Chassis- full tube
chassis 2x3 rectangular tube with a 12 point roll cage with a lot of extra
tubing going in.
Suspension- removable four link and a three link when we hit the road coarse
Afco coils with remote reservoirs on all four corners j-bar in the rear and coil
over front with Afco upper and lower control arms.
Motor/Trans- 496 BBC with eagle rotating assembly world products bill grumpy
jenkins heads ported and polished, 3 stage dry sump with a 3 gallon peterson
fluid systems tank. Trans will be a 4 speed Jerico road race tranny.
Wheels/Brakes- American racing Hopster 18x11 on all four corners with 315 35 18
goodyear eagle F1 rubber. Brakes are nascar short track style Brembo brakes with
13 inch rotors front and rear.
Interior- 2 kirkey aluminum racing seats and the necessary gauges not much else.
Body- stock floor was cut out to make way for the tube chassis. the body is
welded right to the frame. fiberglass front fenders and 5 inch cowl hood from
glass tec.
We eventually plan to race the car at the Silver State Classis, in Nevada. And
hop to race in other events.
Special thanks goes to- Paul and Chris Melanson, Trinity Lucero, Larry Fox, Bill
Shine and Hellfire metal works
