5 Years Later - It's Not a "new" Project, And Not a New Member Anymore!!!

[syborg tt]

Good Morning All,

Quick Update - Actually just a Little Teaser

http://www.syborgtwinturbo.com/albums/Build/2009_12_02_recovery_room_3207.jpg

[syborg tt]

Baddest little truck of all time IMO, the slight color change is for the better.
And that picture of your wife is awesome!

Not my wife - but I ..........

wait i can't put that in print - nevermind

[bentfab]

Good Morning All,

Quick Update - Actually just a Little Teaser

http://www.syborgtwinturbo.com/albums/Build/2009_12_02_recovery_room_3207.jpg

Teaser !!! What is the tease ? You gotta give us something better :willy:

[radrambler]

Marty

IS THAT ALL TRACY SENT YOU ..LOL
YOU HAVE TO BE GOING NUTS..
MORE PICS TRACY


Tom

[DOOM]

Teaser !!! What is the tease ? You gotta give us something better :willy:

Marty your friggin killing us!! Are you kidding me :lolhit: TEASER

[Kendall Burleson]

That is a killer shoot of a outstanding piece 1.625 x.083 4130 tubing love it in Black:hail: :hail: :hail:

[TEDDYS CAMARO]

What A Tease! Come On Marty!! Lets See Some Pics!!!!!!

[65 347]

What A Tease! Come On Marty!! Lets See Some Pics!!!!!!

x2
Mike

[syborg tt]

Good Day All,

As Christmas is getting closer I figured it's time to do an Update.

The orginal rendering that Bob Thrash did showed the truck as an OEM Concept Vehicle.

So staying with that theme it was important to find the right Seatbellts for the truck.

http://www.syborgtwinturbo.com/albums/Build/SeatbeltPlanet_Logo_640.jpg

When I was at Sema I met Steve and his partner from Seatbletplanet.
These guys are top notch and know more then you can every imagine about seatbelts.
www.seatbeltplanet.com

The main reason we choose the belts from Seatbelt Planet is they are NHSTA approved.
Something that your standard 4 or 5 point harness are not.

Just remember, if you are in an accident and the passenger in your car is not wearing a approved seatbelt
I am willing to bet your insurance company is going to have fun with you.

http://www.syborgtwinturbo.com/albums/Build/2009_11_05_Sema_301.jpg

Another huge selling factor is there color selection, this is just a few that they had on Display at Sema.

http://www.syborgtwinturbo.com/albums/Build/2009_11_05_Sema_302.jpg

Wait, is that a Syborg T-Shirt at Sema.
Very cool

T-Shirts are available @ Mac Ink
http://www.mac-ink.com/shirts/SyborgTT.html

http://www.syborgtwinturbo.com/albums/Build/2009_11_05_Sema_853.jpg

Okay, here are the finished belts for Syborg.

http://www.syborgtwinturbo.com/albums/Build/2009_11_29_Recovery_Room_3162.jpg

Okay, we've been getting a lot of questions about the interior.
I figure it's time I start sharing some pics.

Speaker Grille for the Kicker Solo Classic S8C 8-Inch Subwoofer.

http://www.syborgtwinturbo.com/albums/Build/2009_12_01_Recovery_Room_3194.jpg

Back Wall of the truck is starting to take Shape.

http://www.syborgtwinturbo.com/albums/Build/2009_12_02_Recovery_Room_3205.jpg

Keeping with the OEM theme.
We choose Kicker for the Sound System.
Tracy is doing a great job adding all the little details to make everything look and feel OEM.
www.kicker.com

http://www.syborgtwinturbo.com/albums/Build/2009_12_03_Recovery_Room_3217.jpg

A & B Pillars have been covered in Leather.
Nice upgrade from the stock Plastic.

http://www.syborgtwinturbo.com/albums/Build/2009_12_15_Recovery_Room_IMG_3282.jpg

and finally here is a sneak peak of the dash for all that have been asking.

http://www.syborgtwinturbo.com/albums/Build/2009_12_16_Recovery_Room_IMG_3301.jpg

www.recoveryroominteriors.com

[slamdimpala]

Lookin good Marty, but you already know that. Keep those pictures coming.

[extralight]

Awesome work on the interior....you're driving us crazy with all the "previews". Marty, I was relooking at the last 18 months of post and noticed the Stainless Works Exhaust Tips. Did Kenny shape it to fit the body or did Stainless make a custom shape for you? Is the Exhaust Tips solid so they can be ground to the shape you want? Thanks!

[syborg tt]

Awesome work on the interior....you're driving us crazy with all the "previews". Marty, I was relooking at the last 18 months of post and noticed the Stainless Works Exhaust Tips. Did Kenny shape it to fit the body or did Stainless make a custom shape for you? Is the Exhaust Tips solid so they can be ground to the shape you want? Thanks!

Thank you for the compliments - Tracy & Jimmy do great work.

As for the exhaust Kenny did do some rework on them but they can pretty much custom make anything you need.

[extralight]

Marty, I've been watching your thread for the last 18 months since joining Lateral-G and while it was truly impressive watching it week to week, it was unreal looking back at what you've done. Words and pictures can't describe all the research, patience and rework you invested in getting it just right. I just moved my project from my garage to AutoKraft so I'm spending the holiday break looking at all the highly detailed projects to get ideas. Your's was on the top of my list. Any pictures, details of your final pedal assembly would be appreciated. Thanks!

[syborg tt]

Marty, I've been watching your thread for the last 18 months since joining Lateral-G and while it was truly impressive watching it week to week, it was unreal looking back at what you've done. Words and pictures can't describe all the research, patience and rework you invested in getting it just right. I just moved my project from my garage to AutoKraft so I'm spending the holiday break looking at all the highly detailed projects to get ideas. Your's was on the top of my list. Any pictures, details of your final pedal assembly would be appreciated. Thanks!

Thank you for the compliments on the project. So far everyone that has worked on this truck has been great to work with.

As for billet pedal arms those are on hold till after it get's back from Interior.

Or if your talking about the wilwood dual master I can't point you in the right direction.

[customcam]

Nice choice on the interior leather
Looking forward to seeing the seats & dash detail :thumbsup:

[badmatt]

Looks good Marty! Im in the process of doing my interior.

Matt

[badmatt]

uuuuuuuuuuuuuuupdates? :D

[syborg tt]

Good Afternoon All,

The snow at Tracy's shop has been brutal and since there has never been a
deadline on the truck I told him Family first and get to the truck when he has time.

http://www.syborgtwinturbo.com/albums/Build/2009_12_26_Recovery_Room_3417.jpg

There are not many resources for good quality parts for truck owners.
So far LMC Truck has been a life saver they seem to have every part that we have been unable to find for this build.

Instead of Tracy making a headliner from Scratch I contacted LMC truck and ordered one of there ABS Headliners.

http://www.lmctruck.com/icatalog/cst/full.aspx?Page=111

I originally ordered the headliner in black but as some of you know the interior color has changed.
Tracy removed the black material and prepped it for the new fabric.
It make life better when you start with a quality part.

http://www.syborgtwinturbo.com/albums/Build/2009_12_02_Recovery_Room_3206.jpg

Tracy & Jimmy recovered the headliner with the material that matches the interiors leather

http://www.syborgtwinturbo.com/albums/Build/2009_12_02_Recovery_Room_3211.jpg

Installed in the truck - You can start to get a feel for what the interior is going to look like once complete.

http://www.syborgtwinturbo.com/albums/Build/2009_12_13_Recovery_Room_IMG_3262.jpg

In order to make the dash look finished it was important to add a glove box door.
This will also help us if we need to get to the MSD box or the Big Stuff 3 ignition.

http://www.syborgtwinturbo.com/albums/Build/2009_12_13_Recovery_Room_IMG_3283.jpg

[bentfab]

THAT'S IT !!!!!! Your killing us with these so called getting a feel for the interior shots. Try and stand back before you take a pic.:lol:

[GregWeld]

Love it Mark!! Right on!!

Marty --- There's even a song about this... "Back that big phat A@@ up...."

[waynieZ]

That looks great, they did a nice job changing the color.

[radrambler]

TEASE

I KNOW YOU HAVE SOME BETTER PICS THAN THAT TO SHOW US....:willy:

Tom

[notorious1970]

Your doing what I did with the nova teasers....NOT FAIR!! :lol:

THAT'S IT !!!!!! Your killing us with these so called getting a feel for the interior shots. Try and stand back before you take a pic.:lol:

[syborg tt]

THAT'S IT !!!!!! Your killing us with these so called getting a feel for the interior shots. Try and stand back before you take a pic.:lol:

lol - First it was Kenny & pictures now it's Tracy thesee guys just don't like to take pictures.

I need to have someone sneek in and get pics,

[syborg tt]

Your doing what I did with the nova teasers....NOT FAIR!! :lol:

yae but i could just drive over to Troys to look at the car.

[customcam]

Not Fair lol :willy:

[RECOVERY ROOM]

I,m camera shy,He will have a whole bunch to show real fast...The truck never really had a specific time slot after Kenny had his accident,Just got it to me when they could.Marty and Kenny are both friends of mine outside of cars,And Marty said work on it when we could so I kept going on the cars that hit there scheduled dates.That also gave me the freedom to look at doing some cool things to the truck without worrying about show dates at the last minute( been there , done that , not fun.).The best part is torturing Marty..ha ha.It has been fun to work on this MINI truck ,Something different:thumbsup: I bet we lost a week of work this winter pushing and hauling snow off,Can't wait to mow grass again.

[Garage Dog 65]

Can't wait to mow grass again.


Careful what you wish for bro !

[syborg tt]

I,m camera shy,He will have a whole bunch to show real fast...The truck never really had a specific time slot after Kenny had his accident,Just got it to me when they could.Marty and Kenny are both friends of mine outside of cars,And Marty said work on it when we could so I kept going on the cars that hit there scheduled dates.That also gave me the freedom to look at doing some cool things to the truck without worrying about show dates at the last minute( been there , done that , not fun.).The best part is torturing Marty..ha ha.It has been fun to work on this MINI truck ,Something different:thumbsup: I bet we lost a week of work this winter pushing and hauling snow off,Can't wait to mow grass again.

I will say working with Kenny, Travis, Tracy & Jimmy has been pretty awesome. At first it was about building the truck and then it turned into great freindship with all of these guys.

Personally the freindship with these guys have becomre more important to me then then getting the truck done. But it will get finished and if anyone is planning on going to GG Indy or GG Columbus the truck will be at both.

PS As far as builder & interior guys you can't miss with these guys.

[RPM HOTRODS]

I'll be there and can't wait to see it in person. It is always great when the build experience is great between each other.

[GMracer]

Marty, I may have to fly out for that.... I've been following this build since day 1 and you have helped me out in more ways than one. Plus I have yet to attend a GG show.

[customcam]

Wow what a Journey!
And i dont think you will find a better bloke than Marty also! :thumbsup:

[syborg tt]

Marty, I may have to fly out for that.... I've been following this build since day 1 and you have helped me out in more ways than one. Plus I have yet to attend a GG show.

Make sure you hit the Columbus show it's one of the top five shows to hit in my opinion.

[syborg tt]

Wow what a Journey!
And i dont think you will find a better bloke than Marty also! :thumbsup:

Your not so bad either - one of these days we are going to have to meet in person.

[GMracer]

So go to Columbus over Indy? I'm not sure I'll be able to make both.

[BlackenedRR]

Marty, I may have to use GG Columbus as an excuse to go visit family in Ohio so I can see this amazing truck in person.

[Garage Dog 65]

Make sure you hit the Columbus show it's one of the top five shows to hit in my opinion.



What are the other 4 in your opinion ?

Detroit Autorama and ?

Jim

[Ketzer]

I've been chipping away at my bucket list, Columbus and Sema in '08. Detroit in a couple weeks and maybe Columbus again this year. GNRS next year and maybe try and visit a few pro shops in '11.

[syborg tt]

What are the other 4 in your opinion ?

Detroit Autorama and ?

Jim

Okay for me

Detroit Autorama

Power Tour - you must do this at least once in your life

GG Columbus

Woodward Dream Cruise

Hot August Nights

Sema

the shows that i still want to do but haven't yet

GNRS and some of those west cost shows that are warm weather friends are always talking about.

[G-Body]

I agree with that list for sure to be honest i have always dreamed of going to Sema but to be honest dosent really interest me after seeing photos this year of all the new cars and big trucks and the new 10 million 2010 camaros not real appealing anymore.
Going to my first detroit show in a few weeks cant wait, i live 120 miles from columbus and to me thats a MUST no matter what the drive.
And the woodward show seems to be the show/cruise not to miss aswell!

[Garage Dog 65]

Not sure if you're a rod guy - but being so close I'd recommend the hot rod show in Lousiville. Always some nice work there on display - like Columbus only all street rod/hot rod builds.

Marty, Thx for the list. If the weather is decent I'm driving up from Indy to Detroit - might catch you there. Jim

[COYBILT]

Warm weather yeah we Got that.


Okay for me

Detroit Autorama

Power Tour - you must do this at least once in your life

GG Columbus

Woodward Dream Cruise

Hot August Nights

Sema

the shows that i still want to do but haven't yet

GNRS and some of those west cost shows that are warm weather friends are always talking about.

[G-Body]

Ive always wanted to get to the street rod nationals down there in louisville,
UNTILLLLLL......... Last year they made a rule change where there allowing newer cars up to the 80's there and i about had a stroke shows always been 48 and back and with all the history that show has had they go and do such a change im boycotting show like 90% of all the other rodders are doing!

[syborg tt]

Good Morning All,

This post is dedicated to a good friend Dave 'Myclone"
Way back Dave said to me that he wanted to ride along in my truck once it was complete.

Unfortunately that will never happen Dave lost his life while under one of his trucks.
He was in a hurry and didn't properly set the vehicle on jack stands.
So please be careful when your working on your cars and safety first - ALWAYS !!!

http://www.syborgtwinturbo.com/albums/Build/2009_12_18_Recovery_Room_3333_2.jpg

Kenny, Tracy & I all agreed the seats needed a little modification.

http://www.syborgtwinturbo.com/albums/Build/2009_12_28_Recovery_Room_IMG_3433.jpg

Close up view of the modified seat.

http://www.syborgtwinturbo.com/albums/Build/2009_12_28_Recovery_Room_IMG_3434.jpg

Not to worry Guys there will be a headrest.
Tracy made up this little templete and sent it over to Ron @ WMC Design.

http://www.syborgtwinturbo.com/albums/Build/2009_12_29_Recovery_Room_3444.jpg

It's unfortunate that Dave won't be able to be my passenger.
But I will always remember him and know that he is riding next to me when I am driving the truck.

[GregWeld]

Sorry to hear that Marty.... That is very sad.

[tony byram]

Sorry to hear about the loss of your friend.

[tobenk]

Yea Marty sorry to hear about ur friend.

[badmatt]

Marty I miss Dave's post's RIP Dave.

[customcam]

Thats a nice gesture Marty

[radrambler]

Thats a nice gesture Marty

AWESOME GESTURE..:thumbsup:

Tom

[deuce_454]

Good Morning All,

I would like to introduce myself my name is Marty. I have been working on this project for the last couple years.

ok so you posted this in 2005 its almost tome to change the title again :-)

like the seat and dash treatment/do-over by the way... but im about ready to see you drive that thing sideways soon! enough with the tinkering.. :lol:

ps.. the sticker is heartbreaking.. really a nice gesture,

[J2SpeedandCustom]

Marty I stopped by Tracy's today and saw the progress on the truck. Jimmy is doing one hell of a job! Tracy just needs to pick up the slack...:rofl:

Seriously though truck looks awesome! :thumbsup:

[syborg tt]

Marty I stopped by Tracy's today and saw the progress on the truck. Jimmy is doing one hell of a job! Tracy just needs to pick up the slack...:rofl:

Seriously though truck looks awesome! :thumbsup:

And you didn't think to snap a few pictures for me. Your killing me.

[RECOVERY ROOM]

Marty I stopped by Tracy's today and saw the progress on the truck. Jimmy is doing one hell of a job! Tracy just needs to pick up the slack...:rofl:

Seriously though truck looks awesome! :thumbsup:

Bite me :lol:

[syborg tt]

Bite me :lol:


Kinda sounds personal but I think i'll take a pass :rofl: :rofl: :rofl: :rofl:

[badmatt]

we need more pic's!

[syborg tt]

Good Morning All,

As you know the seats have been cut down.
In order to protect my brain bucket we came up with these innovative Headrest brackets.

Tracy made a cardboard template and shipped them to Ron at Wilson Muscle cars.
www.wilsonmusclecars.com

http://www.syborgtwinturbo.com/albums/Build/2009_12_29_Recovery_Room_3444.jpg

Ron took it to the next level and created the CAD files needed to actually create the brackets
both for the headrest and the roll cage.

http://www.syborgtwinturbo.com/albums/Build/2010_01_09_WMC_233.jpg

http://www.syborgtwinturbo.com/albums/Build/2010_01_09_WMC_234.jpg

Dennis over at High Speed Welding made the roll cage brackets for us.
www.highspeedwelding.com

http://www.syborgtwinturbo.com/albums/Build/2010_02_15_Hi_Speed_IMI_001.jpg

and Finally TJ over at IMI Manufacturing in Bolingbrook, IL cut the final brackets.
e-mail: [email protected]

http://www.syborgtwinturbo.com/albums/Build/2010_02_15_Hi_Speed_IMI_005.jpg

It took a real group effort to make these things and I can't wait to see how Tracy & Jimmy finish these off.

http://www.syborgtwinturbo.com/albums/Build/2010_02_15_Hi_Speed_IMI_024.jpg

I almost forgot - The UPS Driver that came back to pick these up at my shop so we I could get these to Tracy.

[Spiffav8]

WOW! :bow:

[GMracer]

Brackets look nice, I think I understand how they'll work. But I'm curious to see them in position.

[bentfab]

Brackets look nice, I think I understand how they'll work. But I'm curious to see them in position.

Yeah !! Along with the rest of the interior :D

[J2SpeedandCustom]

Way cool Marty! I wonder how they'll look in the car...:unibrow:

[waynieZ]

Those things are awesome! This is an amazing build.

[OLDFLM]

UPS driver?

[RECOVERY ROOM]

Marty,I know how to post pics now:unibrow: (joined the modern age)

[RECOVERY ROOM]

UPS driver?

He needs to be nice to them also,They have hauled half his truck around the country

[customcam]

Tracy post up bro dont hold out on us mate lol

[RECOVERY ROOM]

Can't out of respect for the owner,Marty has been a good friend and customer I was just flipping him crap...lol

[lhkustoms]

Marty quit holding out on us and post up some current pictures :yes:

[tones2SS]

Very nice.:thumbsup:

[syborg tt]

Marty quit holding out on us and post up some current pictures :yes:

Really I am not holding out - I just haven't had any free time to post. Tracy finished the interior awhile ago and my goal is to post a few pics today.

The good news is that work has been very busy and my wife was out of the country. The good news is she's back so I should be able to post pics today.

[syborg tt]

03-22-10 Update - Dude it's Done !!!

Good Morning All,

Tracy & Jimmy finished the Interior a couple weeks ago, I just haven't had time to post pictures.

I will do my best to post a bunch of pictures this week.

http://www.syborgtwinturbo.com/albums/Build/2010_02_10_Recovery_Room_3666.jpg

http://www.syborgtwinturbo.com/albums/Build/2010_02_10_Recovery_Room_3667.jpg

Tracy wanted to move some of Autometer Gauges out of the original Dash Surround.
Big difference the new dash surround houses 5 vs. the Original one that held 9.

http://www.syborgtwinturbo.com/albums/Build/2010_02_11_Recovery_Room_3683_2.jpg

The Finished Product - much cleaner looking.

http://www.syborgtwinturbo.com/albums/Build/2010_02_11_Recovery_Room_3689_2.jpg

[syborg tt]

He needs to be nice to them also,They have hauled half his truck around the country

lol - I just saw this post - man ain't that the truth


UPS & Xpress Solutions have made a fortune on this truck.

[lhkustoms]

Marty looks awesome cant wait to see more pics congrats :thumbsup:

[GregWeld]

Looks great Marty -- but then -- I wouldn't expect anything less coming from The Recovery Room.

[tones2SS]

Looks great Marty.:thumbsup:

[RECOVERY ROOM]

Before...The box was built nice,It just didn't work with so many gauges,I used some of it
http://i338.photobucket.com/albums/n404/RECOVERYROOM1/IMG_2854.jpghttp://i338.photobucket.com/albums/n404/RECOVERYROOM1/IMG_2889.jpg

[GregWeld]

Tracy --

I thought you said you learned how to post pictures....

I'm old -- I had to go get my magnifying glass to see these...:rofl:

[ccracin]

That's looking very nice Marty. Tracy did a 1st class job. Can't wait to see it in person.:thumbsup:

[syborg tt]

Tracy --

I thought you said you learned how to post pictures....

I'm old -- I had to go get my magnifying glass to see these...:rofl:

With a little practice i am certain he can do better on the picture size :willy: :rofl:

[bentfab]

Those don't look like finished interior pics to me:question:

[HWY Nova]

Those don't look like finished interior pics to me:question:

I don't think we'll see "finished" shots until Marty's grand debut....... (wherever that will be....)


--Eric

[syborg tt]

more pics tommorow i promise

[70rs]

more pics tommorow i promise

yeah, that's what you said yesterday.......:D

Looks killer so far Marty!!:thumbsup:

[badmatt]

its tomorrow... :D

[syborg tt]

its tomorrow... :D

Nope it's actually Today

[4OfaKind]

Hey Marty where did Tracy put the remaining four gauges? Dash looks nice! :thumbsup:

Mal

[GMracer]

I'm starting to get blue balls... :_paranoid

[tones2SS]

I'm starting to get blue balls... :_paranoid

lolllllllllll........:wow: :rofl:

[syborg tt]

Good Evening All,

Sorry this post is so late.
My goal is to post every Mon & Thursday till you see the finished product.

Lets start from the beginning

http://www.syborgtwinturbo.com/albums/Build/2009_08_19_Josh_Mishler_48_001.jpg

Dave @ Comp Fabrication built the entire dash out of sheetmetal.
As you can see from the above picture we needed the extra space.
We lost a bunch of real estate when the firewall was moved back.

http://www.syborgtwinturbo.com/albums/Build/2009_09_24_Recovery_Room_2858_001.jpg

The dash mimics the Factory dash almost exactly.

http://www.syborgtwinturbo.com/albums/Build/2009_09_24_Recovery_Room_2859.jpg

Yet to install was the glove box - Not to worry that is where the interior guy's do there magic.

http://www.syborgtwinturbo.com/albums/Build/2009_12_13_Recovery_Room_3266.jpg

Making room for the Autometer gauges they removed from the Dash Surround.

http://www.syborgtwinturbo.com/albums/Build/2010_02_08_Recovery_Room_3650.jpg

New Home - right under the Vintage Air controls.

http://www.syborgtwinturbo.com/albums/Build/2010_02_08_Recovery_Room_3651.jpg

http://www.syborgtwinturbo.com/albums/Build/2010_02_10_Recovery_Room_3665.jpg

Laying the material.

http://www.syborgtwinturbo.com/albums/Build/2010_02_10_Recovery_Room_3671.jpg

Stepping up the details on the dash with some trim.

http://www.syborgtwinturbo.com/albums/Build/2010_02_11_Recovery_Room_3696_2.jpg

Two more Autometer gauges in place.

http://www.syborgtwinturbo.com/albums/Build/2010_02_12_Recovery_Room_3690.jpg

see ya next week - have a great weekend.

[tones2SS]

Looks great Marty.
Have a good one bud.:thumbsup:

[syborg tt]

Good Morning All,

So what do you do when you have a good looking center console that no longer fits the quality of the build and the future interior.
You tell the guys at Recovery Room Interiors to have at it and let them see what they can come up with.

Taking everyone way back to the beginning.
This is what we started with.

http://www.syborgtwinturbo.com/albums/Build/2002_02_06_00.jpg

When we started building the Interior at Comp Fab it was important to the project that
we maintain the factory center consule that was specific to the Syclone, Typhoon & Sonoma GT's.

http://www.syborgtwinturbo.com/albums/Build/2006_03_23_014.jpg


First version of the Interior was really nice and we all thought the factory door panels were a little weak.

http://www.syborgtwinturbo.com/albums/Build/2007_03_03_003.jpg

Starting with a clean slate -- the idea's started flying.

http://www.syborgtwinturbo.com/albums/Build/2008_08_26_Josh_24.jpg

Not sure how the color changed to tan, I think I lost the coin toss with Kenny & Tracy.

http://www.syborgtwinturbo.com/albums/Build/2009_11_29_Recovery_Room_3177.jpg

This is what we handed Tracy & Jimmy and said make it work.

http://www.syborgtwinturbo.com/albums/Build/2010_02_05_Recoery_Room_3638.jpg

If you can remember back to the last post some of the gauges came out of the dash surround which means
they need to find a new home in the center consule.

http://www.syborgtwinturbo.com/albums/Build/2010_02_05_Recoery_Room_3645.jpg

Recovering the stock consule might sound like an easy task.
I assure you it takes time and skill to get stitches to line up this nice.
Did I mention that laying the leather this tight and smooth is also a talent?

http://www.syborgtwinturbo.com/albums/Build/2010_02_08_Recovery_Room_3652.jpg

Finished gauge pod or should I say almost finished.

http://www.syborgtwinturbo.com/albums/Build/2010_02_09_Recovery_Room_3659.jpg

Not sure if you remember this original dull black shifter surround.
It's amazing what a little color can do.

http://www.syborgtwinturbo.com/albums/Build/2010_02_10_Recovery_Room_3660.jpg

Details - Simple Pin Punched material adds texture to the interior.

http://www.syborgtwinturbo.com/albums/Build/2010_02_10_Recovery_Room_3673.jpg

Autometer Gauges Installed.
More Details - Once again we made the call to Wilson Muscle Car and had them cut us some Billet Syborg Emblems.

http://www.syborgtwinturbo.com/albums/Build/2010_02_28_Recovery_Room_3841.jpg

[fleetus macmullitz]

Excellente! :thumbsup:

[badmatt]

sooo nice.

[syborg tt]

Good Morning All,

Okay looking back at the stock Door Panel we have come a long way.


http://www.syborgtwinturbo.com/albums/Build/92_Sonoma_GT_Doorpanel.jpg


In Order to Clear the new Sheetmetal Dash we had to remove the front of the door panel.


http://www.syborgtwinturbo.com/albums/Build/2006_11_04_024.jpg


Some of you may remember these trick little pieces from Air Ride / Ride Tech.
Wait till you see what we have in store for a pair of these.


http://www.syborgtwinturbo.com/albums/Build/2009_09_28_Recovery_Room_2893_001.jpg


The base panel is built and it will be the foundation for the door.

http://www.syborgtwinturbo.com/albums/Build/2009_09_30_Recovery_Room_2896_001.jpg


Door Handle / Pull built with amazing detail.


http://www.syborgtwinturbo.com/albums/Build/2010_02_15_Recovery_Room_3717.jpg


The guys at Recovery Room are always trying to One Up themselves and come up with the next cool idea.
I think there headed in the right direction with this concept.


http://www.syborgtwinturbo.com/albums/Build/2010_02_17_Recovery_Room_3737.jpg


Remember those little billet pieces from Air Ride / Ride Tech / Precision Coach Works.
Pretty cool idea.


http://www.syborgtwinturbo.com/albums/Build/2010_02_17_Recovery_Room_3740.jpg


OE Concept theme is continued and all doors must have a reflector in them.


http://www.syborgtwinturbo.com/albums/Build/2010_02_17_Recovery_Room_3745.jpg


To add detail to the leather the material was pin-punched


http://www.syborgtwinturbo.com/albums/Build/2010_02_19_Recovery_Room_3756.jpg


OE Concept again - Kicker Emblem
All the little details make the difference.


http://www.syborgtwinturbo.com/albums/Build/2010_02_19_Recovery_Room_3757.jpg


Door Panel Skin are getting ready for Material.


http://www.syborgtwinturbo.com/albums/Build/2010_02_19_Recovery_Room_3758.jpg


All together now.


http://www.syborgtwinturbo.com/albums/Build/2010_02_19_Recovery_Room_3763.jpg


Quick Close Up of the Insert.


http://www.syborgtwinturbo.com/albums/Build/2010_02_19_Recovery_Room_3765.jpg


Can't Forget the Map Pocket - just in case I get lost.
Reflector - just in case I leave the door open at night and want people to see me.


http://www.syborgtwinturbo.com/albums/Build/2010_02_19_Recovery_Room_3770.jpg


Finished Door Panel - Simple, Clean & Elegant.


http://www.syborgtwinturbo.com/albums/Build/2010_02_23_Recovery_Room_3795.jpg

[syborg tt]

I almost forgot Kenny has been working on my latest project. It still needs paint but it's cool !!
Yep Kenny likes them low

http://www.syborgtwinturbo.com/albums/Build/Lawn_Mower.jpg

[GregWeld]

Looking good Marty! But of course - with Tracy on the job - we knew it would!
:cheers:

[nvr2fst]

Marty,
Long awaited but extremely worth it. Great design Tracy and good color choice

[awr68]

That looks great! And the color choice really shows off all the detail! Great work Tracy!! :thumbsup:

[G-Body]

Tracy does have some skills looks amazing........:thumbsup:

[syborg tt]

Good Morning All,

The Debut is sent in stone 2010 Indy Good-Guys
www.good-guys.com


http://www.syborgtwinturbo.com/albums/Build/2010_06_11_GG_Indy_Logo.jpg


Syborg will be sitting in the Ridetech booth


http://www.syborgtwinturbo.com/albums/Build/Ridetech_Logo.jpg


www.ridetech.com

Stop by and check it out


http://www.syborgtwinturbo.com/albums/Build/2010_06_11_Hot_Rod_Nationals.jpg


http://www.hotrodnats.com/


Final Picture of the Truck at Recovery Room Interiors.
Getting ready to be loaded on the trailer and head back to Kenny Davis Hot Rods.


http://www.syborgtwinturbo.com/albums/Build/2010_02_28_Recovery_Room_3834.jpg


To say that I am happy with the work that was performed at the Recovery Room
would be an understatement. These guys are Top Notch !!!!
www.recoveryroominteriors.com

[Rick D]

:clap: :clap: :clap:
:woot: :woot: :woot:

Marty you must be really happy to finily have this day come. I must say it is worth it, everything about the truck is awsome. Congratulations on a job well done :cheers:

[syborg tt]

:clap: :clap: :clap:
:woot: :woot: :woot:

Marty you must be really happy to finily have this day come. I must say it is worth it, everything about the truck is awsome. Congratulations on a job well done :cheers:

Actually the truck has been in hiding in Kenny's garage for sometime and it's been killing me that I can't get down there. But it's in a happy place and it really likes it there.

[RECOVERY ROOM]

I think its been sleeping at Kenny's:unibrow:

[syborg tt]

I think its been sleeping at Kenny's:unibrow:

sleeping is a good word - it did get an alignment so it did go out in public.

[Ricochet]

Congrats Marty!! Been along time coming.

[HWY Nova]

Have you been holding out on us??!!!?????


--Eric

[tones2SS]

Very nice.
Nice to see it on the ground and a full pic of it. Looks great! I bet it runs just as good. ENJOY!!:thumbsup: :cheers:

[TEDDYS CAMARO]

LOOKS GREAT MARTY. CONGRATS! NOW, MORE INTERIOR PICS. PLEASE.:willy: :cheers: :thumbsup:

[fleetus macmullitz]

Congrats Marty! :thumbsup:

I'm looking forward to seeing a lot more of Syborg.

[68/Camaro]

:dance: :dance: Finally Congratulations Marty!! :thumbsup:Well Deserved

[syborg tt]

thanks guys.

I will do my best to get some pictures up in the next week or so. Life has been a little crazy the last few weeks. Some sad news and Som good news but life is all about balance.

All I can say is that Kenny, Travs, Kenny Sr, Tracy & Jimmy have all become like family and I look forward to working with them on the next project.

However Kenny told me if i go this crazy again he was going to kill me. Weird I actually believe him.

[RECOVERY ROOM]

So do I...LOL

[214Chevy]

I see the awesome pics of the interior coming together, but can you post some of the finished shots of the full, total effect so I can crap my pants.:rofl: :rofl:

[waynieZ]

congratulation's you have a beautiful build it came out awesome.

[nvr2fst]

Congrats ITS ABOUT TIME

[TravisB]

Have you been holding out on us??!!!?????


--Eric


yes he is and has :wow:

[RECOVERY ROOM]

Marty's a Player...:lol:

[syborg tt]

Good Morning All,

Well it's been a long time coming, the post that is.
A few pics of seats.

http://www.syborgtwinturbo.com/albums/Build/2010_02_23_Recovery_Room_3801.jpg


Check out the extra details that the guys did with the grommets.


http://www.syborgtwinturbo.com/albums/Build/2010_02_26_Recovery_Room_3809.jpg


To keep it Street legal with installed DOT approved Harness.
Trust me if your driving a car with racing harness and get pulled over they will write you a ticket.

They need all the revenue they can get.
www.seatbeltplanet.com


http://www.syborgtwinturbo.com/albums/Build/2010_02_26_Recovery_Room_3817.jpg


Floating Headrest installed.
These were the original headrest the guys did.
Tracy made new ones and Kenny hasn't sent me update pics. ( sorry Tracy )


http://www.syborgtwinturbo.com/albums/Build/2010_02_28_Recovery_Room_3825.jpg


http://www.syborgtwinturbo.com/albums/Build/2010_02_28_Recovery_Room_3831.jpg

[extralight]

Absolutely beautiful work on the seats. Love all the detail and how it flows together. Marty, what exactly makes seat harnesses "Dot" Approved? Kurt's installing 4 pt harness in my vette and I want to make sure I don't have problems as well. Where did you get them? Thanks!

[syborg tt]

Absolutely beautiful work on the seats. Love all the detail and how it flows together. Marty, what exactly makes seat harnesses "Dot" Approved? Kurt's installing 4 pt harness in my vette and I want to make sure I don't have problems as well. Where did you get them? Thanks!

Oddly enough it simple

The buckle itself has to be a single push button like we all use everday and it must have a DOT Certification. Which racing harnesses don't have.

According my insurance agent if I had a passenger in my car and he was wearing a non DOT approved belt i would be soley liable for all injuries and law suits. That is if he/she was wearing said non DOT approved belts. If they weren't wearing a belt then they would cover them. Talk about screwed up.

ps My agent is a very close friend so i value his opinion.

Also if your retrofitting belts into your car make sure you put the proper doughnut / re-enforcement plates at all mounting points.

I know juliano's make 3 point retrofit belts for muscle cars and they are also certified.

[ccracin]

Oddly enough it simple

The buckle itself has to be a single push button like we all use everday and it must have a DOT Certification. Which racing harnesses don't have.

According my insurance agent if I had a passenger in my car and he was wearing a non DOT approved belt i would be soley liable for all injuries and law suits. That is if he/she was wearing said non DOT approved belts. If they weren't wearing a belt then they would cover them. Talk about screwed up.

ps My agent is a very close friend so i value his opinion.

Also if your retrofitting belts into your car make sure you put the proper doughnut / re-enforcement plates at all mounting points.

I know juliano's make 3 point retrofit belts for muscle cars and they are also certified.

Marty,

Thanks for the info, but I have a question. I was looking around the link you provided and could not find anywhere where they stated the belts were DOT Certified. I saw a bunch about testing, but nothing about certification. Did I miss it? I would like to get this right. When it comes time to get these, I'll give them a call.

By the way, it is looking awesome. I can't wait to see it in Columbus.
:cheers:

[syborg tt]

Your welcome.

There is a cert on the belts.

Nice Guys met them at Sema Last year

Marty,

Thanks for the info, but I have a question. I was looking around the link you provided and could not find anywhere where they stated the belts were DOT Certified. I saw a bunch about testing, but nothing about certification. Did I miss it? I would like to get this right. When it comes time to get these, I'll give them a call.

By the way, it is looking awesome. I can't wait to see it in Columbus.
:cheers:

[ccracin]

Sweet, Thanks.

[E.rodz]

Marty congats. on the final leg of the journey I hope the rest of the journey is pure fun.ps.don't let your wife total up the reciepts this can be a baadd thing.LOL.hope to see this one in person some day.:thumbsup:

[toddshotrods]

Are you still bringing Syborg to Columbus Marty? Looks awesome! :thumbsup:

[syborg tt]

Are you still bringing Syborg to Columbus Marty? Looks awesome! :thumbsup:


Since the truck didn't make it to Indy - now we are going to Columbus

ps - the final tune wasn't completed thus the reason it didn't make it.

[toddshotrods]

...now we are going to Columbus...
Cool, see ya in a few weeks.

[nvr2fst]

Since the truck didn't make it to Indy - now we are going to Columbus

ps - the final tune wasn't completed thus the reason it didn't make it.

Looking forward to seeing this Marty, Ill see you down there.

[syborg tt]

Good Morning All,

I want to thank Ride-Tech for hooking us up with the spot at Good Guys Columbus.
What a great group of guys and an awesome weekend.

They truck looks awesome and I couldn't be happier.

http://www.garagescene.net/gallery2/d/54036-2/IMG_9688.JPG

[ArisESQ]

is it officially done?!?!

congrats, man! look's fantastic!

[G-Body]

Marty ive followed this build from the first post and i have to say it was like seeing a celebrity when i made the turn past the booth wow well deserved amazing lil truck with details for days,Congrats :bow:

http://i229.photobucket.com/albums/ee87/Fleetline48/48%20Pro%20Street/GoodGuys2010010.jpg
http://i229.photobucket.com/albums/ee87/Fleetline48/48%20Pro%20Street/GoodGuys2010011.jpg
http://i229.photobucket.com/albums/ee87/Fleetline48/48%20Pro%20Street/GoodGuys2010008.jpg
http://i229.photobucket.com/albums/ee87/Fleetline48/48%20Pro%20Street/GoodGuys2010459-1.jpg

[syborg tt]

Thank you very much I can't tell you happy I was when i saw it. I was pretty pumped up and the first ride was awesome. It sounds like a angry sewing machine.

Marty ive followed this build from the first post and i have to say it was like seeing a celebrity when i made the turn past the booth wow well deserved amazing lil truck with details for days,Congrats :bow:

http://i229.photobucket.com/albums/ee87/Fleetline48/48%20Pro%20Street/GoodGuys2010010.jpg
http://i229.photobucket.com/albums/ee87/Fleetline48/48%20Pro%20Street/GoodGuys2010011.jpg
http://i229.photobucket.com/albums/ee87/Fleetline48/48%20Pro%20Street/GoodGuys2010008.jpg
http://i229.photobucket.com/albums/ee87/Fleetline48/48%20Pro%20Street/GoodGuys2010459-1.jpg

[Autokraft]

Marty, saw it at Columbus. Very nice job and kudos to all invloved in the build. I would have liked to hear that motor. It is so cool:thumbsup:

[tobenk]

Awesome Marty just plain badass. How u can just enjoy it and it makes it all worth. I going to have to go to Columbus one day.

[awr68]

Congrats Marty on the first drive.....it's been a long time coming! Truck looks awesome!! :thumbsup:

[NOT A TA]

Congrats Marty! LOOKS BEAUTIFULL!!!! Too nice to drive! But do it anyway!!!!!

[Tiger]

Congrats Marty!
Its just plain beautiful

[syborg tt]

Thanks for all of the compliments on the truck. I can't wait to start the next one.

[rocketman]

Cool beer hauler. How fast is that thing anyway

[syborg tt]

Cool beer hauler. How fast is that thing anyway

Pretty darn fast - I am trying to think how Kenny put it

When you roll the throttle at 40mph you can feel it wanting to break the rear tires loose and when it does you don't even have time to look at the quages because your doing everyting you can to hang on to it.

ps - I wonder if he was wearing the harness belts

[badmatt]

video marty....

[bentfab]

Looks killer Marty. Congrats !! Now you have a truck to haul your Camaro out to California to get some plumbing done?

[syborg tt]

Looks killer Marty. Congrats !! Now you have a truck to haul your Camaro out to California to get some plumbing done?

Tahnk you very much.

However the next car is going to be a completely bolt together car.

ps Odd the new Camaro just left California

[customcam]

Marty finally got it done... So does that mean this thread disappears? Lol
Congratulations ;)

[awr68]

Marty finally got it done... So does that mean this thread disappears? Lol
Congratulations ;)

Not a chance! It wouldn't be the same around here without this thread! :lol:
Marty I say you use this thread for the Camaro build too! :thumbsup:

[syborg tt]

Not a chance! It wouldn't be the same around here without this thread! :lol:
Marty I say you use this thread for the Camaro build too! :thumbsup:

LOL that would be awesome.

So what would the new title be

[OLDFLM]

"5 Years Later - a "NEW" Project, And Not a New Member Anymore!!!"

[syborg tt]

Okay fine here we go again.

Carter has been working on the rendering and here is the start

http://www.garagescene.net/gallery2/d/57387-1/marty_test1.jpg

and the car - you can't tell me this car isn't cool

http://www.garagescene.net/gallery2/d/57390-2/2010+05-24+Camaro+005.jpg

[kennyd]

with a fabricated bike rack mounted to the rear

[jy211]

you keep'en them traction bars? :lol: :thumbsup:

[DOOM]

Okay Marty...... Lets go time is ticking we only have 4 years 364 day's left to complete this project:lolhit:

[syborg tt]

you keep'en them traction bars? :lol: :thumbsup:

I will sell them to you cheap - you pay shipping and there yours.

However they would make good Shop Artwork

[jy211]

I will sell them to you cheap - you pay shipping and there yours.

However they would make good Shop Artwork

Thanks for the offer, but I have enough aircraft parts for wall art... or to make many boat anchors! :lol: :thumbsup:

[syborg tt]

Thanks for the offer, but I have enough aircraft parts for wall art... or to make many boat anchors! :lol: :thumbsup:

Darn it I thought for sure you would help a brother out. :D

[makindue84]

Hi Jamess113. Do you think that the new Camaro project would be successful? I want to see the progress of that project. :D

[customcam]

Not a chance! It wouldn't be the same around here without this thread! :lol:
Marty I say you use this thread for the Camaro build too! :thumbsup:

You got that Rite Anthony :) , its been exciting to watch and we definately need Video of this Speed Machine torturing those BFG's :) Cant wait to see the Rat Rod Camaro also Lol

[awr68]

Marty are you still planning on driving the Camaro to SEMA with the bike on the back? How cool is that? :thumbsup:

[toddshotrods]

Camaro project looks cool. What's the plan for the truck now that it's "finished"?

[syborg tt]

Camaro project looks cool. What's the plan for the truck now that it's "finished"?


Maybe a Guest Spot on TV and then a few more shows. The actually try to drive the thing.

[Jr]

Marty,

Have you posted any video of this truck in action?

[syborg tt]

Marty,

Have you posted any video of this truck in action?

Not yet - Kenny is doing a few things to the truck and then it's headed to Sema. After Sema we will finally drive the thing

[BlackenedRR]

Marty, you got a small bit of press in the new issue of Truckin' in the SEMA projects section...

[notorious1970]

go around the block, put a mile on it, then do a burnout :thumbsup:
Enjoy it Marty! Cant wait to see it

[shadow images]

Saw the truck a SEMA, even better in person.

[rwhite692]

Marty, congrats on finishing the truck, Saw it @SEMA and it looks awesome. Must have felt great to meet that milestone! -Rob

[GregWeld]

Hey Marty! It was fun to finally meet you!

Beautiful truck.... May your next build be quicker (in build time) and drivable! :D

[syborg tt]

Hey Marty! It was fun to finally meet you!

Beautiful truck.... May your next build be quicker (in build time) and drivable! :D

Greg is was good meeting you. It was a crazy week & weekend.

Thanks again for the compliments and not to worry the next build should be complete in 18 months. Trust me i've learned a bunch building this truck.

[J2SpeedandCustom]

the next build should be complete in 18 months.

l laughed so loud when I read that!!!!! :lol:

[HWY Nova]

Greg is was good meeting you. It was a crazy week & weekend.

Thanks again for the compliments and not to worry the next build should be complete in 18 months. Trust me i've learned a bunch building this truck.

Great seeing you at SEMA!

When will you start the next "build" thread?


--Eric

[syborg tt]

Great seeing you at SEMA!

When will you start the next "build" thread?

--Eric

From my most Favorite Movie Line " 2 Weeks " (( Movie Title Money Pit )

[syborg tt]

Couple pics from the SportTruck.com

http://www.sportruck.com/events/sema-show-2010/outdoor-photos-set-2/235.jpg

http://www.sportruck.com/events/sema-show-2010/outdoor-photos-set-2/236.jpg

http://www.sportruck.com/events/sema-show-2010/outdoor-photos-set-2/237.jpg

http://www.sportruck.com/events/sema-show-2010/outdoor-photos-set-2/238.jpg

http://www.sportruck.com/events/sema-show-2010/outdoor-photos-set-2/239.jpg

http://www.sportruck.com/events/sema-show-2010/outdoor-photos-set-2/240.jpg

[bentfab]

Good job Marty ! I missed SEMA again this year. I did see pics of it and the truck looked killer.


Mark

[syborg tt]

Good job Marty ! I missed SEMA again this year. I did see pics of it and the truck looked killer.

Mark

Next year you haev to get the Invite to the Speed Tech / Killer Custom Party that seems to be the place to be on Thursday night.

[syborg tt]

l laughed so loud when I read that!!!!! :lol:

Funny I think I was lauging when I wrote it.

[tones2SS]

Very nice Marty. What an awesome truck.:thumbsup:

[E.rodz]

Marty it was great to see the truck in person.tried to find you multiple times but it never happened.truck looks great now remember what you originaly built it for and drive it lets see some qt.mile times and some rubber on the qtrs.enjoy it its the only way to get you money out of it!maybe next year i will be able to find you at the meet and greet.:D

[Musclerodz]

Nice to meet you at the Speedtech party although I don't think I introced myself. It is becoming a do not miss event. Good luck with your next project

[syborg tt]

Nice to meet you at the Speedtech party although I don't think I introced myself. It is becoming a do not miss event. Good luck with your next project

I agree the Speed Tech Party is the party to be at. I still think the house was used in a few Porn shoots.

[nvr2fst]

From my most Favorite Movie Line " 2 Weeks " (( Movie Title Money Pit )

you have 13 days left:rofl:
Heading down to Mario's shop this weekend, you in town?

[T-Type]

it was a treat being able to see the truck in person. all the pictures i've seen do not do it any justice. a true work of art.

[syborg tt]

you have 13 days left:rofl:
Heading down to Mario's shop this weekend, you in town?

Actually I am - what time you heading to the Shop.

[syborg tt]

it was a treat being able to see the truck in person. all the pictures i've seen do not do it any justice. a true work of art.

Thank you very much it has been a fun project it's time to move on to the next one.

[syborg tt]

Good Morning All,

Sema has come and gone and I didn't have a chance to do a few of the updates.
So my plan is to get them all posted by the end of the weekend.

As the truck was getting ready for it's journey to Sema we needed to finish up all of the little details.
In order to keep the Factory Prototype Theme we had a few OEM looking Decals made for the door Jamb & Core Support.
www.rev-in.com

Adam at Revolution Industries recreated the two of the factory decals with a little twist.

The door Jamb decals looks just like the factory one however a few minor changes were made.

http://www.syborgtwinturbo.com/albums/Build/syborgdoordecal.jpg

As for the Emission decal it's hard to tell it from the factory decal.

http://www.syborgtwinturbo.com/albums/Build/syborgemissionslabel.jpg

A couple more post to follow.

[ccracin]

Very nice touch Marty. Thought it was sold?

[syborg tt]

Very nice touch Marty. Thought it was sold?


Shush !!! :willy:

That' still a secret

[Blake Foster]

No it isn't!
:willy:

[syborg tt]

No it isn't!
:willy:

looks like i need to order up some stuff from Speed-Tech for the new project

[awr68]

I really like the stickers Marty....very nice touch! :thumbsup:

When do you start in on the new car? :unibrow:

[Jr]

Who bought it?

I was hoping to see some video of this car doing 50mph rolling burn outs...:thumbsup:

[ccracin]

Shush !!! :willy:

That' still a secret

I meant cold! Yeah that's it. Too cold to put stickers on!:_paranoid

[syborg tt]

Who bought it?

I was hoping to see some video of this car doing 50mph rolling burn outs...:thumbsup:


not to worry there are pictures - soon to be out

next project - started already - just haven't posted pics yet.

[Blake Foster]

looks like i need to order up some stuff from Speed-Tech for the new project

i would say.

[syborg tt]

Final Sema Pictures and it's on to the next project.

Good Morning All,

It's been a great ride and I can't tell you how much fun I've had building this truck. I made some life time memories and friends. I've learned so much building this truck and I am looking forward to sharing what I have learned with everyone
on the next project.

Here are a few final pictures I snapped of the truck while I was in Vegas.

http://www.syborgtwinturbo.com/albums/Build/2010_11_04_Sema_1.jpg

Mike Norris (( www.mikenorrismotorsports.com )) hooked us up with this nice Billet PCV catch can. It's one of the final details to complete the engine bay.

http://www.syborgtwinturbo.com/albums/Build/2010_11_04_Sema_2.jpg

Pictures of the Emission decal that Adam (( www.rev-in.com )) created for the truck. He did a great job creating it and I didn't do a bad job with the printing. Kenny was convinced it was a factory decal when he received it.

http://www.syborgtwinturbo.com/albums/Build/2010_11_04_Sema_3.jpg

Nitrous Express (( www.nitrousexpress.com )) built the intercooler chiller for the truck and I think this is the first time everyone has had a chance to see the tank mounted in the truck.

http://www.syborgtwinturbo.com/albums/Build/2010_11_04_Sema_9.jpg

In the bed of the truck are just a few of the magazine articles that featured the truck.

http://www.syborgtwinturbo.com/albums/Build/2010_11_04_Sema_442.jpg

This is the last picture I took of the truck before it headed off to it's new home. The yellow beast is the car that I drove home from Vegas.

http://www.syborgtwinturbo.com/albums/Build/2010_11_05_Bumble_Bee_12.jpg


T-Shirts are available @ Mac Ink
http://www.mac-ink.com/shirts/SyborgTT.html

[Blake Foster]

nice work pal!! gotta say i would have given up LONG ago. or finished it:lol:

whats next on your list?

[syborg tt]

nice work pal!! gotta say i would have given up LONG ago. or finished it:lol:

whats next on your list?

1970 Camaro

62 Corvette

92 Sonoma GT or 97 AWD LS1 Sonoma

in the above order

[tones2SS]

1970 Camaro
62 Corvette
92 Sonoma GT or 97 AWD LS1 Sonoma
in the above order
Very cool Marty. That '70 Camaro sounds awesome.
I would really love to see an AWD LS1 Sonoma. That would be killer indeed.:yes:

[HWY Nova]

1970 Camaro




Marty,

Is this still the plan?
http://i338.photobucket.com/albums/n408/hwynova/MartysCamaro.jpg

http://i338.photobucket.com/albums/n408/hwynova/camaroRSX_trailer2.jpg

--Eric

[RECOVERY ROOM]

I think I saw the previews and the last movie I went to.

[Alain_President]

WWWWOOOOOWWWWWWW!!!!!!!!

:thumbsup: :thumbsup: :thumbsup:

[syborg tt]

WWWWOOOOOWWWWWWW!!!!!!!!

:thumbsup: :thumbsup: :thumbsup:

Thank you

Here is one of my favorite pictures of the truck. That would be Kenny roasting the tires

[RECOVERY ROOM]

This truck just made Street Trucks top 10 builds of the year, I just saw this yesterday.

[syborg tt]

This truck just made Street Trucks top 10 builds of the year, I just saw this yesterday.

No Kidding - Looks like i have to go hunting for the magazine

[texas56]

No Kidding - Looks like i have to go hunting for the magazine



I saw it to! Congrats Marty!

[coolwelder62]

Dang,This thread's gettin pretty long also.Bump,Bump.:lol: :lol: :thumbsup:

[syborg tt]

Hello All,

First I would like to Thank Josh Mishler for taking these incredible pictures of the truck. Now I need to thank Dave at Comp Fab, Kenny, Kenny Sr & Travis at Kenny Davis Hot Rods, Bob Thrash and Tracy at Recovery Room Interiors. If it wasn't for these shops this truck would not be what is its today.

So go out and pick up the latest issue of Truckin Magazine. They did a great feature on the truck.

http://syborgtwinturbo.com/gallery3/var/albums/stjan07/2012%20Vol%2038%20No%205%20Truckin%20001.jpg

http://syborgtwinturbo.com/gallery3/var/albums/stjan07/2012%20Vol%2038%20No%205%20Truckin%20002.jpg

http://syborgtwinturbo.com/gallery3/var/albums/stjan07/2012%20Vol%2038%20No%205%20Truckin%20003.jpg

I would also like to thank all of the great vendors that participated in the build of this truck.

http://syborgtwinturbo.com/links.html

P. S. Bret thank you for selling such a great suspension product line. Your Suspension is what makes this truck look the way it does.

[HWY Nova]

Awesome build!

I remember getting turned on to this build when I saw the rear section of the chassis being designed and fabricated. It sure turned out nice!


--Eric

[syborg tt]

Thanks Eric

Awesome build!

I remember getting turned on to this build when I saw the rear section of the chassis being designed and fabricated. It sure turned out nice!


--Eric

[awr68]

Congrats Marty! Looks like a great layout!
The truck sure looks great! :thumbsup:

[waynieZ]

Congratulation's Well deserved.

[esm87gn]

Truck turned out great, I remember meeting you at Hot Rod power tour in Milwaukee a couple years back, you had the Marlboro Syclone and you telling me of this truck, and look at it now it came out incredible.

[syborg tt]

Truck turned out great, I remember meeting you at Hot Rod power tour in Milwaukee a couple years back, you had the Marlboro Syclone and you telling me of this truck, and look at it now it came out incredible.

Thank you very much

[RECOVERY ROOM]

This thread will never die:D

[TEDDYS CAMARO]

Congrats.....and I Better See You Today!!!!!! :)

[Ben@SpeedTech]

That is one seriously wicked ride dude! :clap:

[syborg tt]

That is one seriously wicked ride dude! :clap:

Thank you just wish I still I could keep them all.

I traded sold the truck at Sema and drove this home and of course I just couldn't leave it alone either.

YcLaIQ77k2I

[71MUSCLECAR]

That is one seriously wicked ride dude! :clap:

Ditto

[syborg tt]

Ditto


Thank you


Sent from my iPhone using Tapatalk

[bk2life]

nearly every picture is a dead link on this build

:(

[bk2life]

nearly every picture is a dead link on this build

:(

[syborg tt]

nearly every picture is a dead link on this build

:(

It happened years ago and I haven't had the time to fix it.

Here is a link to all 1,753 pictures of the build.

http://garagescene.net/index.php?/category/558