Log in

View Full Version : 5.7/6.1 HEMI to GM trans adapter


DRJDVM's '69
05-14-2010, 06:13 PM
6.1/5.7 L HEMI to GM transmission adapter $500
Wanna bolt your new monster 6.1 L HEMI to a transmission that can actually handle the abuse? Lets face it, a lot of the Mopar trans just aren’t as good as the GM transmissions out there. Its so much easier to build a GM trans that can be beat on without mercy……so why mess with a weaker Mopar transmission?
This adapter will allow you to mate ANY GM automatic transmission to a modern 3G 6.1 or 5.7 L HEMI. It bolts between the trans and motor, and places the starter on the driver side. The kit has been used for mock-up only (so its never been run) and includes the adapter, flywheel, spacer and ALL of the original hardware to mount the adapter and transmission. The adapter is about ¾ inch thick. These kits retail for $660.
You can see a similar kit here…….http://www.transmissionsone.com/ you need to scroll down the page about 75-80% of the way down. I bought it directly through Bowler Transmission http://bowlertransmissions.com/ in Feb 2008, but have since decided to go with a manual transmission. My loss is your gain……
Location Manteca CA 95337, buyer pays shipping
Contact [email protected]
http://i229.photobucket.com/albums/ee264/DRJDVM95/FOR%20SALE/IMG_5164.jpg