John's 68 Camaro "Bloodline"

[DETON8R]

Yes but he is redoing a lot of the previous work. It is 99% done and should be at GG in March.

Good to hear you are going to get it done and reveal at the Good Guys show. Can't wait to see it in Pleasanton. Been a long time coming!!!

[John510]

Good to hear you are going to get it done and reveal at the Good Guys show. Can't wait to see it in Pleasanton. Been a long time coming!!!

Well It BETTER be there. If its not at this show then Ill be pretty pissed off.

[U-turn]

Well It BETTER be there. If its not at this show then Ill be pretty pissed off.


Hahahahaha, think we all have been to that point.

[DETON8R]

Well It BETTER be there. If its not at this show then Ill be pretty pissed off.

Is the car there this weekend?
Do you know what booth number or location were it will be shown?
And are you going to be there with it?

[John510]

Negative. Supposed to rain.

[Vince@Meanstreets]

Sunday is going to be the day!!!!

[flashlight holder]

Hey, Did your car ever make it on the road?

[John510]

yea but I promised I wouldn't post pics yet.

[Rick D]

yea but I promised I wouldn't post pics yet.

Why not John???

[Ron in SoCal]

John that's against the :rules:

[Vince@Meanstreets]

most likely debuting at a show.

[John510]

most likely debuting at a show.

yup!

[Richio1]

Oh the anticipation... Can't wait to see it.

WCN's next month?

[John510]

Sneak peak of the engine bay. The close out panel will eventually be painted black. Chris is freekin awesome!

http://i527.photobucket.com/albums/cc352/JohnS510/9EEC7756-394B-4242-91E3-99E70F14F7B5_zpsc8aqv3pj.jpg (http://s527.photobucket.com/user/JohnS510/media/9EEC7756-394B-4242-91E3-99E70F14F7B5_zpsc8aqv3pj.jpg.html)

[glassman]

Looks awesome!! Full steam ahead....

Sooooo close....hope to see it there....

[John510]

Thanks! It will be there inside one of the buildings. After the show it gets tuned and all the kinks worked out.

[Spiffav8]

Nice! Love the close out panel. Cant' wait to see it in person.

[Vince@Meanstreets]

awesome work!!

[Swain]

P town this weekend? We will be there

[89 RS]

Looks awesome!

[waynieZ]

Swet!

[Vince@Meanstreets]

Sneak peak of the engine bay. The close out panel will eventually be painted black. Chris is freekin awesome!

http://i527.photobucket.com/albums/cc352/JohnS510/9EEC7756-394B-4242-91E3-99E70F14F7B5_zpsc8aqv3pj.jpg (http://s527.photobucket.com/user/JohnS510/media/9EEC7756-394B-4242-91E3-99E70F14F7B5_zpsc8aqv3pj.jpg.html)

the rock approves, as do I

http://olivethepeople.com/wp-content/uploads/2013/11/applause-gif.gif

[tubbed69]

Nice! Love the close out panel. Cant' wait to see it in person.

Very nice John:king:

[Rick D]

Looking great John!! :king:

[Al Moreno]

Looks AWESOME John! :cheers:

[Lenie]

Pics from the gg show?

[DETON8R]

Hey John, saw the car today. Freak'in Awesome. Didn't see you though.

And I saw a tag on the console with an Innovation Award. Do tell when you have the details.

[John510]

Thanks. I wasn't able to make it out there today (its my Anniversary and wife said no cars today) but Chris From West Coast Auto Craft let me know that we won an Innovation award. Awesome!!! The car is coming out amazing. I can't wait to get a video of it at the tuner. Here are a couple of shots of it from the show. I probably should have taken them from a real camera since they came out a little dark with the iPhone.


http://i527.photobucket.com/albums/cc352/JohnS510/44456B37-8EB4-40E0-855C-F3AE9E505D09_zpszej38ec2.jpg (http://s527.photobucket.com/user/JohnS510/media/44456B37-8EB4-40E0-855C-F3AE9E505D09_zpszej38ec2.jpg.html)
http://i527.photobucket.com/albums/cc352/JohnS510/3BB905D0-8993-481E-85DA-126B48D72DEE_zpsp5bouz4m.jpg (http://s527.photobucket.com/user/JohnS510/media/3BB905D0-8993-481E-85DA-126B48D72DEE_zpsp5bouz4m.jpg.html)
http://i527.photobucket.com/albums/cc352/JohnS510/7E19276E-62E2-4680-A71D-D806A3E577FB_zpsbwguswtp.jpg (http://s527.photobucket.com/user/JohnS510/media/7E19276E-62E2-4680-A71D-D806A3E577FB_zpsbwguswtp.jpg.html)
http://i527.photobucket.com/albums/cc352/JohnS510/8E699EE0-9792-4D81-94A5-4552777BD66B_zps66lap4lb.jpg (http://s527.photobucket.com/user/JohnS510/media/8E699EE0-9792-4D81-94A5-4552777BD66B_zps66lap4lb.jpg.html)
http://i527.photobucket.com/albums/cc352/JohnS510/8C3EFEB3-4495-4707-8861-9C03F946F345_zps7wmijd0o.jpg (http://s527.photobucket.com/user/JohnS510/media/8C3EFEB3-4495-4707-8861-9C03F946F345_zps7wmijd0o.jpg.html)

[tubbed69]

Great job John,congrats on the award.Car is amazing:king:

[Vince@Meanstreets]

Way to go John!!

[WSSix]

Congrats on the award and the anniversary, John!

[Smitty68]

Awesome build!!! :king:

[Richio1]

Congrats John, good for you! Its well deserved.

First of many I'm sure.

[John510]

Thanks everyone. Ill post more pics as the car gets along.

[flashlight holder]

Congratulations on the Award. Sorry I missed that show...sure would love to see that car move on its own power.

What's the deal with the hood prop holding up the hood? Did the hood hinge shocks go out already? How does the hood stay closed...I don't see the front hood latch?

Can't wait to see a Video of the car running and driving around.

Joe

[GregWeld]

Here are a couple of shots of it from the show. I probably should have taken them from a real camera since they came out a little dark with the iPhone.


John --- If you touch the screen on the iPhone where it's dark (or light) before taking the picture... it will adjust the light. So try just touching it in various places where there are light and dark spots and see what it does - and when you find the right "light" then snap the photo.

Car looks great and congrats on the award!

[Vince@Meanstreets]

Congratulations on the Award. Sorry I missed that show...sure would love to see that car move on its own power.

What's the deal with the hood prop holding up the hood? Did the hood hinge shocks go out already? How does the hood stay closed...I don't see the front hood latch?

Can't wait to see a Video of the car running and driving around.

Joe

Thats an old car show trick....the hinge springs or shocks don't support the hood low enough to see both the engine and hood details. So you gotta prop.
We use to drill a hole in the hinge so you can install a temporary pin but after several damaged hoods from people forgetting about the pin it was a bad idea. Even with the remove before flight tag.

Car looks great and sounds even better John.

[flashlight holder]

I remembered after posting my comment that their are no shocks on the hood hinges. I still don't see any hood latch cut out in the new radiator support cover.

Can't wait to hear it run...

[John510]

There is no hood latch (well visible at least). Its a secret on how it stays closed. :headscratch:

We did end up taking home another award at a small local show. WooHoo!!!

http://i527.photobucket.com/albums/cc352/JohnS510/A149C5EE-846D-4E26-ABD6-632F2762BAC7_zpsxuajgdxe.jpg (http://s527.photobucket.com/user/JohnS510/media/A149C5EE-846D-4E26-ABD6-632F2762BAC7_zpsxuajgdxe.jpg.html)

[Vince@Meanstreets]

way to go John......don't start being a show queen now.

[waynieZ]

Congratulation's John The car came out great.

[Chassisworks]

Congrats on the awards, John!

Looking at that last trophy I feel educated; I didn't realize that someone was producing Camaros and Firebirds in 1964...

[Flash68]

Looking at that last trophy I feel educated; I didn't realize that someone was producing Camaros and Firebirds in 1964...

:lol:

[Ron in SoCal]

They were spelled 'C a m e r o' back then

[John510]

Its been a while so I figured I would post some updates. The Holley EFI and RFID kit are all sorted out finally. The dual throttle bodies are working also. Spintech exhaust installed and all spark plug coils, wiring, etc is hidden in the cowl. E-stop emergency brake installed. Oh and SHE FIRES NOW! I'll have a sound clip soon.


http://i527.photobucket.com/albums/cc352/JohnS510/CDCCE913-42FE-4393-96C6-57BCE52A6002_zpshqfxgs4y.jpg (http://s527.photobucket.com/user/JohnS510/media/CDCCE913-42FE-4393-96C6-57BCE52A6002_zpshqfxgs4y.jpg.html)
http://i527.photobucket.com/albums/cc352/JohnS510/D2D7E098-012F-454F-8EC9-99B97C270309_zpsnfht6trq.jpg (http://s527.photobucket.com/user/JohnS510/media/D2D7E098-012F-454F-8EC9-99B97C270309_zpsnfht6trq.jpg.html)
http://i527.photobucket.com/albums/cc352/JohnS510/1E42299E-F795-49D5-97A0-FF3B0C2A60A5_zpsgpyl5o7p.jpg (http://s527.photobucket.com/user/JohnS510/media/1E42299E-F795-49D5-97A0-FF3B0C2A60A5_zpsgpyl5o7p.jpg.html)
http://i527.photobucket.com/albums/cc352/JohnS510/849EB570-2A26-4F3A-B059-644D10513F2D_zpspnbco2cr.jpg (http://s527.photobucket.com/user/JohnS510/media/849EB570-2A26-4F3A-B059-644D10513F2D_zpspnbco2cr.jpg.html)
http://i527.photobucket.com/albums/cc352/JohnS510/10FE57A8-06F8-459B-A9FE-8780A656B5C5_zpsnyix9eme.jpg (http://s527.photobucket.com/user/JohnS510/media/10FE57A8-06F8-459B-A9FE-8780A656B5C5_zpsnyix9eme.jpg.html)

[Vince@Meanstreets]

Looking good John, did you go up there?


let me know if you need a set of sub frame connectors installed...I know a guy.

[John510]

Looking good John, did you go up there?


let me know if you need a set of sub frame connectors installed...I know a guy.

Didnt go up there yet. Your right I just realized that I do not have any subframe connectors. My car is going to twist the first time I rip on it.

[WSSix]

Congrats on getting it running, John!

[waynieZ]

It looks great John! Nice work.

[Rick D]

Glade to see it almost finished John!! Let's see a clip of it running??

[John510]

Thanks guys. I will post a video soon. The one video I have is not clear enough to post.

[Vince@Meanstreets]

Thanks guys. I will post a video soon. The one video I have is not clear enough to post.

put it up....I just wanna hear it

[DETON8R]

Thank you for update photos!! :thumbsup:

Interesting way to route the plug wires. Hadn't thought of that. Definitely hides the coils and wires.

I recall that you were looking for photos to route the exhaust out the back of the car. Are those dumps at the axle permanent?

OK, here's the never ending question, when does it drive??!!??

Sorry Man, had to ask... Thanks again for the PICS !!

CHEERS !!

[John510]

Thank you for update photos!! :thumbsup:

Interesting way to route the plug wires. Hadn't thought of that. Definitely hides the coils and wires.

I recall that you were looking for photos to route the exhaust out the back of the car. Are those dumps at the axle permanent?

OK, here's the never ending question, when does it drive??!!??

Sorry Man, had to ask... Thanks again for the PICS !!

CHEERS !!

Going to be a PITA to change but hey it looks awesome for shows and thats what I was going for. Dumps are permanent. I wanted that rumble in your chest kinda sound. LOL . Should be driving in a week or 2. Just need to go get some lic plates for it.

[Al Moreno]

Great job John and congrats on getting her started. Shouldn't be much longer.

[RdHuggr68]

You have that beast running yet?????????
:G-Dub: :gitrdun:

[spode]

put it up....I just wanna hear it

Ended up getting spintechs :headspin: too. I'm a long way from starting mine but would love to hear what yours sounds like.

[John510]

It was dropped off at the tuner today. Hopefully they can get it done tomorrow and give me the video so I can post it up. Im curious to see how much hp that Ozmo will give.

[Frankenstine]

Sweeeeeet With those Spin Tech's and dumps this Beast should be LOUDDDDD, cant wait for the video/sound clips Great work John,,,,,,,, Good luck with the tune. :thumbsup: :popcorn2:

[Justin@EntropyRad]

There is no hood latch (well visible at least). Its a secret on how it stays closed. :headscratch:

We did end up taking home another award at a small local show. WooHoo!!!

http://i527.photobucket.com/albums/cc352/JohnS510/A149C5EE-846D-4E26-ABD6-632F2762BAC7_zpsxuajgdxe.jpg (http://s527.photobucket.com/user/JohnS510/media/A149C5EE-846D-4E26-ABD6-632F2762BAC7_zpsxuajgdxe.jpg.html)

Nice! i used to go to that show quite a bit!

[John510]

Dyno is down for service but here she is untuned. Hope to get a dyno video up by next week. Spintechs and dumps are super loud but sound sooooo good. Im just glad its running!


By7sEcu2eUs&

[65 347]

Oh hell yea! Looks and sounds great!

Mike

[67RSRAG]

sounds great!! are you going to be doing a speed density tune or will you br going with a MAF(s) tune? Also curious how do you control both Throttle bodies at the same time? did you splice the TB wires or what? I love the look!!

[Vince@Meanstreets]

Another check on your wing. You broke the Borelli dyno!! Sounds bad ass

[John510]

sounds great!! are you going to be doing a speed density tune or will you br going with a MAF(s) tune? Also curious how do you control both Throttle bodies at the same time? did you splice the TB wires or what? I love the look!!

The Holley Dominator computer comes with a harness to connect two throttle bodies electronically through the computer. I think he is doing a speed density tune since there is no MAF sensor.

Thanks for the good words everyone. I can't wait until its tuned and all put back together. My neighbors are going to hate me.

[Richio1]

Good for you John

[Vince@Meanstreets]

The Holley Dominator computer comes with a harness to connect two throttle bodies electronically through the computer. I think he is doing a speed density tune since there is no MAF sensor.

Thanks for the good words everyone. I can't wait until its tuned and all put back together. My EX-neighbors are going to hate me.


FIFY brother

[Frankenstine]

Hey John, Congrats on the start up :thumbsup: can't wait to hear it tuned and a walk around video when finished, looking good sounding good
:thankyou:
Keith

[Swain]

That sounds awesome. Congrats

[califconstruct]

Looks and sounds killer!.. :popcorn2:

[DOOM]

Nice to hear it run John!

[tones2SS]

Very nice John.
She is sounding beastly.

[John510]

Doh! The car blew out the Currie differential on the Dyno this morning. New parts coming monday then its time to let it rip again!

:hairpullout:

[Vince@Meanstreets]

Doh! The car blew out the Currie differential on the Dyno this morning. New parts coming monday then its time to let it rip again!

:hairpullout:

dyno pay back for breaking it :twak:

sucks!!!!

[Richio1]

John, that sucks. Chris said its putting out some good numbers. You gotta be excited.

[John510]

New rear differential in. Dyno time tomorrow morning!:tv_happy:

[67RSRAG]

I haven't the specs on the motor what is your prediction?

[waynieZ]

Kick butt John ! Good luck tomorrow.

[John510]

I haven't the specs on the motor what is your prediction?

Im hoping at least 550 flywheel

[waynieZ]

Looking forward to seeing a video and some results.

[John510]

Stay tuned tonight for the video. Run 3 hit 513 rwhp.

http://i527.photobucket.com/albums/cc352/JohnS510/DCAA6D0E-1ED6-4FD8-9ACA-C4055A7F6F7D_zpscxwmylzi.jpg (http://s527.photobucket.com/user/JohnS510/media/DCAA6D0E-1ED6-4FD8-9ACA-C4055A7F6F7D_zpscxwmylzi.jpg.html)

[Vince@Meanstreets]

your around 570-590 HP. not bad. :D

see if he can get a driveline drag number for you. should have a coast test in his program.

[Richio1]

Im hoping at least 550 flywheel

HaHa... being a little conservative weren't we... :unibrow:

That's awesome John.

[John510]

Dyno Video is up!

excuse my language at the end I got a little excited when I saw the 513hp!

w4gXJJ44hJs

[camcojb]

That'll be fun, congrats!!!

[waynieZ]

Congratulation's John! Nice numbers..

[RdHuggr68]

Thats great John, now you have all summer to play! :relax:

[Ron in SoCal]

That is a spectacular result for cam and monster intake only. Be mindful of excessive bends when you put intake tubes and filters on. Dale lost 40 hp I believe with one 90* bend.

Congrats John :cheers:

[67RSRAG]

Great numbers for your upgrades. Get your heads reworked and you will get close to your prediction. :thumbsup:

[Intimidator3]

Great numbers for your upgrades. Get your heads reworked and you will get close to your prediction. :thumbsup:

:y0!:
Actually, his prediction at around 550 was at the flywheel. Remember, with manual transmission, you lose about 15% of the flywheel horsepower (about 20% for auto) So since the was rear wheel horsepower, at 513, that means the flywheel HP is close to 600 HP. So it actually exceeded his predictions!
600 HP X .85 = 510HP. That sound about right?

Either way, that thing is a beast!
:king:

[Intimidator3]

your around 570-590 HP. not bad. :D

see if he can get a driveline drag number for you. should have a coast test in his program.

Yeah, this is probably about right, actually. :)

[Vince@Meanstreets]

Yeah, this is probably about right, actually. :)

Dyno jet has a parasitic drag test that is very accurate. We built a Drag Nova a few years back, had the engine dyno tuned then ran it on the chassis dyno and the parasitic loss test was right on the money.

[John510]

Ill ask him about the parasitic drag tomorrow when they run it again. They told me to multiply the rwhp by 1.25 because of the 9" rear end. I guess it takes more power than the 12 bolt

[DETON8R]

Awesome Video John!!
Good to see it is alive and SCREAMING!!

Are they going to tune on it some more? Just wondering if there is any more HP that they can get with some more tuning??

I'm envious. I'm too busy rebuilding a front end on an S10 4x4 with Junior, so I have not had much time to devote to my project.

[John510]

Awesome Video John!!
Good to see it is alive and SCREAMING!!

Are they going to tune on it some more? Just wondering if there is any more HP that they can get with some more tuning??

I'm envious. I'm too busy rebuilding a front end on an S10 4x4 with Junior, so I have not had much time to devote to my project.

Yes tomorrow they are tuning it some more and going to send me a video. Ill post up if there is any more power in it.

[tubbed69]

John those are really good numbers,Awesome Build,time to enjoy it:king:

[67RSRAG]

Im hoping at least 550 flywheel

I misread it sorry. I am sure with some head work you can come close to 550 RWHP!! nonetheless great job, looks killer and has the bite to back it.:thumbsup:

[John510]

He squeezed more out of it today. 527 rwhp 462 torque!!!!

https://m.youtube.com/watch?v=Ks1NTN1n_hY&feature=youtu.be

[Intimidator3]

Suh-weet!:thumbsup:

[waynieZ]

Nice John.

[Swain]

Very nice sounds killer

[Vince@Meanstreets]

Wekid!!!! You can get tail pipes through there! :welder:

[WSSix]

Very nice, John. Congrats! I'm envious of that torque curve. That's the type of curve I'm shooting for.

[snappytravis]

sweet ride John!

[John510]

thanks. I should have some more pics in 2 weeks after the roll bar gets here and installed and everything put back in the car.

[John510]

Figured I would do some updates since its been a while. Tigercage is installed and WCAC will be making a custom roll bar cover out of leather to match the rest of the interior. The subframe connectors are installed. I regretted shaving the gas filler on the rear of the car so Chris is installing the ride tech gas cap.

http://i527.photobucket.com/albums/cc352/JohnS510/E3BCA015-33FA-4F94-B74E-8A4ADDD83C9A_zpsjlbgwank.jpg (http://s527.photobucket.com/user/JohnS510/media/E3BCA015-33FA-4F94-B74E-8A4ADDD83C9A_zpsjlbgwank.jpg.html)
http://i527.photobucket.com/albums/cc352/JohnS510/5A02F8A2-BE57-4375-960E-43C922184E18_zpsmdeyq54i.jpg (http://s527.photobucket.com/user/JohnS510/media/5A02F8A2-BE57-4375-960E-43C922184E18_zpsmdeyq54i.jpg.html)
http://i527.photobucket.com/albums/cc352/JohnS510/CDE46228-E358-4457-8BE0-5B5F46084850_zpsyfzzntlt.jpg (http://s527.photobucket.com/user/JohnS510/media/CDE46228-E358-4457-8BE0-5B5F46084850_zpsyfzzntlt.jpg.html)

[waynieZ]

The car is looking sweet. I like the Ride Tech fill cap, it's a nice piece.

[Vince@Meanstreets]

Ben Hermance is the one who made it black and I also asked Steve if I could use his rendering and change it because I like the stripe idea. If you dont like my car then click a different thread and hassle someone else. If I am the one spending 40-50K on a car then I will build it how I want regardless of whose car it ends up looking like. Hell, I guess every camaro now that buys Anvil carbon parts must be copying Motiv8r or Track Rat.

:rofl: oh its so funny looking back hu John?:D

[John510]

yeah… lol what 40-50k?

Id have pics but its taking waaaaaaaaaay too long to finish my car.

[John510]

Well she is done. Took her for a cruise out in the rain on Friday. It scares the heck out of me! Even with 12" wide rear NT55's it breaks loose in 4th gear. The power band is just insane.

http://i527.photobucket.com/albums/cc352/JohnS510/570804B8-866F-4A65-976E-94B5C3F80A1E_zpszfzgdgak.jpg (http://s527.photobucket.com/user/JohnS510/media/570804B8-866F-4A65-976E-94B5C3F80A1E_zpszfzgdgak.jpg.html)
http://i527.photobucket.com/albums/cc352/JohnS510/49BACE4E-5FB5-4795-9C77-A3F31C52ECE6_zpskjjqir22.jpg (http://s527.photobucket.com/user/JohnS510/media/49BACE4E-5FB5-4795-9C77-A3F31C52ECE6_zpskjjqir22.jpg.html)
http://i527.photobucket.com/albums/cc352/JohnS510/719653DB-B325-4071-808E-DC751D33A3A7_zps70jkbt2m.jpg (http://s527.photobucket.com/user/JohnS510/media/719653DB-B325-4071-808E-DC751D33A3A7_zps70jkbt2m.jpg.html)
http://i527.photobucket.com/albums/cc352/JohnS510/6A5FB348-2CA2-4D30-BCAE-92E2A7F741EC_zpsyur270md.jpg (http://s527.photobucket.com/user/JohnS510/media/6A5FB348-2CA2-4D30-BCAE-92E2A7F741EC_zpsyur270md.jpg.html)

[Vince@Meanstreets]

meh its ok :peepwall:

[Spiffav8]

How long did it take you to get out of that gas station with everyone stopping to look at the car and ask questions?

Looks like a lot of fun.

[tubbed69]

John you car is perfect,love that intake.Great Job with it,glad you got try it out:trophy-1302:

[John510]

meh its ok :peepwall:

:bigun2: Im gonna say that when the mustang is done. LOL

How long did it take you to get out of that gas station with everyone stopping to look at the car and ask questions?

Looks like a lot of fun.

That was my first time at a gas station with it. Every male there instantly flocked to the car like I was giving away free steaks or something.


John you car is perfect,love that intake.Great Job with it,glad you got try it out:trophy-1302:

Thanks!

[paulk68]

Increadible one of my favorite builds on here!!!

[awr68]

Awesome build! Congrats on getting it to the street! Very very cool! I love all the details...be very proud!

[Sonar Chief]

If I were there at the gas station you would still be there ...lol! Good to see it on the road :thumbsup:

Question: I see that you installed a HWY 22 kit in the trunk ... any issues with the extended wiring loom? Recommend or not?

Michael

[John510]

Increadible one of my favorite builds on here!!!

Thanks!

Awesome build! Congrats on getting it to the street! Very very cool! I love all the details...be very proud!

Thanks! Been a long 8 years in the making.

If I were there at the gas station you would still be there ...lol! Good to see it on the road :thumbsup:

Question: I see that you installed a HWY 22 kit in the trunk ... any issues with the extended wiring loom? Recommend or not?

Michael

I would recommend the wire harness. There were no issues. Only electrical issues we were having is the Advanced Keys RFID ignition system. That thing was a PITA to install.

[califconstruct]

Looking good man!..

[Vince@Meanstreets]

:bigun2: Im gonna say that when the mustang is done. LOL



Thanks!

about the Camaro? noooo you have waaaay more money in the Camaro build. :lmao:

Pop the hood and you would have been there for hours! LOL

[John510]

Thought I would give an update.

Car now has 650 miles on it. What a beast. The clutch was replaced along with the rear quarter panels repainted after I had round rod welded in where the rear wheels were rubbing the quarter lips.

My only complaint is I cannot hear the radio cause the car is too loud. LOL

I love it now!!!!

[DOOM]

That is great news John!:G-Dub:

[waynieZ]

Nice John, 650s a good start!

[John510]

Would anyone happen to know where this car is currently?