2006 Cts Seats In 68 Camaro

[68KMARO]

Hi to all. This is my 1st post on an amazing site. Wanted to know if the cts cadillac seats would be a good fit in my 68 camaro conv. ? I like the idea of the seat belts being intergrated in the seats. Any thoughts?

68kmaro
Rich
junior member

1968 CAMARO CONVERTIBLE
work in progress
los angeles

[XcYZ]

Welcome, Rich. I don't know if they would fit, I guess I'd be concerned about the width of the base and the height of the bottom seat cushion. Do you know those measurements?

[98ssnova]

i would think that you could make a new base or adapt an old one the width of the seat pan should be fine

[reckn8]

To be honest I drive a '05 CTSV and the seats are going to be too tall in the seat area. The roof line on a CTS is very high unlike the early Camaro. Your head will be in the headliner.

[TreySmith]

They will fit, you will just have to cut the brackets to make them sit lower..

[kaptainkw]

I may have another option. I have a '68 Camaro Convertible, C4 IRS, Art Morrison C5 sub-frame and C6 LS2/T56. Primarily for saftey reasons I wanted the shoulder haraness. My daily driver is an '04 CTS :D

I bought some Sebring Convertible seats that have the integral seat belt but also articulate and slide forward to allow easy access to the rear.

The car's at a shop so I don't have pictures but here's a link to a guy that put them into a Corvair and how to do it (http://www.corvairkid.com/sebring.htm). I have an extra wiring harness if you're intersted in this path.

Good Luck!