xssive99
11-15-2009, 04:07 PM
http://i37.tinypic.com/e00iab.jpg
http://i34.tinypic.com/nd0vf5.jpg
http://i35.tinypic.com/28w2n0o.jpg
Forged 347 Shortblock - 0 miles! 2100$ Plus shipping
Fresh LS1 Block, decked, align honed, Bored to 3.905"
Balanced rotating assembly
Scat 6.125" H Beam rods / 8740 Rod bolts
Mahle -18cc Forged Pistons
Arp Main studs
Fresh L92 58x crankshaft (easily run on 24x crank signal with : http://www.lingenfelter.com/mm5/merchant.mvc?Screen=PROD&Store_Code=LPE&Product_Code=L460065397&Category_Code=C163)
Valley Cover included
Built for boost!
Main bearing Clearances:
1 - .0020"
2 - .0020"
3 - .0020"
4 - .0021"
5 - .0021"
All the rods had a clearance of .0021"
Pistons .0012" out of the hole
Assembled with All clevite bearings, new cam bearings.
Brand New Trick Flow Cam - 0 Miles.
228/230 .585"/.585" on 112 LSA
Sold!
http://i34.tinypic.com/nd0vf5.jpg
http://i35.tinypic.com/28w2n0o.jpg
Forged 347 Shortblock - 0 miles! 2100$ Plus shipping
Fresh LS1 Block, decked, align honed, Bored to 3.905"
Balanced rotating assembly
Scat 6.125" H Beam rods / 8740 Rod bolts
Mahle -18cc Forged Pistons
Arp Main studs
Fresh L92 58x crankshaft (easily run on 24x crank signal with : http://www.lingenfelter.com/mm5/merchant.mvc?Screen=PROD&Store_Code=LPE&Product_Code=L460065397&Category_Code=C163)
Valley Cover included
Built for boost!
Main bearing Clearances:
1 - .0020"
2 - .0020"
3 - .0020"
4 - .0021"
5 - .0021"
All the rods had a clearance of .0021"
Pistons .0012" out of the hole
Assembled with All clevite bearings, new cam bearings.
Brand New Trick Flow Cam - 0 Miles.
228/230 .585"/.585" on 112 LSA
Sold!