twin turbo lt1

[boonedog]

twin turbo lt1 over 1100 rwhp capable the engine is brand new here are the specs


the motor was built by B&B performance
displacement is 400 ci b=4.051 s= 3.875
callies racemaster crank
oliver billet 6 in rods
custom ross pistons -23 cc coated
billet maincaps
block has been O-ringed
AFR 215 Raised runner heads (best lt1 head you can get) ported by B&B they flow into the 330s and the buyer can have all the flow specs.
72cc chambers on the heads
cr of 8.8:1
copper head gasket
intake valve 2.125
exhst valve 1.625
valves are ferrea super alloy
comp 943-16 pacalloy (sp?) springs (cryogenicly frozen)
custom billet sollid roller cam from cam motions (specs to buyer)
crower solid roller loffset lifters
crower offset stainless shaftmount rockers
intake is a victor jr converted for fuel inj. fuel rails are from wilson manifolds.
polydyne coatings: piston tops, comb chambers. exhst ports, valve faces, bearings
custom made sheetmetal valve covers
very nice looking flexible oilpan dipstick tube (dont rememebr the brand, im sure if your interested in the motor your not to concerned about the brand of the dipstick though lol)
moroso oil pump
canton 7 qt pan
wilson 105mm tb
wilson 90 degree elbow
wilson fuel rails
shortblock $4450
top end $5500
custom alum front motor plate
turbosmart progate blow off $250.00
two precision t67 turbos they have around 1000 miles on them no shaft play $1250.00
2 air to air intercoolers each good for 750hp $420.00 each
2 autometer phantom pyrometers with probe kit $205.00 each
2 starter down pipes with 02 and egt bungs in them.
http://i223.photobucket.com/albums/dd71/boones72/th_014.jpg (http://i223.photobucket.com/albums/dd71/boones72/014.jpg)
http://i223.photobucket.com/albums/dd71/boones72/th_016.jpg (http://i223.photobucket.com/albums/dd71/boones72/016.jpg)
http://i223.photobucket.com/albums/dd71/boones72/th_013.jpg (http://i223.photobucket.com/albums/dd71/boones72/013.jpg)
http://i223.photobucket.com/albums/dd71/boones72/th_012.jpg (http://i223.photobucket.com/albums/dd71/boones72/012.jpg)
http://i223.photobucket.com/albums/dd71/boones72/th_011.jpg (http://i223.photobucket.com/albums/dd71/boones72/011.jpg)

updated list make me an offer

thanks

[Ummgawa]

Location....

[boonedog]

redding ca sorry

[tyoneal]

twin turbo lt1 over 1100 rwhp capable the engine is brand new here are the specs


the motor was built by B&B performance
displacement is 400 ci b=4.051 s= 3.875
callies racemaster crank
oliver billet 6 in rods
custom ross pistons -23 cc coated
billet maincaps
block has been O-ringed
AFR 215 Raised runner heads (best lt1 head you can get) ported by B&B they flow into the 330s and the buyer can have all the flow specs.
72cc chambers on the heads
cr of 8.8:1
copper head gasket
intake valve 2.125
exhst valve 1.625
valves are ferrea super alloy
comp 943-16 pacalloy (sp?) springs (cryogenicly frozen)
custom billet sollid roller cam from cam motions (specs to buyer)
crower solid roller loffset lifters
crower offset stainless shaftmount rockers
intake is a victor jr converted for fuel inj. fuel rails are from wilson manifolds.
polydyne coatings: piston tops, comb chambers. exhst ports, valve faces, bearings
custom made sheetmetal valve covers
very nice looking flexible oilpan dipstick tube (dont rememebr the brand, im sure if your interested in the motor your not to concerned about the brand of the dipstick though lol)
moroso oil pump
canton 7 qt pan
wilson 105mm tb
wilson 90 degree elbow
wilson fuel rails
fast 160lb injectors
mini starter
reactor products alum flex plate
321 stainless nelson racing headers for 69 camaro other apps will work
tial 44mm wastegates
msd crank trigger distributor
csi electric waterpump
two precision t67 turbos they have around 1000 miles on them no shaft play
2 air to air intercoolers each good for 750hp

the engine is brand new never fired it would cost well over 24k to duplicate this setup asking 16k obo some trades considered will try to get some pics up tommorrow.

thanks
=================================
Please send some more specs and photo's.

Thanks,

Ty

[boonedog]

ill have them to you by monday

[boonedog]

pics are now up

[crazy1969]

will you sell just the headers and how can i see the pics

[boonedog]

they should be up top what is your email and i will send them to you. I might sell them for the right price.

[VetteCam]

Yo, boonedog...I'm in Redding also. What car were you putting this thing in? I'm doing a similar build right now in a 68 Camaro.

First post on this forum but I just noticed that you mentioned being from Redding CA.
Later,
Donnie

[boonedog]

it was going in a 72 chevy pickup change of plans now though I also have a 69 camaro with a lt4 we just got up and running just need to dial her in.

thanks
boonie

[VetteCam]

Right on man! Hope to see her next year @ Kool April! My 68 should be done by then!

[boonedog]

its a red 69 mini tubbed with fikse fm5s what does yours look like and i will watch for you?

[VetteCam]

It's a black 68 will also be mini-tubbed in the near future.
Your name isn't by any chance Jesse is it? I just have a buddy up here with a red 69 with 2 black marble striped that's mini-tubbed but last time I saw the car it had a Big block?
Later,
Donnie:cheers:

[boonedog]

nope its daniel but everyone calls me boonie. Ill be lookin for your car:thumbsup:

[boonedog]

bringing this back up top got more parts for it. It is almost a complete ready to run setup a few misc items are needed. Havin a baby so i got to liquidiate.

[boonedog]

i will part this out if anyone is interested in parts. I want to keep it a shortblock at min i wont go any further down with it.

[boonedog]

guess its not the best time to be selling something like this

[camcojb]

guess its not the best time to be selling something like this

unfortunately it probably isn't. I know how fast the dollars add up, I built one myself. Good luck with your sale.

Jody

[boonedog]

thanks, if it doesnt sell ill finish it im close but i could use the cash.

[boonedog]

dropped the price 2500.00 so sending her back up

[Evaporate]

work of beauty you got there. let us know if it ever gets parted and you want to part with the heads and for what price.

[boonedog]

i put up individual pring up on the components i will also sell the complete turbo kit headers, wastegates,blowoff valve, intercoolers, 2 pyro, starter downpipes, 2 t67 turbos for $6500

[boonedog]

bumpn it back up.

[boonedog]

cmon guys no one has 18k burning a hole in there pocket?

[boonedog]

all individual components are available aswell

[boonedog]

price lowered to 16.5k one hell of a deal. Im buying a house a need the cash

[ViperBlue68]

price lowered to 16.5k one hell of a deal. Im buying a house a need the cash

I'll do your real estate, and mortgage for free for it? :unibrow: lemme know I'm a licensced R.E. agent and have also been doing mortgages since 2000

[boonedog]

its a sale between family. thanks tho

[boonedog]

updated list sold some stuff and dropped prices