KD HOTRODS Sema Camaro pics

[68protouring454]

figured i would post some pics up of there camaro build, really killer car,
http://img514.imageshack.us/img514/9625/camarofinal005dn8.jpg (http://imageshack.us)
http://img514.imageshack.us/img514/9625/camarofinal005dn8.28ecab5927.jpg (http://g.imageshack.us/g.php?h=514&i=camarofinal005dn8.jpg)

more pics here
http://picasaweb.google.com/JakeParrott/KennyDavisHotRodsSemaCamaro

[B Schein]

Iv never seen any one have the trunk open it to the back seat like that befor. Did they extend the rockers on that car.

[68protouring454]

yes ext rockers and no back seat, really killer looking, kenny or trav can tell you more

[Steve1968LS2]

I think it was one of the nicest Camaros at the show, very nice attention to detail.

[RedRyder]

The wheels are very unorthodox, but they work.

very cool

[novanutcase]

Great car Kenny and , NO, you can't have my shoes! LOL!:lol:

John

[Spiffav8]

Picture doesn't do this car justice! It's just awesome. Like Rupp said...it's one of my favorite Camaros at the show.

[notorious1970]

Loved this car...looked sinister. I really like those wheels as well.
-derek

[JayR]

The wheels are very unorthodox, but they work.

very cool

Since the car has a ZL1 crate motor, we were going for a moden COPO Camaro theme all around and the wheels were the icing on the cake. They definitely aren't everyone's cup of tea and non-Camaro people were scratching their heads but we like tio mix it up, right Kenny?

[RECOVERY ROOM]

The whole car was themed to be a modern,ZL1 styling look.some people didn't get it,some did.I thought the whole project turned out very good.:thumbsup:

[customcam]

i was looking forward on seeing this 69 and im very impressed
i love the whole look especially the interior and the wheels great job on all who worked on the car
any close ups of the wheels? :wow:

[awr68]

It is a nice car! and Travis it was great talking with ya!!

[TonyL]

My first camaro had the COPO type dog dish hubcaps and wheels, so I instantly got it. I think it looks awesome. :D

[TravisB]

Thanks for all the kind words everyone we thought overall the car did pretty good. Brought a lot of attention to Nitrous Express and there booth we couldnt have asked for a better spot or any better guys to deal with. Big thanks to the guys at NX.

Rockers were extended down to the pinch weld and fenders extended to match. there are lots of subtle mods to the car that are hard to catch. For intance the stock inner wheel wheels were all one peiced to the fender, spoiler three pieced, rear tail panel and firewall brushed and satin cleared.

**nice meeting everyone as well**

[Sales@Dutchboys]

Bad A$$ Travis and Kenny!

I love the final product, I know some people dont understand the wheels but without them the whole theme of the car wouldnt have gone, and those wheels just totally pulled everything together!:thumbsup:

Congrats.

Paul

[J2SpeedandCustom]

**nice meeting everyone as well**

I still didn't get a chance to meet you....damn Kenny is slackin. :rofl:

[TravisB]

I still didn't get a chance to meet you....damn Kenny is slackin. :rofl:


LOL


at least he meant well lol.

[TravisB]

close up of the wheels

[Lenie]

I really liked the car and wheels, different. Nice job.

[Bill Howell]

The fold down rear seat that opened up the interior and the billet dash were the coolest parts of the car to me. The dash was so understated but then when you really looked at it, it was off the hook. Emblems on the fenders were another nice touch also. No doubt, one of the nicest cars at the show. I made several trips by it to look at all the small details. Nice work guys.:thumbsup:

[Diognes56]

:drool: :thumbsup: .

David

[Bowtieracing]

Thanks for all the kind words everyone we thought overall the car did pretty good. Brought a lot of attention to Nitrous Express and there booth we couldnt have asked for a better spot or any better guys to deal with. Big thanks to the guys at NX.

Rockers were extended down to the pinch weld and fenders extended to match. there are lots of subtle mods to the car that are hard to catch. For intance the stock inner wheel wheels were all one peiced to the fender, spoiler three pieced, rear tail panel and firewall brushed and satin cleared.

**nice meeting everyone as well**


I love the front fenders!! Now i know what to do with mine. Can you tell us how did you crate the embels ? I love it!

[kennyd]

I love the front fenders!! Now i know what to do with mine. Can you tell us how did you crate the embels ? I love it!


the ZL1 emblems were made by motorhead jewlery . we sent them a factory Z28 emblem to copy .

the fenders are alot of metal work ,i bet they weigh atleast 100lbs each .

[kennyd]

I still didn't get a chance to meet you....damn Kenny is slackin. :rofl:

kiss my a$$

[Mean 69]

Holy crap guys!!!! I really dig it, I'd love to have seen it in person, maybe sometime in the future. Glad to hear you were able to show it off at the SEMA show, you guys clearly worked your butts off on it, and it is a really cool car in my opinion. I had known about the theme of the car for months, so knew what to expect "somewhat," but this really exceeded my vision of what it would be like. Very slick, a really nice modernized rendition of the ZL1. Outstanding, I love the interior!

Terrific work, congratulations to you guys and the owner!
Mark

[oneninesixseven]

Thanks for all the kind words everyone we thought overall the car did pretty good. Brought a lot of attention to Nitrous Express and there booth we couldnt have asked for a better spot or any better guys to deal with. Big thanks to the guys at NX.

**nice meeting everyone as well**

The car did awesome! It received a ton of attention and brought people to our booth. I just wanted to say thanks to Travis and Kenny for all of the hard work and effort. We couldn't have asked for a better show.

Brian

[Steve1968LS2]

the ZL1 emblems were made by motorhead jewlery . we sent them a factory Z28 emblem to copy .

the fenders are alot of metal work ,i bet they weigh atleast 100lbs each .

Car was great and it was good to talk with you in person. That 57 was sweet as well, any pics of it to share?

[Musclerodz]

I will have to say this. This Camaro was one of the best at SEMA. Tracy's interior was dead nuts on. It may have been more show than go, but I was very impressed with the little details this car had. How many noticed the brushed nickel trim? If I have to rob a bank, Tracy will be doing my Camaro when I get to that point. it was also great to hang with Kenny, Tavis and talk with Tracy about the car.

[RECOVERY ROOM]

Thanks for the kind words guys, it was a great project to work on,K D and Travis made the car easy to work on,some of the best wiring behind dash I've seen since we worked on Reactor last year,makes are job go easier when your in haulin ass mode before sema,Jason Rushforth was part of the planning on the whole project beginning to end.Still want a ride in it with the paddle shifters this summer:thumbsup:

[rocketman]

Who did the wheels? Evod do them? The car is awesome, I love the nitrous system, very clean.

[Musclerodz]

Who did the wheels? Evod do them? The car is awesome, I love the nitrous system, very clean.Evod did the wheels per Kenny.

Mike

[JayR]

Who did the wheels? Evod do them? The car is awesome, I love the nitrous system, very clean.

Evod did a great job making the wheels from my drawings to have them ready on time but I will be offering them in my line without the bowtie on the centercap very soon.

[Jason@Driverz]

Kenny/Travis,
Awesome work on this build. There are many subtle details that can be easily overlooked as stock until they are pointed out, and that is really what makes the vehicle so great to look at.

The use of nitrous is awesome, I can certainly see this on more cars in the future.

-jason

[customcam]

Trav thanks fo rthe pic any more? :)
maybe a video? :hail:

[kennyd]

i dont have a video yet because at sema i started the car and drove it in the NX booth ,then deflated the bags and burned the headers completly thru the carpet ! sometimes i cause myself more work !
marty has some build photos i will try to get him to upload some of them.

[customcam]

Cool Kd
hey were was Marty? takin pics?

[oneninesixseven]

i dont have a video yet because at sema i started the car and drove it in the NX booth ,then deflated the bags and burned the headers completly thru the carpet ! sometimes i cause myself more work !
marty has some build photos i will try to get him to upload some of them.


After the car was taken out of the booth we were the only company that had molded carpet...... in the shape of a header. :thumbsup:

Thanks Kenny!!

lol

[HRBS]

i dont have a video yet because at sema i started the car and drove it in the NX booth ,then deflated the bags and burned the headers completly thru the carpet ! sometimes i cause myself more work !
marty has some build photos i will try to get him to upload some of them.

Glad to hear your "black cloud" followed you to Vegas.
So where are you headed for vacation Kenny ?
You need one !

BTW... The car looked great.

[RECOVERY ROOM]

Don't stand next to him in a thunderstorm,lightning could strike.I got a picture of the carpet when they pulled out.

[syborg tt]

Cool Kd
hey were was Marty? takin pics?

yes I was there
yes I even took picture
But next year I'm not sharing a room - I really need sleep and these guy's don't sleep

http://www.syborgtwinturbo.com/gallery/Sema-2007

ps i'll post some build pics tommorow

[Bowtieracing]

the ZL1 emblems were made by motorhead jewlery . we sent them a factory Z28 emblem to copy .


Kenny can you get me a trio of those emblems ??

[TravisB]

Kenny can you get me a trio of those emblems ??

I already inquired about the emblems for you.....We are are going to get with our customers first to see what they want out of them.