PDA

View Full Version : Ring Brothers CNC'd clutch master reservoir

XcYZ
11-09-2008, 11:49 AM
Here are some pics of the new CNC'd clutch master reservoir from Ring Brothers. It's made to be a direct replacement to the standard GM plastic unit. It's a two piece design, the reservoir can be slid up and down inside the mounting bracket. It uses the GM lid seal/diaphragm, so the fitment and function is same as stock. It will come with a barb fitting for use with the stock rubber line, but the bottom of the reservoir is tapped 1/8NPT so AN adapter and line can be used instead if you wanted to go that route. The finish is annodized titanium and looks trick.


http://www.lateral-g.net/temp/RB_clres_01.jpg

http://www.lateral-g.net/temp/RB_clres_02.jpg

http://www.lateral-g.net/temp/RB_clres_03.jpg
ProdigyCustoms
11-09-2008, 11:53 AM
Too fricken cool
Steve1968LS2
11-09-2008, 11:54 AM
Mike was going to give me one at SEMA but he couldn't find it in the trunk of RAZOR.. I guess I know what Jim did with it! :lol:

Killer part that I'm dying to try... all of their stuff is done so well.
camcojb
11-09-2008, 12:02 PM
Mike was going to give me one at SEMA but he couldn't find it in the trunk of RAZOR.. I guess I know what Jim did with it! :lol:

Killer part that I'm dying to try... all of their stuff is done so well.

yep, Jim snagged it for Scott to get some pics up on the site.............:D It is a very cool unit, like all the Ring Bros items are.

Jody
XcYZ
11-09-2008, 12:06 PM
They have 100 in stock right now, they're just waiting on the 1/8NPT barb fitting and the diaphragm.

I have an idea on what the price might be, but I don't want to post it in case I'm wrong. I also talked to Jim and Mike about doing a group purchase on the site and they were interested. I'll get the official pricing tomorrow as well as any info on a possible group pricing.


Mike was going to give me one at SEMA but he couldn't find it in the trunk of RAZOR.. I guess I know what Jim did with it! :lol:

Killer part that I'm dying to try... all of their stuff is done so well.


This has been a project that Jim, Mike and I have been working on for a few months. I leaned on them for this product this past summer as well as supplying them with a stock plastic unit for basic form factor measurements and did the trial fitting of the unfinished prototype last month.

:cheers:
awr68
11-09-2008, 05:13 PM
Very nice piece!! :thumbsup:
lil427z
11-09-2008, 06:43 PM
:cheering: first class.
rick k:cheers:
badmatt
11-09-2008, 08:00 PM
Ill buy one!!!!!! like tomorow
mazspeed
11-09-2008, 09:15 PM
That looks beautiful. They make the best stuff.
takid455
11-10-2008, 09:44 AM
me wants!!!
DOOM
11-10-2008, 05:16 PM
Man, Scott you get all the cool toys :willy:
Mario
novanutcase
11-10-2008, 05:25 PM
That's sexy!:unibrow:

How does it keep from slipping out? In the picture I don't see a ledge where it sits ontop of the mount. Is there a way to tighten it down like a clamp?

John
rjardy
11-10-2008, 08:16 PM
That's sexy!:unibrow:

How does it keep from slipping out? In the picture I don't see a ledge where it sits ontop of the mount. Is there a way to tighten it down like a clamp?

John


I'm thinking set screw from the back of the bracket...
XcYZ
11-10-2008, 08:19 PM
I'm thinking set screw from the back of the bracket...


Exactly. :thumbsup:
mazspeed
11-10-2008, 09:31 PM
No price yet?
lil427z
11-11-2008, 05:19 PM
I have 2 on the way.:D
RICK K
Tom.A
11-12-2008, 05:30 PM
I'll get the official pricing tomorrow as well as any info on a possible group pricing.

Scott, Any news on this yet. I want to change mine. I was thinking mine looks like a bottle of headache pills. Maybe I should put an Advil sticker on it:D
http://i186.photobucket.com/albums/x82/passperf/1HYD4.jpg
XcYZ
11-12-2008, 06:24 PM
Looking like they will be available next week. :thumbsup:
slownova
11-12-2008, 07:08 PM
cost and any other finishes?
Stuart Adams
11-12-2008, 08:08 PM
Cool piece. Very nice.
Ringbrothers
11-13-2008, 12:15 PM
They have 100 in stock right now, they're just waiting on the 1/8NPT barb fitting and the diaphragm.


As soon as we are ready to ship I will let you know!
68protouring454
11-13-2008, 12:20 PM
how much?
mazspeed
11-13-2008, 06:52 PM
Is curious how soon someone is going to copy this and put it for sale $10 cheaper right on this site.
slck6t9
11-13-2008, 08:24 PM
Why!!???
The WidowMaker
11-14-2008, 02:37 PM
how many of these > $$$$$$$? too friggin bitchin.

also, when are the A body hinges going to be done?

Tim
tjbruning
11-15-2008, 11:57 PM
Looks trick :thumbsup: :cool:
Ringbrothers
12-11-2008, 10:07 AM
We are now shipping the reservoirs - check out the website to order
www.ringbrothers.com (http://www.ringbrothers.com)
Let me know if anyone has any questions.
Thanks,
Staci
JamesJ
12-11-2008, 12:38 PM
Any reason why I can not anodize it if I get one?