84 Regal Gnxtreme Update!

[GNXTREME]

Here are a few new pictures. I finally made a pass down the 1320. I was hoping get a 13 second timeslip, and maybe break a
100MPH in the quarter. My worn out 20 year old L98 is warmed up with just a 95 LT1 roller cam and some 1.6 LT4 roller rockers.
The TPI unit and ECM are from a 87 305 trans am. I did pop in some 27lb Grand National injectors (stock 19lb prom!)
With 3.42 gears and a T5 trans I pulled a not so hot 2.07 60ft but still crossed the strip in 13.72 seconds at 104.7 MPH!!
I couldnt belive the MPH!!! Im very pleased with the car and I know it will go faster with some tuning and better driving.

[XcYZ]

Car looks good. :thumbsup:

[Tom.A]

Congrats on the time. Car looks and sits nice.

[Tim Baillie]

Here are a few new pictures. I finally made a pass down the 1320. I was hoping get a 13 second timeslip, and maybe break a
100MPH in the quarter. My worn out 20 year old L98 is warmed up with just a 95 LT1 roller cam and some 1.6 LT4 roller rockers.
The TPI unit and ECM are from a 87 305 trans am. I did pop in some 27lb Grand National injectors (stock 19lb prom!)
With 3.42 gears and a T5 trans I pulled a not so hot 2.07 60ft but still crossed the strip in 13.72 seconds at 104.7 MPH!!
I couldnt belive the MPH!!! Im very pleased with the car and I know it will go faster with some tuning and better driving.


Looks awesome..............doing a TPI in my Regal as well !

[skatinjay27]

man thats a great mph for a high 13 pass. congrats... car looks good too.

[deuce_454]

i really like the look... and nice timeslip, especially considdering your launch / roll start :P there are plenty og g bodys doing 1.5-1.6 second 60 foot times on stock suspension and dot tires so there is room for improvement!

and a little hijack.. what size spacers are you running to fit those rims.. and what size are they... stock corvette??

[soundqdoug]

Car looks good!
I'm doing an interior for one as we speak, I'll post up some pics soon..

[cocarter]

what size spacers did you use to mount the Vette wheels? Where did you get the spacers?
Conrad