ASP "DC/Kalis" 69 camaro build.......

[phillym5]

You need to paint that intercooler black, it's distracting.

Tyler

I happen to like it. :P

[customcam]

Music to our ears! thanks for posting
You started a Flare revolution lol :thumbsup:

[fleet]

Don't mess with the twins! :D

[G-CODE]

See J, I knew all that talk about the "GBR" yesterday sparked a little interest in the Silver State...



I threw the gal on the dyno today to see exactly what she had been running the last few weeks in California. At a measly 8lbs of boost... and crappy California 91 octane... she put down 754 rwhp... and 726ft lbs torque.:thumbsup: Im pretty happy with that..... that is until we crank her up.:unibrow:

Now we are going to strip the front end off and put a more modern front sub under her. Then she has quite the schedule this spring. Some photo shoots... Goodguys event, Texas Mile, Maybe run the Silver State(im undecided), couple Autorama's...ect. Should be pretty fun.

here's a short video of the dyno......

http://www.youtube.com/watch?v=P4Dp7Dtmjnc

[GregWeld]

Josh --

Ran into a friend of yours today -- maybe -- Brian Wyland??

[Flash68]

Wow sweet numbers. What a machine.

I like the IC as is also. :)

[phillym5]

Josh --

Ran into a friend of yours today -- maybe -- Brian Wyland??

Greg...
The name is not ringing a bell.... however... im real good at forgetting names... and if i could place him in a certain situation... i probably would remember. Or if i put a face to the name.

[awr68]

Nice numbers Josh! What subframe are you going with?

[GregWeld]

Greg...
The name is not ringing a bell.... however... im real good at forgetting names... and if i could place him in a certain situation... i probably would remember. Or if i put a face to the name.

He was (maybe still is) a skater for Billabong... Parents own the Wyland art galleries in Hawaii... I'm over here now... taking in the Eddie Aikau (ran today) - and the Billabong Pipeline (Thursday)... bought a piece of art from him the other night. We didn't talk skating - he was too busy selling :lol: ... but later I found out he was/is a pretty serious skater. Just figured maybe you might have run across him sometime.



http://i919.photobucket.com/albums/ad33/gregweld/Eddie%20Aikau/DSC_7520.jpg

[phillym5]

See J, I knew all that talk about the "GBR" yesterday sparked a little interest in the Silver State...
A little bit.... but i am definitely proud to be a "Gumballer"!!

Wow sweet numbers. What a machine.

I like the IC as is also. :)

Thanks Flash....

Nice numbers Josh! What subframe are you going with?

I really like the Speed Tech frame.

Greg....
Thats a serious wave right there!!:omg:

[awr68]

I really like the Speed Tech frame.


It's a really nice piece....and great company to deal with too!! :thumbsup:

[Rybar]

Sick numbers. We really need some brighter pics posted of this car :thumbsup:

[GregWeld]

You need to paint that intercooler black, it's distracting.

Tyler


Coming from a guy that dyes his hair blue -- and you think this is "distracting"... :wow: :willy: :woot:

[phillym5]

Sick numbers. We really need some brighter pics posted of this car :thumbsup:

There are a bunch of shots with some super tech camera's. We shot the interior... the exterior.. sick driving shots.... HD video.... drive bye's...ect.
The crew at DC shoes has them. I have crappy satellite internet... so i can't download such big files... nor post them. Once DC puts them up on there new "oil leak" web site... they will all be there for your viewing pleasure...lol.

[phillym5]

Soooo......

Speed Tech has jumped on board and is going to make my Camaro that much better by providing a Subframe with all the bells and whistles!!

Im so stoked about this!!

Once the subframe arrives... we are going to do a full documentary on the "switch out" from my stock frame... to the new Speed Tech frame. Everything from the tear down... the swap.... to the reassemble.
Im thinking it would be cool to have here somewhere on the site so someone can see exactly what it entails to make the swap. (at least for a LS and T56)

The subframe should be to me 3-4 weeks... then a couple few days for the swap...

Big thanks to Roger over at Speed Tech!!

[Mr.VENGEANCE]

Thats the ticket, Josh.. now you can really maneuver that bad boy...

[awr68]

That's awesome!! :thumbsup:

[phillym5]

Thats the ticket, Josh.. now you can really maneuver that bad boy...

Vengeance....

I really need at least one of those canvases in my house.... pm me a price on what you might sell them for. Everything on your site is real nice. One of my favorites is the "Usual Suspects" piece. (i know its on a wall... but so sick).
My chick really like the "devil chick". And my daughter loves the flower pieces.

[GregWeld]

Josh --

Bout time you stepped up for some real handling! I knew you could do it!
:rofl: :rofl:

That will be a real nice addition to your Camaro!

[Vegas69]

Nice upgrade Josh. I was thinking you already had the ATS spindles but remember messing around with you cotter pins. It's going to look so much better than that fugly stock frame you have in there.

[tones2SS]

Very cool Josh!! That will make a world of difference.
Keep us posted please!:cheers:

Oh! My current desktop pic as well!!:thumbsup:

[monza]

Soooo......

Speed Tech has jumped on board and is going to make my Camaro that much better by providing a Subframe with all the bells and whistles!!

Im so stoked about this!!

Once the subframe arrives... we are going to do a full documentary on the "switch out" from my stock frame... to the new Speed Tech frame. Everything from the tear down... the swap.... to the reassemble.
Im thinking it would be cool to have here somewhere on the site so someone can see exactly what it entails to make the swap. (at least for a LS and T56)

The subframe should be to me 3-4 weeks... then a couple few days for the swap...

Big thanks to Roger over at Speed Tech!!

That's totally banging for sure!!! Sweet hook up nice looking frame. Couple days for the swap... lets time that ok?

[phillym5]

That's totally banging for sure!!! Sweet hook up nice looking frame. Couple days for the swap... lets time that ok?

We planned on doing it in 3 days....:unibrow:

But now.... since we are going to do such a thorough documentary... it will probably take longer. Im pretty excited though.

[dlouie87]

looks amazing. I saw this car on the iforged site. :thumbsup:

[monza]

We planned on doing it in 3 days....:unibrow:

But now.... since we are going to do such a thorough documentary... it will probably take longer. Im pretty excited though.


ya but.... you'll need what? New brakes, new wheels (wider!), brake lines re done, every thing else that attaches to the front frame re done or modified... How about shocks? Need some new double adjustable ones for that new frame and then you have to match the back ones. I think your list will grow, from more then just swapping front frames.

[phillym5]

ya but.... you'll need what? New brakes, new wheels (wider!), brake lines re done, every thing else that attaches to the front frame re done or modified... How about shocks? Need some new double adjustable ones for that new frame and then you have to match the back ones. I think your list will grow, from more then just swapping front frames.

Nope.... the wheels and brakes will just mount right up. Only a small portion of the brake line will need to be changed... Shocks are coming on the subframe.... thats the beauty of this Speed Tech frame.

Plan is... drop the current frame from the body with engine and all that still on it. Then just lift the motor and put it on the new frame... swap whatever needs to be swapped... then drop the body down on the newly assembled Speed Tech frame. It will be a lot of work.... but this is the fun stuff. Maybe.. just maybe i'll need to change a section of the exhaust...

We'll see... i guess... lol.

[monza]

But ... now you 'can' get wider wheels! So you kind of have too! Yep three days we'll see.

[phillym5]

But ... now you 'can' get wider wheels! So you kind of have too! Yep three days we'll see.

lol...... I probably should... damnit!! lol....:lateral:

[Vegas69]

I take it your not swapping spindles if your keeping the same brakes?

[phillym5]

I take it your not swapping spindles if your keeping the same brakes?

I assumed i was using the same ones.... you see an issue with that??
By the way... the rear axle stopped leaking on its own............

[skatinjay27]

I assumed i was using the same ones.... you see an issue with that??
By the way... the rear axle stopped leaking on its own............no issue just the AFX spindles are leaps and bound ahead of using stock ones with the G-mod

[Vegas69]

I assumed i was using the same ones.... you see an issue with that??
By the way... the rear axle stopped leaking on its own............

No problem except you're basically making a aesthetic change. Did you already have the Gulstrand mod on your stock sub?

[monza]

No problem except you're basically making a aesthetic change. Did you already have the Gulstrand mod on your stock sub?

I guess that also answers how I could not figure how the brakes would work?

[skatinjay27]

if speedtech is sending you a fully done frame then Im assuming you'll be getting the AFX spindles too and those need vette based brake setups. i would think some of your brake parts would interchange though.

on a off topic note: i watched the "text yo self" with you like a month ago...damn that was funny CIRCLE JERK hahaha...

[phillym5]

No problem except you're basically making a aesthetic change. Did you already have the Gulstrand mod on your stock sub?

No... i did not do the mod.

[phillym5]

if speedtech is sending you a fully done frame then Im assuming you'll be getting the AFX spindles too and those need vette based brake setups. i would think some of your brake parts would interchange though.

on a off topic note: i watched the "text yo self" with you like a month ago...damn that was funny CIRCLE JERK hahaha...


I am receiving the complete frame. If it does need Z06 brakes... i have access to a few sets.... so thats a good thing. For some reason i assumed the current Willwoods i have would have just swapped over.

[skatinjay27]

I am receiving the complete frame. If it does need Z06 brakes... i have access to a few sets.... so thats a good thing. For some reason i assumed the current Willwoods i have would have just swapped over.
keep in mind you dont have to run z06 brakes if you dont want to, you just need the brackets and rotor hats that were designed for c5 or c6 uprights and you should be able to keep you willwoods.

[phillym5]

if speedtech is sending you a fully done frame then Im assuming you'll be getting the AFX spindles too and those need vette based brake setups. i would think some of your brake parts would interchange though.

on a off topic note: i watched the "text yo self" with you like a month ago...damn that was funny CIRCLE JERK hahaha...

I just remembered... i have the Fatman 2inch drop spindles.

[phillym5]

I installed the Speedtech subframe..
What a HUGE improvement over stock. There is no rubbing issues at all. Here are a couple pics of the install. It took about 3 days to do. My car has a twin turbo set up... and the only 2 things that had to change was the exhaust downpipe on the drivers side... and i had to notch a section for an intercooler pipe. Other than that.. it was extremely painless.

[98ssnova]

Car looks good I have been thinking about getting this sub myself but dont know if it in the cards.

[GregWeld]

Glad to hear of the improvement Josh!

Now you better take the car out to Todds and leave it for awhile til the ground thaws out for you.. :rofl:

[tones2SS]

AWESOME!!!!:thumbsup:

[Flash68]

Josh, what's up with this car? Haven't seen anything on it lately out kickin ass and burnin streets or tracks... :_paranoid

[phillym5]

Josh, what's up with this car? Haven't seen anything on it lately out kickin ass and burnin streets or tracks... :_paranoid

Flash.... thanks for asking..
I was ripping it for a while in MI. Not sure if you heard the 180mph viper race story... that was pretty fun. (50-180+ vs. a 850 hp viper that runs low 10's @138... took him by 1.5 car lengths twice)
Then took her down to a photo shoot where i was playing around drifting the gal.. did a few burnouts.... then the tires started hooking and i blew apart the spider gears..lol. We threw it back together... i moved to Carlsbad... the rear end wasn't acting right.. so i had Jerry at Oceanside driveline throw in a Detroit Tru trac. I also had Best of Show guys clean up some of that left over "Sema rush" paint...haha. Those guys are great.:thumbsup:
Took her over to Turn Key and got a real nice cold start tune on her... now.. She is off to my buddy Shadowman just north of Sacramento.. where she will be getting her insides dissected.
We are going to completely update the wiring. Shadowman uses all the top of the line wire connectors and "fine tunes" the entire wiring. So when you look under the dash.. she will look "brand new BMW style".
He works on some pretty serious stuff. Check out his web site.
discovery-automotive.com/portal
Once i get it back from there.. i will join some of these local so-cal guys and start trying to learn "cone driving". :lol:

[awr68]

Flash.... thanks for asking..
I was ripping it for a while in MI. Not sure if you heard the 180mph viper race story... that was pretty fun. (50-180+ vs. a 850 hp viper that runs low 10's @138... took him by 1.5 car lengths twice)
Then took her down to a photo shoot where i was playing around drifting the gal.. did a few burnouts.... then the tires started hooking and i blew apart the spider gears..lol. We threw it back together... i moved to Carlsbad... the rear end wasn't acting right.. so i had Jerry at Oceanside driveline throw in a Detroit Tru trac. I also had Best of Show guys clean up some of that left over "Sema rush" paint...haha. Those guys are great.:thumbsup:
Took her over to Turn Key and got a real nice cold start tune on her... now.. She is off to my buddy Shadowman just north of Sacramento.. where she will be getting her insides dissected.
We are going to completely update the wiring. Shadowman uses all the top of the line wire connectors and "fine tunes" the entire wiring. So when you look under the dash.. she will look "brand new BMW style".
He works on some pretty serious stuff. Check out his web site.
discovery-automotive.com/portal
Once i get it back from there.. i will join some of these local so-cal guys and start trying to learn "cone driving". :lol:

So basically nothing! :lol:

Nice to see a bad ass car always evolving! :thumbsup:

Oh yeah....Kid Chris says Hi!

[phillym5]

So basically nothing! :lol:

Nice to see a bad ass car always evolving! :thumbsup:

Oh yeah....Kid Chris says Hi!

haha... well... i wouldn't go that far.
Some cool stuff happened... but i can't let the cat out of the bag.:unibrow:

[awr68]

haha... well... i wouldn't go that far.
Some cool stuff happened... but i can't let the cat out of the bag.:unibrow:

come on mister....you have to share! :yes:

[GregWeld]

Josh is going to have to dye his hair (not blue!) blonde --- and get a surfboard now! :D

[Flash68]

Flash.... thanks for asking..
I was ripping it for a while in MI. Not sure if you heard the 180mph viper race story... that was pretty fun. (50-180+ vs. a 850 hp viper that runs low 10's @138... took him by 1.5 car lengths twice)
Then took her down to a photo shoot where i was playing around drifting the gal.. did a few burnouts.... then the tires started hooking and i blew apart the spider gears..lol. We threw it back together... i moved to Carlsbad... the rear end wasn't acting right.. so i had Jerry at Oceanside driveline throw in a Detroit Tru trac. I also had Best of Show guys clean up some of that left over "Sema rush" paint...haha. Those guys are great.:thumbsup:
Took her over to Turn Key and got a real nice cold start tune on her... now.. She is off to my buddy Shadowman just north of Sacramento.. where she will be getting her insides dissected.
We are going to completely update the wiring. Shadowman uses all the top of the line wire connectors and "fine tunes" the entire wiring. So when you look under the dash.. she will look "brand new BMW style".
He works on some pretty serious stuff. Check out his web site.
discovery-automotive.com/portal
Once i get it back from there.. i will join some of these local so-cal guys and start trying to learn "cone driving". :lol:

Wow dude. That is some high speed shiat in an old bucket of bolts. :D I missed that story...

Some nice continuous updates you're working on I see.... let's see some more vids of some action soon. :unibrow:

[XcYZ]

Some nice continuous updates you're working on I see.... let's see some more vids of some action soon. :unibrow:

x2. :D

[tones2SS]

Man, your car is FAST!!! I just read the part where you took that Viper that run's 10's out, not once, but TWICE?!?!:_paranoid :willy:
VERY NICE!:thumbsup: :cheers:

[fleet]

Wow dude. That is some high speed shiat in an old bucket of bolts. :D

It's not a '68.


lol

[Rybar]

Steve Rupp and Nick Licata, please do a spread on this car if you are listening :D

Josh we need vids of that Viper race :unibrow:

[phillym5]

Steve Rupp and Nick Licata, please do a spread on this car if you are listening :D

Josh we need vids of that Viper race :unibrow:

I usually film ALL the races I've been in.. unfortunately this one was not filmed. But here is the Viper i raced.. he is a good friend of mine.. and i have been chasing him down for quit some time now. He's the West Michigan "benchmark"... :lol:
http://www.youtube.com/watch?v=rbP08-wF8zo 650rwhp 650rwtq

Here he is draggin a Procharged 69 camaro that went 8.99@149.
Don't mind the funny ass hick in the beginning!! lol.
http://www.youtube.com/watch?v=y3CKiAb-NqI&feature=player_embedded
The camaro couldn't get out of the hole good on the street.. but the vipers top end is craaazy.

[Flash68]

I usually film ALL the races I've been in.. unfortunately this one was not filmed. But here is the Viper i raced.. he is a good friend of mine.. and i have been chasing him down for quit some time now. He's the West Michigan "benchmark"... :lol:
http://www.youtube.com/watch?v=rbP08-wF8zo 650rwhp 650rwtq

Here he is draggin a Procharged 69 camaro that went 8.99@149.
Don't mind the funny ass hick in the beginning!! lol.
http://www.youtube.com/watch?v=y3CKiAb-NqI&feature=player_embedded
The camaro couldn't get out of the hole good on the street.. but the vipers top end is craaazy.

Ha, I remember seeing that street race vid before. I've always wanted a Viper to play with! Don't take much to get big power out of them, esp if you have the forged internal motor of the late 90s from the factory.

[speedshftr]

ive had 5 vipers over the years and its the only car i ever had that i beat some motor cycles on.the down low gut busting tourqe is where its at.

[awr68]

It's not a '68.


lol

Ouch! That one hurts!! :lol:

[phillym5]

Well.. she has been delivered to the one and only "Shadowman". Shadowman nick names every car that enters his facility based on the character and purpose. So... he nicked named the Camaro.. "Road Kill"..lol. based on it kills anything that steps to it on the road. lol. (yeah, he knows of all the highway races).
So now he is going to put all updated wiring with the bad ass "BMW" style connectors.. and take away all wires from the harness that aren't being used. It should really "complete" the car. Im also having him re due the stereo system and get rid of the "volcano" style speakers in the rear shelf amongst other things.
I believe once she leaves Discovery.... she will then be "complete". :thumbsup:
Here is the link that will show all the updates. Shadowman facility is beyond cool.. and the cars that come through there are top notch. Im pretty stoked to have him tighten up the camaro.
http://www.discovery-automotive.com/portal/module.php?id=projects_roadkill1

[tones2SS]

That car is awesome!:thumbsup:
Some nice builds coming out of that ASP shop.:yes:

[awr68]

Very cool!! Can't wait to see the pics as he works on it!!

[Flash68]

Very cool.. I'd like to see some BMW wiring pics once that gets moving...

[Blake Foster]

Steve Rupp and Nick Licata, please do a spread on this car if you are listening :D

Josh we need vids of that Viper race :unibrow:

already done from what i hear.

[fleet]

I'd go with the Mini Cooper wiring option instead, based on the fact your driving style matches up to that in 'The Italian Job'.

:D

[tcronkright]

Awesome improvement. I can't wait to burn up the '5' in a couple months! We'll see how the chevy and pontiac stack up.

[cmraman]

Steve Rupp and Nick Licata, please do a spread on this car if you are listening :D

Josh we need vids of that Viper race :unibrow:

That's been handled. I shot it earlier this summer. Josh an Brian were awesome to work with. The car is killer.

[Gandalf]

Can't wait to see her back on the road Josh!

[phillym5]

and on that note
has he gotten to start any work or your car yet?:unibrow:

Why yes he has...... he re did the wiring on the gauge cluster ... and wow. it looks amazing.
The trunk is all being dry fit this saturday. As soon as his web site is done with the update.. the photo's will be live in the next couple days.:thumbsup:

[lhkustoms]

Why yes he has...... he re did the wiring on the gauge cluster ... and wow. it looks amazing.
The trunk is all being dry fit this saturday. As soon as his web site is done with the update.. the photo's will be live in the next couple days.:thumbsup:

Cool anxious to see some pictures :thumbsup:

[tones2SS]

Cool anxious to see some pictures :thumbsup:

Same here!:thumbsup:

[69pro-touring]

Thinking about doing a carbon rear diffuser on my 69, what did you do about your license plate, looks a lot better without it but don't know how i could get around not having one

[phillym5]

Thinking about doing a carbon rear diffuser on my 69, what did you do about your license plate, looks a lot better without it but don't know how i could get around not having one

I usually just stick in in the rear window... i haven't had a problem yet.:thumbsup:

[awr68]

All cleaned up! Let me know if I missed anything! :thumbsup:

[fleet]

All cleaned up! Let me know if I missed anything! :thumbsup:

qRTBVPgHM3Y

[awr68]

Now that's funny! :lol:

[skatinjay27]

All cleaned up! Let me know if I missed anything! :thumbsup:hey! put my post back, Im trying to get my post count near yours!:lol:

[Flash68]

qRTBVPgHM3Y

:rofl: I just saw that rerun the other day too.

[fleet]

Now that's funny! :lol:

You're quite the cleaner 'Antny. :D

If only Newman had drifted in a '68... it would have been perfect...:lol:

:rofl: I just saw that rerun the other day too.

Same here. But I've never seen the part with Newman in the car in the syndicated version re-runs.

[awr68]

hey! put my post back
Sorry it's long gone!

Im trying to get my post count near yours!:lol:

Yeah....good luck with that! :lol:

[skatinjay27]

thats Ok its still there in a qoute:P

[awr68]

thats Ok its still there in a qoute:P

Ah, missed that one! You can have it! See ya in a few days!! :D

[phillym5]

Ah, missed that one! You can have it! See ya in a few days!! :D

Thanks for the clean up!! :captain:

[awr68]

Thanks for the clean up!! :captain:

any time! :thumbsup:

[phillym5]

I have an update on the re-wire on my car.
Even though its a bit embarrassing.. understand that the car was wired in a matter of time to serve the only purpose of working and getting from Vegas to San Diego... realizing that it would have to be broke back apart for a "proper" wiring. Its not all completed yet... but the difference is phenomenal.

Shadowman has outdone himself. This was no job for the shy... and i am ecstatic with the outcome.

Now after the holidays... i am stopping by his shop to take the front end of the car apart and pin the crank... THEN im back in business!!:unibrow:

Click on the red "HERE" tabs and you can see the process step by step.
http://www.discovery-automotive.com/portal/module.php?id=projects_roadkill

[GregWeld]

:faint: :faint: :faint: :faint: :willy: :willy: :willy: :willy: :willy:


MO BETTA!


WOW is all I can say......

[Vegas69]

Holy shiat... Looks like she went on weight watchers.:unibrow:

[Jr]

Why are you pinning the crank? I have never heard of a turbo car having the crank pinned?

Your updates look great.:thumbsup:

[Steve1968LS2]

Just saw the layout of this car for the April issue of Camaro Performers.. the story and images are KILLER.

Going to be worth the wait :)

[GregWeld]

Why are you pinning the crank? I have never heard of a turbo car having the crank pinned?

Your updates look great.:thumbsup:


Maybe it means he's going to have his crank pinned? :wow: :wow: :willy: :rofl:

[Matt@BOS]

Why are you pinning the crank? I have never heard of a turbo car having the crank pinned?

Your updates look great.:thumbsup:

I think the balancer bolt has backed out a couple times on his car. It happened to me once and it was more than a little disconcerting...

Anyway, good to see all the wiring cleaned up Josh. I bet you can't wait to get the car back on the road.

Matt

[Jr]

Maybe it means he's going to have his crank pinned? :wow: :wow: :willy: :rofl:

Listen to the :theresa:

[Jr]

I think the balancer bolt has backed out a couple times on his car. It happened to me once and it was more than a little disconcerting...

Anyway, good to see all the wiring cleaned up Josh. I bet you can't wait to get the car back on the road.

Matt

Matt,

Good call on the balancer bolt. I have not heard of Josh saying that he had a problem with the balancer bolt.

[Flash68]

Nice to see some updates! Looking forward to that Camaro Performers feature.

[GregWeld]

I just couldn't help myself.... :D

[cmraman]

Just saw the layout of this car for the April issue of Camaro Performers.. the story and images are KILLER.

Going to be worth the wait :)

Thanks Steve!!

[awr68]

WAY better! I just skimmed the pics and need to study them better when I get a spare moment! :thumbsup:

[phillym5]

Finally got the car completed. I flew into Shadowman's shop for a few days to spend some time learning about the wiring.. and to assist in tearing down the front of the camaro and drill the crank to "pin it".

All i can say is WOW!! The wiring is unbelievable. Here is just a quick photo of the plate under the dash holding the computers. The photo's really don't do it justice... but it is very nice. Even the speakers wire's have doitch connectors from BMW's. Everything now is extremely serviceable..and easy to find. Here is the link to the latest stage of photo's. I receive delivery of the car next week.:thumbsup:

Back in action.:captain:

http://www.discovery-automotive.com/portal/module.php?id=projects_roadkill5

[Flash68]

Josh, that's sweet bro. Looking clean as all hell now. Git out and beat on it some more now. :D

[GregWeld]

Sweet Josh!

You bringing it to RTTC II??

[tones2SS]

Very nice Josh. Looks nice and neat.:thumbsup:

[phillym5]

I took the camaro up to the Cars and Coffe (Supercar Saturday) last weekend with Chris and his Chevelle from Best of Show. Also met Matt with his Best of Show Camaro.
Man.. we had to hit the road at 5:30 am to get there by 6am to get a half way decent spot. It was craaaazy. Never have i seen so many ridiculous cars in one spot.

Anyway... me and the fellas were parked near the back of the lot... and boy did the camaro's drawl the attention. Even to the point to where the guys who started the whole Cars and Coffee invited the Camaro's to park "up front" next time we show up. I thought that was pretty cool.

Anyway.. the drive was awesome. Me and the Chevelle ran into a Porsche Turbo on the way there while we were cruising at 90. The Porsche guy parked near us and immediately sparked a conversation about our cars cruising so well at those speeds. :rolleyes:

On my way home... i must have got snipered because a buddy sent me this photo with the words Paparazzi on the title. lol. His friends must have shot the photo and sent it to him..... who then sent it to me. Funny.

[tcronkright]

I heard the car was a magnet! No surprise, it is looking better than ever.

[fleet]

Yeah, not bad...

http://i87.photobucket.com/albums/k156/wnyjazz/1186579991_aNN2n-XL.jpg

:P

[fleet]

Here's the link. http://www.cncpics.com/2011/February-2011/February-12th-2011-1/15807174_7o5G4#1185358165_67Dot

Looked like quite a show.

http://i87.photobucket.com/albums/k156/wnyjazz/1186599320_hxZd5-XL.jpg

[tones2SS]

Anyway.. the drive was awesome. Me and the Chevelle ran into a Porsche Turbo on the way there while we were cruising at 90. The Porsche guy parked near us and immediately sparked a conversation about our cars cruising so well at those speeds. :rolleyes:
That was awesome! lol
Car looks great.:cheers:

[frankv11]

nice build, who makes those seats?

[killer67]

Looks sweet!

[Matt@BOS]

Josh, I still need a ride :unibrow:

Congrats on the ink in Camaro Performers too. I know you've been waiting patiently for what seems like forever since the car was shot.

Matt

[phillym5]

Josh, I still need a ride :unibrow:

Congrats on the ink in Camaro Performers too. I know you've been waiting patiently for what seems like forever since the car was shot.

Matt

You can get a ride anytime!!

As far as the wait went... its all good... the longer the wait.. the more the anticipation! :lateral:

[Jr]

I was fortunate enough to see this car in person last weekend. Damn, the paint on this car is GREAT! Pics just don't to it justice. Maybe the car will be raced at the next event...? Again, fantastic car!

[Flash68]

Josh - Nice meetin ya man. I was pissed I didn't get a chance to look over your car more closely. I was right there but had to keep moving. Hopefully next time. I'm guessing you'll bring it to the August event that sounds like might happen? :unibrow: