ProdigyCustoms
10-30-2008, 07:23 PM
As seen on Larrys MotiV8tr!
Prodigy Customs 2 ½ stainless pre bent tailpipes for G Bar, Air Bar and Prodigy Bar are here and in stock. These Mandrel bent tail pipes solve the fabricated tailpipe issue associated with these popular suspension systems. The tailpipes will fit any exhaust system with 2 ½ outlets (2 ½ pipes for 3 muffler oulet are also available) as long as the system has 12 to 14 center to center muffler outlets in the common dual muffler location. Most offset in / center out mufflers fall in this 12 to 14 center to center range.
These tailpipes are designed to work with notched tanks like Ricks or a notched factory tank. Basically any dog eared tank will work. And clear with plenty of room coil over and Shockwave applications.
Tailpipes are $450 a pair, and available now. Yeah, that is pricey, but all the cost is in the multiple bends and stainless material. Still much cheaper then fabricated tailpipes and a very quick install, and they fit perfect.
We also can combine these tailpipes with a Magnaflow 2 ½ or 3 exhaust systems we have in stock. 2 ½ system are only $500, 3 systems are only $650, Add tailpipes for $450 and your set.
The big myth:
Lots of people think you need 3 exhaust systems for 500HP or more. Experts will tell you that over 500HP you should run 3 to the mufflers. After the muffler the exhaust is pretty much done and 2 ½ is just fine. 2 1/2 tailpipes are good for horsepower up to 700HP with 3 Primaries and 2 ½ tailpipes. Full 2 ½ systems are good up to 500HP.
To order, call four zero seven 832 1824 or email [email protected]
http://i169.photobucket.com/albums/u212/ProdigyCustoms/DSC_0365-1.jpg
http://i169.photobucket.com/albums/u212/ProdigyCustoms/DSC_0368-1.jpg
http://i169.photobucket.com/albums/u212/ProdigyCustoms/DSC_0376.jpg
Prodigy Customs 2 ½ stainless pre bent tailpipes for G Bar, Air Bar and Prodigy Bar are here and in stock. These Mandrel bent tail pipes solve the fabricated tailpipe issue associated with these popular suspension systems. The tailpipes will fit any exhaust system with 2 ½ outlets (2 ½ pipes for 3 muffler oulet are also available) as long as the system has 12 to 14 center to center muffler outlets in the common dual muffler location. Most offset in / center out mufflers fall in this 12 to 14 center to center range.
These tailpipes are designed to work with notched tanks like Ricks or a notched factory tank. Basically any dog eared tank will work. And clear with plenty of room coil over and Shockwave applications.
Tailpipes are $450 a pair, and available now. Yeah, that is pricey, but all the cost is in the multiple bends and stainless material. Still much cheaper then fabricated tailpipes and a very quick install, and they fit perfect.
We also can combine these tailpipes with a Magnaflow 2 ½ or 3 exhaust systems we have in stock. 2 ½ system are only $500, 3 systems are only $650, Add tailpipes for $450 and your set.
The big myth:
Lots of people think you need 3 exhaust systems for 500HP or more. Experts will tell you that over 500HP you should run 3 to the mufflers. After the muffler the exhaust is pretty much done and 2 ½ is just fine. 2 1/2 tailpipes are good for horsepower up to 700HP with 3 Primaries and 2 ½ tailpipes. Full 2 ½ systems are good up to 500HP.
To order, call four zero seven 832 1824 or email [email protected]
http://i169.photobucket.com/albums/u212/ProdigyCustoms/DSC_0365-1.jpg
http://i169.photobucket.com/albums/u212/ProdigyCustoms/DSC_0368-1.jpg
http://i169.photobucket.com/albums/u212/ProdigyCustoms/DSC_0376.jpg