Breaking NEWS Speed Tech Performance

[Blake Foster]

Been holding this back for a bit, so here goes
We at Killer Customs www.killercustoms.ca have recently purchased Speed Tech Performance www.speedtech-performance.com
I know that in the past there have been some issues with STP and our main goal is to change that. The past owners did as good a job as possible but were just overwhelmed, and i must say i can see why.

Our goal is
To increase the inventory to a level that will provide instant shipping ( please do not call TODAY and expect this service we will need a couple weeks).

To continue to develop products that work and look good ( as they have in the past).

We already have a list of products that will be released in the next 6 months.
A body upper control arms
A body lower control arms
A body upper rear trailing arms ( to complete the lowers already available)

The sub frame that was in Hot Rod mag a couple months back
this will be ready to ship some where close to the 15th of August.

We feel this will be a great tie in to what we already do and have the ability to test the products on the cars we build.

We will be looking for dealers to stock and sell the products as well.

We will be in a major transition as we hire a sales rep and build inventory.
so i ask that every one give us a chance to get everything up to speed and be able to provide the best service and product we can.

Thank you
Blake Foster

[HotRod68Camaro]

Congrats:cheers:

[ProdigyCustoms]

What a hard secret to keep. I could not be hapier for Blake and the industry to have someone come in that really is "In the business". Speedtech has always build awesome components, but the fact that it was a part time gig for the owners, and being under funded,made it difficult sometimes.

We are also honored to be able to announce that we will be using Killer Customs / Speedtechs much awaited subframe in project EmptyNest along with Air Ride Street Challenge Air Bar set up.

I personally think this subframe is going to be "Killer" for those that have already updated their stock frame with arms and such, but still really want the ability to be able to put a proper sized 275 tire and also get a nice Rack and pinion and also get some corrected geometry..

We will do lots of photos when it arrives in a few weeks, and we will do a full install story and report.

Good Luck Blake.

[Musclerodz]

Good luck! I know Speedtech needed this shot in the arm.

Mike

[Steve Chryssos]

Congrats Blake. You keepin the name? I like Killer Customs better.

[Rybar]

Congrats Blake, good news to hear. :cheers:

That subframe sounds pretty interesting. Need a local car to test it on? :unibrow:

Good for you guys though as Speedtech's customer service wasn't the greatest before, so I hope you guys will make good on that. :thumbsup:

[holschen]

The subframe looks awesome,realy looking forward to owning that!!
:thumbsup: :bow:

[pushrod243]

Congrats I wish you much sucess and will be exciting to watch you grow the company with lots of "killer" goodies for all of us..:thumbsup:

[Travis Rankin]

Woot! the word is finally out..

We've all been busting our asses here to nudge our new little addition along, and I must say it aint easy!:willy:

Thanks for the warm response, and we're stoked to give all you guys some "Killer" new products.

There have been some changes on the subframe from the pictures you've seen, just to make it that much better.

I cant wait to see it carving some hard corners, and pulling you down the straight aways!:thumbsup:

[Roadrage David]

Belive it ore not , but i was there second customer back when they started with ther tubular arms. i imorted 2 sets and some other stuf. they where very frindly and workt with us ,our custumor comends where on there site back then. i also indroduced/atended performance suspention componends to them, who now run there suspention stuff as wel. some time later for some rezen i could not get in contact with them on the phone. one thing is for sure there products are awesome. :thumbsup:

[Gandalf]

Congrats on the new aquisition Blake! I can't wait for the new subframe - woohooo! :thumbsup: Only 28 more sleeps to go.....:cool: :cool: :cool:

G.

[Blake Foster]

WOW is this the official count down??? no pressure!

I'll let Travis know hahahah

[Travis Rankin]

wow, My head hurts!!!

but it's coming together nicely.. what do we call it now Blake? version 2.0??

hmm actually maybe Version 2387646585895.0 :willy:

Loving the look now though..

We've got Emptynest' subframe all jig'd up and coming together...

Frank I hope your proud to have the first official speed tech subframe:thumbsup:

[syborg tt]

Yahoo - does this mean i need to buy a first gen camaro or an "A" body if i want sponsorship.

Cool for you guys i know you are going to take this company far. I see you guy's as the next DSE type company but in Canada.

[Blake Foster]

Marty thanks for the vote of confidance!!!!!
yes a first gen would be a good start/ or a second gen????:unibrow:

[syborg tt]

Marty thanks for the vote of confidance!!!!!
yes a first gen would be a good start/ or a second gen????:unibrow:

well i just bought a 2nd gen so it looks like were in biz-ness

[zbugger]

...or a second gen????:unibrow:

Ummm.... Excuse me? Like the Enquirer, we 2nd genners want to know!!!

[Blake Foster]

OHHH well im not going to shoot my mouth off just yet on any second gen stuff other than the upper arms we currently have and the lowers comming by SEMA????

[Tim Baillie]

Blake, got any Gbody stuff ? Need a test car to make some ? :)

[Blake Foster]

No G body stuff and no plans to do any........... sorry. gotta draw the lne some where.

[ProdigyCustoms]

Loving the look now though..

We've got Emptynest' subframe all jig'd up and coming together...

Frank I hope your proud to have the first official speed tech subframe:thumbsup:

Blake and I talked for a good while about your work on the subframe. It really sounds like were thinking everything out here. I really think you guys are oin the right track, and we look forward to selling a lot of these. I personally cannot wait to see it! Thanks for the hard work. We will make you proud!

[tyoneal]

Been holding this back for a bit, so here goes
We at Killer Customs www.killercustoms.ca have recently purchased Speed Tech Performance www.speedtech-performance.com
I know that in the past there have been some issues with STP and our main goal is to change that. The past owners did as good a job as possible but were just overwhelmed, and i must say i can see why.

Our goal is
To increase the inventory to a level that will provide instant shipping ( please do not call TODAY and expect this service we will need a couple weeks).

To continue to develop products that work and look good ( as they have in the past).
===

We already have a list of products that will be released in the next 6 months.
A body upper control arms
A body lower control arms
A body upper rear trailing arms ( to complete the lowers already available)

The sub frame that was in Hot Rod mag a couple months back
this will be ready to ship some where close to the 15th of August.

We feel this will be a great tie in to what we already do and have the ability to test the products on the cars we build.

We will be looking for dealers to stock and sell the products as well.

We will be in a major transition as we hire a sales rep and build inventory.
so i ask that every one give us a chance to get everything up to speed and be able to provide the best service and product we can.

Thank you
Blake Foster
==============================================
Blake:

Anyway you can offer a variety of choices regarding you sub frame?

For instance:

Choice of difference steering ratios?

Choice of sway bars? (Standard, Splined, adjustable)

Choice of engine platforms?

Opportunity to run a 275-305 front tire?

I look forward to hearing from you.

Many pictures over the next few months would be appreciated?

Thanks,

Ty

[ArisESQ]

i've been looking forward to hearing more info on that subframe for quite some time now. just keep us updated!

[Blake Foster]

TY

As for the options:

Different steering ratios? we feel we will use the 15:1 quick ratio
sway bar will be splined 1.25 with 4130 forged arms.
All engines should fit we are going to make the mounts in the same location as stock.
the 275-305 tire seems to be an issue at this point, we will know more later this week, we are trying to make everything work including air ride, ats spindles, coil overs.
will keep every one up to date

[rocketrod]

TY

As for the options:

Different steering ratios? we feel we will use the 15:1 quick ratio
sway bar will be splined 1.25 with 4130 forged arms.
All engines should fit we are going to make the mounts in the same location as stock.
the 275-305 tire seems to be an issue at this point, we will know more later this week, we are trying to make everything work including air ride, ats spindles, coil overs.
will keep every one up to date
:drool: I can hardly wait!! :drool: :drool: