Supercharged 86
02-14-2007, 05:48 PM
SBC/G-body stuff for sale or trade:
Used unless it says otherwise. Open to package deals and trades. Shipping is not a problem. I'm in 08080 NJ. May add pictures later, but for now you can cruise photobucket and you'll most likely find what you're looking for.
[email protected] / 856 905 1908 CELL
http://s44.photobucket.com/albums/f11/SS86/?start=all
$2000--Hand ported Dart Pro 1 heads flowing over [email protected]. Coated chambers, Manley severe duty valves, cryo treated springs, 1.7 comp magnum rockers, girdles, cast Chevrolet valve covers, etc.
$300--th350 tranny with TCI shift kit and I believe a manual valve body. Shifted fine when last in use
$250--Crower solid roller lifters 290-66200
$200--8" Fluidampr internal balance 350
$150--Schneider roller cam 33350. .630" lift, [email protected]" duration, 322 adv duration, 112 LSA, 4000-8000rpm
$100--New Comp 7972 pushrods
$75--78 Malibu bare frame. Not bad, but some body mount holes in the rear aren't as round as they used to be.
$50--TCI circle track valvebody
$25--Stock style servo and cover from TCI powerglide
$25--87 Monte carlo LS front bumper cover
$25--Steel powerglide pan
$25--Stock Malibu front sway bar
$25--Stock Malibu upper rear control arms
$25--Stock Malibu power steering box/pitman arm
SOLD--$2000--LS1 with 70K and LS6 intake. No ECM. Needs a few parts
SOLD--010 high nickel SBC 350 block. ARP studded 4 bolt billet mains, screened, plugged, decked, line honed, .030" over, coated bearings included, etc...
SOLD--MSD digital 6
SOLD--Glasstek pin on (10 dzues) 5" Malibu hood
SOLD--$200--6 1/4" Fluidampr internal balance 350
SOLD--Stock 3.73 posi 8.5" gears, posi, axles
SOLD--67-69 F-body/68-74 Nova 1 5/8" Hedman headers/Dynomax Ultraflo bullets
SOLD--Smooth 78 Malibu front/rear bumpers
SOLD--Edelbrock RPM spread bore dual plane intake
SOLD--Cloyes hex-adjust double roller with tensioner
SOLD--Circle track valve covers with dual breathers
Used unless it says otherwise. Open to package deals and trades. Shipping is not a problem. I'm in 08080 NJ. May add pictures later, but for now you can cruise photobucket and you'll most likely find what you're looking for.
[email protected] / 856 905 1908 CELL
http://s44.photobucket.com/albums/f11/SS86/?start=all
$2000--Hand ported Dart Pro 1 heads flowing over [email protected]. Coated chambers, Manley severe duty valves, cryo treated springs, 1.7 comp magnum rockers, girdles, cast Chevrolet valve covers, etc.
$300--th350 tranny with TCI shift kit and I believe a manual valve body. Shifted fine when last in use
$250--Crower solid roller lifters 290-66200
$200--8" Fluidampr internal balance 350
$150--Schneider roller cam 33350. .630" lift, [email protected]" duration, 322 adv duration, 112 LSA, 4000-8000rpm
$100--New Comp 7972 pushrods
$75--78 Malibu bare frame. Not bad, but some body mount holes in the rear aren't as round as they used to be.
$50--TCI circle track valvebody
$25--Stock style servo and cover from TCI powerglide
$25--87 Monte carlo LS front bumper cover
$25--Steel powerglide pan
$25--Stock Malibu front sway bar
$25--Stock Malibu upper rear control arms
$25--Stock Malibu power steering box/pitman arm
SOLD--$2000--LS1 with 70K and LS6 intake. No ECM. Needs a few parts
SOLD--010 high nickel SBC 350 block. ARP studded 4 bolt billet mains, screened, plugged, decked, line honed, .030" over, coated bearings included, etc...
SOLD--MSD digital 6
SOLD--Glasstek pin on (10 dzues) 5" Malibu hood
SOLD--$200--6 1/4" Fluidampr internal balance 350
SOLD--Stock 3.73 posi 8.5" gears, posi, axles
SOLD--67-69 F-body/68-74 Nova 1 5/8" Hedman headers/Dynomax Ultraflo bullets
SOLD--Smooth 78 Malibu front/rear bumpers
SOLD--Edelbrock RPM spread bore dual plane intake
SOLD--Cloyes hex-adjust double roller with tensioner
SOLD--Circle track valve covers with dual breathers