c.schulz
03-08-2009, 01:33 PM
Hey Guys, as you know the economy is just getting worse and worse. This is causing a pinch on all of us and its time for me to put things up for sale. So the camaro must go! Im sure I have lots of other parts that are original to the car. But this is the list off the top of my head
Chris
Photos at-- http://www.lateral-g.net/members/schulz/
71 body from Arizona, clean but with 30 years of abuse. Ive had to make up a patch for the pass. side quarter as junk was trapped in the extension and caused rust. Other quarter is dented from being backed into things. Can be saved. Body has been stripped and sealed. The body is very clean Arizona piece accept the items pointed out above.
Original RS upper and lower valance. Perfect lower I might add!!!
Urethane bumper 1 fiberglass and 1 original
New rear lower valance
New door skins on primer sealed doors.
New GM door hinges
2 sets of fenders 1 repro set and 1 set of factory, odd years
Goodmark steel cowl induction hood and an original hood.
Firewall has been welded closed and needs to be ground and finished
Sub frame, control arms have been acid dipped and E-coated
New repro rad support
2 Deck lids and 3 piece spoiler
Extra bumpers
Window trim and glass(Good shape)
Engine is a 355ci engine built by Powerline engines out of Arizona 425hp carb to pan. Motor has been only run no more than 100 miles. 2 piece rear main. 2.02 steel heads with cast crank and 2 bolt main.
Serpentine belt system from a F body car
1995 T-56 6 speed with 15,000 miles. Bell housing and fork also
Modified cross member to fit trans.
Rebuilt 10 bolt with Richmond gear 3:73 Factory posi style
Baer track system brakes. Factory spindles modified. PBR calipers and 13" up front and 12 in rear.
Global West suspension
175 lb leaf springs L-2
740 lb front springs- Semi Comp
600 lb Hotchkis frt. springs
Solid Aluminum body mounts
Del-A-Lum bushings for control arms and springs
1 Ό frt. sway bar & links
4 Koni adjustable shocks
New GM Quick ratio steering box
All new Moog steering parts
Interior
Adjustable Corbeau seats with lumbar bladders and slides.
Quarter trim, Door panel lowers, B pillar trim
1 Standard column and 1 tilt
Firm on $12500.00 Contact me at [email protected] for more info.
Photos at-- http://www.lateral-g.net/members/schulz/
71 body from Arizona, clean but with 30 years of abuse. Ive had to make up a patch for the pass. side quarter as junk was trapped in the extension and caused rust. Other quarter is dented from being backed into things. Can be saved. Body has been stripped and sealed. The body is very clean Arizona piece accept the items pointed out above.
Original RS upper and lower valance. Perfect lower I might add!!!
Urethane bumper 1 fiberglass and 1 original
New rear lower valance
New door skins on primer sealed doors.
New GM door hinges
2 sets of fenders 1 repro set and 1 set of factory, odd years
Goodmark steel cowl induction hood and an original hood.
Firewall has been welded closed and needs to be ground and finished
Sub frame, control arms have been acid dipped and E-coated
New repro rad support
2 Deck lids and 3 piece spoiler
Extra bumpers
Window trim and glass(Good shape)
Engine is a 355ci engine built by Powerline engines out of Arizona 425hp carb to pan. Motor has been only run no more than 100 miles. 2 piece rear main. 2.02 steel heads with cast crank and 2 bolt main.
Serpentine belt system from a F body car
1995 T-56 6 speed with 15,000 miles. Bell housing and fork also
Modified cross member to fit trans.
Rebuilt 10 bolt with Richmond gear 3:73 Factory posi style
Baer track system brakes. Factory spindles modified. PBR calipers and 13" up front and 12 in rear.
Global West suspension
175 lb leaf springs L-2
740 lb front springs- Semi Comp
600 lb Hotchkis frt. springs
Solid Aluminum body mounts
Del-A-Lum bushings for control arms and springs
1 Ό frt. sway bar & links
4 Koni adjustable shocks
New GM Quick ratio steering box
All new Moog steering parts
Interior
Adjustable Corbeau seats with lumbar bladders and slides.
Quarter trim, Door panel lowers, B pillar trim
1 Standard column and 1 tilt
Firm on $12500.00 Contact me at [email protected] for more info.