PDA

View Full Version : FS: New Ron Davis 67-69 Camaro radiator w/ spal fans & shroud.

69LS7
10-02-2007, 04:55 PM
.............
bigtyme1
10-02-2007, 05:15 PM
PM Sent, Does the pick and return tube have to go on the other side for LS1?
Steve1968LS2
10-02-2007, 05:17 PM
PM Sent, Does the pick and return tube have to go on the other side for LS1?

Actually that's the best way to run them (both on the pass side), provided the tubes are the right size for LSx hoses (can't remember what size they are)

it's how mine have been ran.
68protouring454
10-02-2007, 05:33 PM
would work for ls1 (edit) weird its for a bbc and inlet/outlet on same side, probably works great.
how thick is radiator and fans from mounting flange to point on fan?
jake
Steve1968LS2
10-02-2007, 05:37 PM
would not work for ls1
how thick is radiator and fans from mounting flange to point on fan?
jake

Why?

I would think it would depend on the set-back of the LSx engine and the way the air intake is routed (if you mean it's too "thick" for an LSx application).
68protouring454
10-02-2007, 05:41 PM
Why?

I would think it would depend on the set-back of the LSx engine and the way the air intake is routed (if you mean it's too "thick" for an LSx application).
did not look at pic, just it was for a bbc. sorry
simbad's68
10-02-2007, 07:05 PM
PM Sent!!
rwbbartman
10-08-2007, 03:27 PM
Is this sold yet...?
bigtyme1
10-08-2007, 05:19 PM
I passed on it, I think Sinbad was looking into it. Sounds like a good deal but the guy only had one post and I wa nervous about it.
Lenie
10-11-2007, 10:01 AM
Does anyone know if it will fit my 68 firebird 400 w/ the engine being a 400 and manual trans? Not looking for something I have to massage, looking for the correct fit. I was going to look into ron davis radiators alittle down the road but.......Could use your help, I don't know anything about radiators.
Thanks
bigtyme1
10-11-2007, 10:17 AM
I completely understand why you wouldn't want to send that much money to someone with only one post on the board. I wouldn't do it either! I was really hoping someone local would be interested in it so they could just pick it up so they wouldn't have to worry about getting ripped off.
I do have an excellent ebay reputation and would be willing to sell it thru ebay if anyone is interested.


P.S. The dual Spal Relay kit with the thermo fan switch is also included for the $800.00 price.

Tim

Did Sinbad ever get a hold of you? I know he was interested as well.
Lenie
10-11-2007, 01:24 PM
Please send me you phone # to [email protected]
Thanks Lenie