Bowtiguy
05-26-2008, 09:44 AM
SOLD
The beautiful LS7 was removed from my 2008 JSB Z06 by LG motorsports after the car was delivered to them with just 6 miles on the clock! Exhaust ports and intake ports were taped off along with all oil outputs on the pan.
This LS7 Includes everything from the air filter and MAF to the oil pan. This is like buying a crate motor and getting the following items ( NOT included with crate motors from GM) for free!...
LS7 engine cover...12574619 $35.56
LS7 engine cover...12574620 $56.57
LS7 Oil tank ........12603281 $829.99
LS7 Oil line...........15210117 $95.76
LS7 Oil Line..........15210122 $101.14
LS7 air box assembly with Mass Air Flow sensor.....GM $$$??? I've seen well used at $100..this one has 6 miles!
The factory drysump system is complete and included with the motor.
Items this motor come with include...
complete intake
injectors
coil packs
plug wires/plugs
LS7 clutch and flywheel
crank/cam sensors
Items you will need to purchase and are NOT included ...
1) Throttle body ( included in the GM EFI package)
2) water pump ( $119 on E-bay ) or included in GM accessory package
3) stock manifolds ; most will install aftermarket headers anyhow, Tyler at ATS makes killer set for 1st gen F-bodies.
Just unbolt your stock accessories form your existing corvette LS2/3 motor and its ready to install in a C6 vette.... OR you can purchase an entire LS7 corvette accessory kit from GM (Part#19155067) for $944.72 for a non Y-body install.
Add one of GM's stand alone EFI systems or any aftermarket system and you are off and running.
Availble for local pick-up in Wylie, Tx. at LG or they have been nice enough to offer to package and ship them. Crate and ship will range $250-$600 depending on your location. I accept Pay-pal payments ( deposit only OR pay in full + 3%)
I have a ton of pics available too...
Was $12,500...Now $11,500!
The beautiful LS7 was removed from my 2008 JSB Z06 by LG motorsports after the car was delivered to them with just 6 miles on the clock! Exhaust ports and intake ports were taped off along with all oil outputs on the pan.
This LS7 Includes everything from the air filter and MAF to the oil pan. This is like buying a crate motor and getting the following items ( NOT included with crate motors from GM) for free!...
LS7 engine cover...12574619 $35.56
LS7 engine cover...12574620 $56.57
LS7 Oil tank ........12603281 $829.99
LS7 Oil line...........15210117 $95.76
LS7 Oil Line..........15210122 $101.14
LS7 air box assembly with Mass Air Flow sensor.....GM $$$??? I've seen well used at $100..this one has 6 miles!
The factory drysump system is complete and included with the motor.
Items this motor come with include...
complete intake
injectors
coil packs
plug wires/plugs
LS7 clutch and flywheel
crank/cam sensors
Items you will need to purchase and are NOT included ...
1) Throttle body ( included in the GM EFI package)
2) water pump ( $119 on E-bay ) or included in GM accessory package
3) stock manifolds ; most will install aftermarket headers anyhow, Tyler at ATS makes killer set for 1st gen F-bodies.
Just unbolt your stock accessories form your existing corvette LS2/3 motor and its ready to install in a C6 vette.... OR you can purchase an entire LS7 corvette accessory kit from GM (Part#19155067) for $944.72 for a non Y-body install.
Add one of GM's stand alone EFI systems or any aftermarket system and you are off and running.
Availble for local pick-up in Wylie, Tx. at LG or they have been nice enough to offer to package and ship them. Crate and ship will range $250-$600 depending on your location. I accept Pay-pal payments ( deposit only OR pay in full + 3%)
I have a ton of pics available too...
Was $12,500...Now $11,500!