Headers for 69 Camaro w/LS2??

[yell01]

I'm putting a supercharged LS2 into my 69 Camaro and have a Chassisworks front clip. I need headers but don't know what will fit. What are you guys running or what can you suggest.

[ProdigyCustoms]

We can probably do something with Stainless Works with that chassis. Give me a call. four zero seven 832 1752 or email [email protected]

[XcYZ]

Art Morrison (http://www.artmorrison.com/) has a new line of headers for their new subframe that I'd be willing to bet that they would fit or come very close.

[ProdigyCustoms]

Art Morrison (http://www.artmorrison.com/) has a new line of headers for their new subframe that I'd be willing to bet that they would fit or come very close.

Intersting thought. I can check on those for you also.

[tyoneal]

I'm putting a supercharged LS2 into my 69 Camaro and have a Chassisworks front clip. I need headers but don't know what will fit. What are you guys running or what can you suggest.

If you wouldn't mind, tell us about your engine, it's specs and the power you expect to get out of it.

That is the configuration I have in mind eventually and I'm looking for parts combinations to put about 550-575 hp at the Rear wheels.

Thanks,

tyoneal

[Mean 69]

That is the configuration I have in mind eventually and I'm looking for parts combinations to put about 550-575 hp at the Rear wheels.

Yeah, baby! ;)

M

On the topic, I have a set of the Hooker Super Comp engine swap headers in hand. I am going to be trial fitting into a second gen bare frame within the next few days, granted it's a different setup on the frame side, but it should at least answer first order interference issues, you might not know that they "will" fit, but you'll know if they "won't." I'll drop some pic's when available.

[yell01]

If you wouldn't mind, tell us about your engine, it's specs and the power you expect to get out of it.

That is the configuration I have in mind eventually and I'm looking for parts combinations to put about 550-575 hp at the Rear wheels.

Thanks,

tyoneal
LS2 crate motor with Magnuson SC. Heads and cam will be done and will put down around 600hp.:thumbsup:

[yell01]

Yeah, baby! ;)

M

On the topic, I have a set of the Hooker Super Comp engine swap headers in hand. I am going to be trial fitting into a second gen bare frame within the next few days, granted it's a different setup on the frame side, but it should at least answer first order interference issues, you might not know that they "will" fit, but you'll know if they "won't." I'll drop some pic's when available.
That would be great. Thanks.

[Musclerodz]

I am putting an order together for Stainless Works right now. They have a header for aftermarket clips. Give me a call for pricing.

Mike

[tyoneal]

LS2 crate motor with Magnuson SC. Heads and cam will be done and will put down around 600hp.:thumbsup:


Does, "put down around 600hp", imply that this what you would expect to be at the rear wheels?

Manual trans or Automatic??

Thanks,

TY