers: Matt

[Vegas69]

Us simpletons can't aspire to the likes of RS. We need something that is achievable to keep the fire burning. Builds like DSE, RS, JCG just make me shut my lap top up with my tail between my legs. ;)

[coolwelder62]

Us simpletons can't aspire to the likes of RS. We need something that is achievable to keep the fire burning. Builds like DSE, RS, JCG just make me shut my lap top up with my tail between my legs. ;)Todd, it's really is hard to belive that the mass'es would rather look at what I have done vers's the R-S,DSE,RingBros,JCG.I really like lookin at everything being built.I try and check every build going on.I see good thing's going on W/almost every build here on later-g and P-T.com.Some car's being built are just be on me how they do it.I don't close my lap top, it just give me a head ache.:lol: :thumbsup:

[RECOVERY ROOM]

I myself like real world builds, There the cars that keep the hobby/business going forward. I have just as much fun working on those type of cars as we do on the high end builds. I think your car is looking great.

[coolwelder62]

I myself like real world builds, There the cars that keep the hobby/business going forward. I have just as much fun working on those type of cars as we do on the high end builds. I think your car is looking great.Thank's Tracy.I hate to say it but some of your interior work is so insane and nice it also give's me a throbbing head ache.:thumbsup: Scott M.

[RECOVERY ROOM]

:rofl: :rofl: :rofl: :rofl: ^^^^. Thanks

[radrambler]

http://i907.photobucket.com/albums/ac278/kustomcarguy/IMG_0365.jpg
http://i907.photobucket.com/albums/ac278/kustomcarguy/IMG_0364.jpg
http://i907.photobucket.com/albums/ac278/kustomcarguy/IMG_0363.jpg

more eye candy from Scott mocks shop

Tom

[ma73z]

Looking good thanks for the photos :D

[waynieZ]

Very Nice.

[tones2SS]

The dash and gauge cluster look great.

[cencalc6]

Very Nice!

[coolwelder62]

Thank's guy's.Just need to finish plugging the dash harness togather and zip trying everything up in place & finish laying down the fat mat sound deadner.Then the carpet can go in.Can't wait to start the motor get the frt. end alined then I can blast down thur the corn field.:lol:Will try and give Tom more photo's to post.

[56pickup]

Looking good scott! :thumbsup:

[camcojb]

great job my friend. :thumbsup:

[Rick D]

Looking good Scott!! I don't remember reading what kind of HP is your motor got?

[coolwelder62]

great job my friend. :thumbsup:Thank's Jody.:thumbsup:

[coolwelder62]

Looking good Scott!! I don't remember reading what kind of HP is your motor got?It's a stock 400hp LS2.I wish I could aford more.But I still have 2 kids at home and one starting college so I need to stay on a budget.:thumbsup:

[Rick D]

Hay thats not bad, sure we all want Marks 800 Hp motor but like you said budget. Thats the best way to build a car unless you have unlimited funds, then I'm going over RS and have them build me a car :unibrow: Oh and please keep the pictures coming, i for one love to look at what you are doing. Sure I like to look at what the Pro top shops are doing I look at JGC, RS, DSE all the time to find different ways help my car look better. But I really like to see the home built cars or at least the ones built by the guys that do it because they love to build cars not just make money. Not saying that the pro builders do not love what they do, they have to too turn out the cars that are coming out of these shops today, but they also still have to make money. So please keep the pictures coming:thumbsup:

[coolwelder62]

Hay thats not bad, sure we all want Marks 800 Hp motor but like you said budget. Thats the best way to build a car unless you have unlimited funds, then I'm going over RS and have them build me a car :unibrow: Oh and please keep the pictures coming, i for one love to look at what you are doing. Sure I like to look at what the Pro top shops are doing I look at JGC, RS, DSE all the time to find different ways help my car look better. But I really like to see the home built cars or at least the ones built by the guys that do it because they love to build cars not just make money. Not saying that the pro builders do not love what they do, they have to too turn out the cars that are coming out of these shops today, but they also still have to make money. So please keep the pictures coming:thumbsup: Rick,I do it for the money.I don't want to sell my project's unless I get a little something for my labor.I have all ready had 2 offer's for this car for around what I have invested in it.But I can't sell it for that.I think my labor is worth a little bit.So yes I love the build,I set up at nigth thinking about what to do next.By trying to make a little money at the end also helps me build the next one a little nicer.I am thrilled some of you folk's like what I am doing.Thay car really look'sbetter in real life than it does in the photo's I am sending to Mr. Tom to post.The lighting in my shop is not that great and can't take good photo to save my A==.Going to start installing the sheet metal this week end so maybe it will atart looking a little better.:thumbsup:

[Cris@JCG]

Car is looking good Scott! Looking forward to seeing you completed.:thumbsup:

[Ron in SoCal]

It's a stock 400hp LS2.I wish I could aford more.But I still have 2 kids at home and one starting college so I need to stay on a budget.:thumbsup:

Car's looking good and nothing wrong with an LS2 Scott! L92/LS3 heads a cam and a tune and you're well north of 500hp...:thumbsup:

[coolwelder62]

Car's looking good and nothing wrong with an LS2 Scott! L92/LS3 heads a cam and a tune and you're well north of 500hp...:thumbsup:No,I will let the next owner upgrade the horsepower.I will just finish the car and tune the chassis.That way if someone just's want's a great driving camaro it's already to go.But if they want something to go out and run w/the fast group all they have to do is the motor work you discribed and they are in the ballpark.:thumbsup:

[WSSix]

No,I will let the next owner upgrade the horsepower.I will just finish the car and tune the chassis.That way if someone just's want's a great driving camaro it's already to go.But if they want something to go out and run w/the fast group all they have to do is the motor work you discribed and they are in the ballpark.:thumbsup:


That's the better way to do it if the plan is to be willing to part with the car eventually. Sort it out and prove it's reliable and built right. The last thing you need is some jack wagon complaining because you put a lumpier cam in there than they are happy with.

Keep up the good work Scott.

[coolwelder62]

That's the better way to do it if the plan is to be willing to part with the car eventually. Sort it out and prove it's reliable and built right. The last thing you need is some jack wagon complaining because you put a lumpier cam in there than they are happy with.

Keep up the good work Scott.I am Lucky, I have had only one of those.The last 2 customer's have ben awesome to work with.I am always trying to improve on my build's.I have 2 new one's in the planning stage's right now.Just trying to follow in the foot step's of MS.

[RECOVERY ROOM]

Thank's Tracy.I hate to say it but some of your interior work is so insane and nice it also give's me a throbbing head ache.:thumbsup: Scott M.

Bring one up, I'll put a interior in one for ya, I'll give ya some aspirin to :thumbsup:

[coolwelder62]

Bring one up, I'll put a interior in one for ya, I'll give ya some aspirin to :thumbsup:I have a project in mind that might be right up your alley.We should talk sometime.:thumbsup:

[Mach2]

Hey Guys, Me, Dad and My little brother busted butt today and got the car running. Theres a few little bugs to work out and bleed the brakes and it should be ready for its maiden voyage! Below is a link to youtube video of the car starting. STAY TUNED! :lateral: :thumbsup:

http://www.youtube.com/user/Weldpro2011?feature=mhee

[Rick D]

Motor sounds strong, must feel great to get to this point Scott. Man I just love LS motors. :cheers: :woot:

[coolwelder62]

Motor sounds strong, must feel great to get to this point Scott. Man I just love LS motors. :cheers: :woot:Thank's Rick.My 2 younger boy's were a big help yesertday.Pitched right in and gotter done.Feel's like I'm on the down hill side now.It's been a long 9 month's to get to this point.Now try and get the frt/ sheet metal on it so it will start lookin like a camaro again.:thumbsup: Scott

[radrambler]

Thank's Rick.My 2 younger boy's were a big help yesertday.Pitched right in and gotter done.Feel's like I'm on the down hill side now.It's been a long 9 month's to get to this point.Now try and get the frt/ sheet metal on it so it will sart lookin like a camaro again.:thumbsup: Scott

HANG THE METAL...:thumbsup:
ITS ALLLLLLIVE:woot:

TOM

[70rs]

:thumbsup: :thumbsup: :thumbsup: :thumbsup:

[WSSix]

needs more cam, lol. :D Congrats on getting it running :thumbsup: :thumbsup:

[TorqDork]

Scott,

Glad to see you got it running!:thumbsup:

Still need to chat about the Camaro and the AMX. You were going to call last week!

Mike
http://i1237.photobucket.com/albums/ff476/torquedork/78%20Trans%20Am/SIG2E.jpg

[coolwelder62]

needs more cam, lol. :D Congrats on getting it running :thumbsup: :thumbsup:I know,That's what everybody keep's telling me.But,My wife will be driving the car until I sell it.So it need's to smoothly.:unibrow:

[radrambler]

http://i907.photobucket.com/albums/ac278/kustomcarguy/IMG_0431.jpg
http://i907.photobucket.com/albums/ac278/kustomcarguy/IMG_0435.jpghttp://i907.photobucket.com/albums/ac278/kustomcarguy/IMG_0434.jpg

:thumbsup:
Tom

[ma73z]

Oh yeah I like, Scott please don't sell this one before the KCGG show, I'd really like to see it in person :yes:

[coolwelder62]

It might hard to to keep this one.I have 2 people making offer's as we speak.But I am going to hold out long enough to get to KC.GG.:thumbsup:

[Rick D]

Lookin good there Scott, can't wait to this one finished up. Also got tied up with work last week, I will call you this week. :thumbsup:

[tazzz2_ca]

Looking good buddy....